target/linux/bcm63xx/dts/bcm6328-sagem-fast-2704-v2.dts

   1 /dts-v1/;
   2
   3 #include "bcm6328.dtsi"
   4
   5 #include <dt-bindings/input/input.h>
   6
   7 / {
   8         model = "Sagem F@st 2704 V2";
   9         compatible = "sagem,fast-2704-v2", "brcm,bcm6328";
  10
  11         aliases {
  12                 led-boot = &led_power_green;
  13                 led-failsafe = &led_power_green;
  14                 led-running = &led_power_green;
  15                 led-upgrade = &led_power_green;
  16         };
  17
  18         chosen {
  19                 bootargs = "rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
  20                 stdout-path = "serial0:115200n8";
  21         };
  22
  23         keys {
  24                 compatible = "gpio-keys-polled";
  25                 #address-cells = <1>;
  26                 #size-cells = <0>;
  27                 poll-interval = <20>;
  28
  29                 rfkill {
  30                         label = "rfkill";
  31                         gpios = <&pinctrl 15 1>;
  32                         linux,code = <KEY_WLAN>;
  33                         debounce-interval = <60>;
  34                 };
  35
  36                 reset {
  37                         label = "reset";
  38                         gpios = <&pinctrl 23 1>;
  39                         linux,code = <KEY_RESTART>;
  40                         debounce-interval = <60>;
  41                 };
  42
  43                 wps {
  44                         label = "wps";
  45                         gpios = <&pinctrl 24 1>;
  46                         linux,code = <KEY_WPS_BUTTON>;
  47                         debounce-interval = <60>;
  48                 };
  49         };
  50
  51         leds {
  52                 compatible = "gpio-leds";
  53
  54                 usb_green {
  55                         label = "F@ST2704V2:green:usb";
  56                         gpios = <&pinctrl 1 1>;
  57                 };
  58                 inet_red {
  59                         label = "F@ST2704V2:red:inet";
  60                         gpios = <&pinctrl 2 1>;
  61                 };
  62                 dsl_green {
  63                         label = "F@ST2704V2:green:dsl";
  64                         gpios = <&pinctrl 3 1>;
  65                 };
  66                 led_power_green: power_green {
  67                         label = "F@ST2704V2:green:power";
  68                         gpios = <&pinctrl 4 1>;
  69                         default-state = "on";
  70                 };
  71                 power_red {
  72                         label = "F@ST2704V2:red:power";
  73                         gpios = <&pinctrl 5 1>;
  74                 };
  75                 wps_green {
  76                         label = "F@ST2704V2:green:wps";
  77                         gpios = <&pinctrl 10 1>;
  78                 };
  79                 inet_green {
  80                         label = "F@ST2704V2:green:inet";
  81                         gpios = <&pinctrl 11 1>;
  82                 };
  83         };
  84 };
  85
  86 &hsspi {
  87         status = "ok";
  88
  89         flash@0 {
  90                 compatible = "jedec,spi-nor";
  91                 spi-max-frequency = <16666667>;
  92                 spi-tx-bus-width = <2>;
  93                 spi-rx-bus-width = <2>;
  94                 reg = <0>;
  95
  96                 #address-cells = <1>;
  97                 #size-cells = <1>;
  98
  99                 partitions {
 100                         compatible = "fixed-partitions";
 101                         #address-cells = <1>;
 102                         #size-cells = <1>;
 103
 104                         cfe@0 {
 105                                 reg = <0x000000 0x010000>;
 106                                 label = "cfe";
 107                                 read-only;
 108                         };
 109
 110                         linux@10000 {
 111                                 reg = <0x010000 0x7e0000>;
 112                                 label = "linux";
 113                                 compatible = "brcm,bcm963xx-imagetag";
 114                         };
 115
 116                         nvram@7f0000 {
 117                                 reg = <0x7f0000 0x010000>;
 118                                 label = "nvram";
 119                         };
 120                 };
 121         };
 122 };
 123
 124 &uart0 {
 125         status = "ok";
 126 };