target/linux/bcm63xx/dts/bcm6328-d-link-dsl-274xb-f1.dts

   1 /dts-v1/;
   2
   3 #include "bcm6328.dtsi"
   4
   5 #include <dt-bindings/input/input.h>
   6
   7 / {
   8         model = "D-Link DSL-2740B/DSL-2741B rev F1";
   9         compatible = "d-link,dsl-274xb-f1", "brcm,bcm6328";
  10
  11         aliases {
  12                 led-boot = &led_power_green;
  13                 led-failsafe = &led_power_green;
  14                 led-running = &led_power_green;
  15                 led-upgrade = &led_power_green;
  16         };
  17
  18         chosen {
  19                 bootargs = "rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
  20                 stdout-path = "serial0:115200n8";
  21         };
  22
  23         keys {
  24                 compatible = "gpio-keys-polled";
  25                 #address-cells = <1>;
  26                 #size-cells = <0>;
  27                 poll-interval = <20>;
  28
  29                 wifi {
  30                         label = "wifi";
  31                         gpios = <&pinctrl 10 1>;
  32                         linux,code = <KEY_WLAN>;
  33                         debounce-interval = <60>;
  34                 };
  35
  36                 reset {
  37                         label = "reset";
  38                         gpios = <&pinctrl 23 1>;
  39                         linux,code = <KEY_RESTART>;
  40                         debounce-interval = <60>;
  41                 };
  42
  43                 wps {
  44                         label = "wps";
  45                         gpios = <&pinctrl 24 1>;
  46                         linux,code = <KEY_WPS_BUTTON>;
  47                         debounce-interval = <60>;
  48                 };
  49         };
  50
  51         leds {
  52                 compatible = "gpio-leds";
  53
  54                 inet_red {
  55                         label = "dsl-274xb:red:internet";
  56                         gpios = <&pinctrl 2 1>;
  57                 };
  58                 dsl_green {
  59                         label = "dsl-274xb:green:dsl";
  60                         gpios = <&pinctrl 3 1>;
  61                 };
  62                 led_power_green: power_green {
  63                         label = "dsl-274xb:green:power";
  64                         gpios = <&pinctrl 4 1>;
  65                         default-state = "on";
  66                 };
  67                 power_red {
  68                         label = "dsl-274xb:red:power";
  69                         gpios = <&pinctrl 8 1>;
  70                 };
  71                 wps_blue {
  72                         label = "dsl-274xb:blue:wps";
  73                         gpios = <&pinctrl 9 1>;
  74                 };
  75                 inet_green {
  76                         label = "dsl-274xb:green:internet";
  77                         gpios = <&pinctrl 11 1>;
  78                 };
  79         };
  80 };
  81
  82 &hsspi {
  83         status = "ok";
  84
  85         flash@0 {
  86                 compatible = "jedec,spi-nor";
  87                 spi-max-frequency = <16666667>;
  88                 spi-tx-bus-width = <2>;
  89                 spi-rx-bus-width = <2>;
  90                 reg = <0>;
  91
  92                 #address-cells = <1>;
  93                 #size-cells = <1>;
  94
  95                 partitions {
  96                         compatible = "fixed-partitions";
  97                         #address-cells = <1>;
  98                         #size-cells = <1>;
  99
 100                         cfe@0 {
 101                                 reg = <0x000000 0x010000>;
 102                                 label = "cfe";
 103                                 read-only;
 104                         };
 105
 106                         linux@10000 {
 107                                 reg = <0x010000 0x7c0000>;
 108                                 label = "linux";
 109                                 compatible = "brcm,bcm963xx-imagetag";
 110                         };
 111
 112                         cal_data@7d0000 {
 113                                 reg = <0x7d0000 0x010000>;
 114                                 label = "cal_data";
 115                                 read-only;
 116                         };
 117
 118                         nvram@7e0000 {
 119                                 reg = <0x7e0000 0x020000>;
 120                                 label = "nvram";
 121                         };
 122                 };
 123         };
 124 };
 125
 126 &uart0 {
 127         status = "ok";
 128 };