target/linux/bcm63xx/dts/bcm6348-tecom-gw6200.dts

   1 /dts-v1/;
   2
   3 #include "bcm6348.dtsi"
   4
   5 #include <dt-bindings/input/input.h>
   6
   7 / {
   8         model = "TECOM GW6200";
   9         compatible = "tecom,gw6200", "brcm,bcm6348";
  10
  11         aliases {
  12                 led-boot = &led_line1_green;
  13                 led-failsafe = &led_line1_green;
  14                 led-running = &led_line1_green;
  15                 led-upgrade = &led_line1_green;
  16         };
  17
  18         chosen {
  19                 bootargs = "rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
  20                 stdout-path = "serial0:115200n8";
  21         };
  22
  23         keys {
  24                 compatible = "gpio-keys-polled";
  25                 #address-cells = <1>;
  26                 #size-cells = <0>;
  27                 poll-interval = <20>;
  28
  29                 reset {
  30                         label = "reset";
  31                         gpios = <&pinctrl 36 1>;
  32                         linux,code = <KEY_RESTART>;
  33                         debounce-interval = <60>;
  34                 };
  35         };
  36
  37         leds {
  38                 compatible = "gpio-leds";
  39
  40                 led_line1_green: line1_green {
  41                         label = "GW6200:green:line1";
  42                         gpios = <&pinctrl 4 1>;
  43                 };
  44                 line2_green {
  45                         label = "GW6200:green:line2";
  46                         gpios = <&pinctrl 5 1>;
  47                 };
  48                 line3_green {
  49                         label = "GW6200:green:line3";
  50                         gpios = <&pinctrl 6 1>;
  51                 };
  52                 tel_green {
  53                         label = "GW6200:green:tel";
  54                         gpios = <&pinctrl 7 1>;
  55                 };
  56         };
  57 };
  58
  59 &pflash {
  60         status = "ok";
  61
  62         partitions {
  63                 compatible = "fixed-partitions";
  64                 #address-cells = <1>;
  65                 #size-cells = <1>;
  66
  67                 cfe@0 {
  68                         label = "CFE";
  69                         reg = <0x000000 0x010000>;
  70                         read-only;
  71                 };
  72
  73                 linux@10000 {
  74                         label = "linux";
  75                         reg = <0x010000 0x7e0000>;
  76                         compatible = "brcm,bcm963xx-imagetag";
  77                 };
  78
  79                 nvram@7f0000 {
  80                         label = "nvram";
  81                         reg = <0x7f0000 0x010000>;
  82                 };
  83         };
  84 };
  85
  86 &pinctrl {
  87         pinctrl-names = "default";
  88         pinctrl-0 = <&pinctrl_pci &pinctrl_ext_mii &pinctrl_mii_pccard>;
  89 };
  90
  91 &uart0 {
  92         status = "ok";
  93 };