target/linux/bcm63xx/dts/bcm6328-adb-a4001n1.dts

   1 /dts-v1/;
   2
   3 #include "bcm6328.dtsi"
   4
   5 #include <dt-bindings/input/input.h>
   6
   7 / {
   8         model = "ADB P.DG A4001N1";
   9         compatible = "adb,a4001n1", "brcm,bcm6328";
  10
  11         aliases {
  12                 led-boot = &led_power_green;
  13                 led-failsafe = &led_power_green;
  14                 led-running = &led_power_green;
  15                 led-upgrade = &led_power_green;
  16         };
  17
  18         chosen {
  19                 bootargs = "rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
  20                 stdout-path = "serial0:115200n8";
  21         };
  22
  23         keys {
  24                 compatible = "gpio-keys-polled";
  25                 #address-cells = <1>;
  26                 #size-cells = <0>;
  27                 poll-interval = <20>;
  28
  29                 reset {
  30                         label = "reset";
  31                         gpios = <&pinctrl 23 1>;
  32                         linux,code = <KEY_RESTART>;
  33                         debounce-interval = <60>;
  34                 };
  35
  36                 wps {
  37                         label = "wlan";
  38                         gpios = <&pinctrl 24 1>;
  39                         linux,code = <KEY_WLAN>;
  40                         debounce-interval = <60>;
  41                 };
  42         };
  43
  44         leds {
  45                 compatible = "gpio-leds";
  46
  47                 inet_red {
  48                         label = "A4001N1:red:inet";
  49                         gpios = <&pinctrl 2 1>;
  50                 };
  51                 ppp_green {
  52                         label = "A4001N1:green:ppp";
  53                         gpios = <&pinctrl 3 1>;
  54                 };
  55                 led_power_green: power_green {
  56                         label = "A4001N1:green:power";
  57                         gpios = <&pinctrl 4 1>;
  58                         default-state = "on";
  59                 };
  60                 ppp_red {
  61                         label = "A4001N1:red:ppp";
  62                         gpios = <&pinctrl 5 1>;
  63                 };
  64                 usb_green {
  65                         label = "A4001N1:green:3g";
  66                         gpios = <&pinctrl 6 1>;
  67                 };
  68                 usb_red {
  69                         label = "A4001N1:red:3g";
  70                         gpios = <&pinctrl 7 1>;
  71                 };
  72                 power_red {
  73                         label = "A4001N1:red:power";
  74                         gpios = <&pinctrl 8 1>;
  75                 };
  76                 wlan_green {
  77                         label = "A4001N1:green:wlan";
  78                         gpios = <&pinctrl 9 1>;
  79                 };
  80                 wlan_red {
  81                         label = "A4001N1:red:wlan";
  82                         gpios = <&pinctrl 10 1>;
  83                 };
  84                 inet_green {
  85                         label = "A4001N1:green:inet";
  86                         gpios = <&pinctrl 11 1>;
  87                 };
  88                 eth_red {
  89                         label = "A4001N1:red:eth";
  90                         gpios = <&pinctrl 20 1>;
  91                 };
  92                 eth_green {
  93                         label = "A4001N1:green:eth";
  94                         gpios = <&pinctrl 31 1>;
  95                 };
  96         };
  97 };
  98
  99 &hsspi {
 100         status = "ok";
 101
 102         flash@0 {
 103                 compatible = "jedec,spi-nor";
 104                 spi-max-frequency = <16666667>;
 105                 spi-tx-bus-width = <2>;
 106                 spi-rx-bus-width = <2>;
 107                 reg = <0>;
 108
 109                 #address-cells = <1>;
 110                 #size-cells = <1>;
 111
 112                 partitions {
 113                         compatible = "fixed-partitions";
 114                         #address-cells = <1>;
 115                         #size-cells = <1>;
 116
 117                         cfe@0 {
 118                                 reg = <0x000000 0x010000>;
 119                                 label = "cfe";
 120                                 read-only;
 121                         };
 122
 123                         linux@10000 {
 124                                 reg = <0x010000 0xfe0000>;
 125                                 label = "linux";
 126                                 compatible = "brcm,bcm963xx-imagetag";
 127                         };
 128
 129                         nvram@ff0000 {
 130                                 reg = <0xff0000 0x010000>;
 131                                 label = "nvram";
 132                         };
 133                 };
 134         };
 135 };
 136
 137 &uart0 {
 138         status = "ok";
 139 };