target/linux/bcm63xx/dts/bcm6368-comtrend-vr-3026e.dts

   1 /dts-v1/;
   2
   3 #include "bcm6368.dtsi"
   4
   5 #include <dt-bindings/input/input.h>
   6
   7 / {
   8         model = "Comtrend VR-3026e";
   9         compatible = "comtrend,vr-3026e", "brcm,bcm6368";
  10
  11         aliases {
  12                 led-boot = &led_power_green;
  13                 led-failsafe = &led_power_green;
  14                 led-running = &led_power_green;
  15                 led-upgrade = &led_power_green;
  16         };
  17
  18         chosen {
  19                 bootargs = "rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
  20                 stdout-path = "serial0:115200n8";
  21         };
  22
  23         keys {
  24                 compatible = "gpio-keys-polled";
  25                 #address-cells = <1>;
  26                 #size-cells = <0>;
  27                 poll-interval = <20>;
  28
  29                 reset {
  30                         label = "reset";
  31                         gpios = <&pinctrl 34 1>;
  32                         linux,code = <KEY_RESTART>;
  33                         debounce-interval = <60>;
  34                 };
  35         };
  36
  37         leds {
  38                 compatible = "gpio-leds";
  39
  40                 dsl_green {
  41                         label = "VR-3026e:green:dsl";
  42                         gpios = <&pinctrl 2 1>;
  43                 };
  44                 inet_green {
  45                         label = "VR-3026e:green:inet";
  46                         gpios = <&pinctrl 5 0>;
  47                 };
  48                 led_power_green: power_green {
  49                         label = "VR-3026e:green:power";
  50                         gpios = <&pinctrl 22 0>;
  51                         default-state = "on";
  52                 };
  53                 power_red {
  54                         label = "VR-3026e:red:power";
  55                         gpios = <&pinctrl 24 0>;
  56                 };
  57                 inet_red {
  58                         label = "VR-3026e:red:inet";
  59                         gpios = <&pinctrl 31 0>;
  60                 };
  61         };
  62 };
  63
  64 &pflash {
  65         status = "ok";
  66
  67         partitions {
  68                 compatible = "fixed-partitions";
  69                 #address-cells = <1>;
  70                 #size-cells = <1>;
  71
  72                 cfe@0 {
  73                         label = "CFE";
  74                         reg = <0x000000 0x010000>;
  75                         read-only;
  76                 };
  77
  78                 linux@10000 {
  79                         label = "linux";
  80                         reg = <0x010000 0x7e0000>;
  81                         compatible = "brcm,bcm963xx-imagetag";
  82                 };
  83
  84                 nvram@7f0000 {
  85                         label = "nvram";
  86                         reg = <0x7f0000 0x010000>;
  87                 };
  88         };
  89 };
  90
  91 &pinctrl {
  92         pinctrl-names = "default";
  93         pinctrl-0 = <&pinctrl_pci &pinctrl_ephy0_led &pinctrl_ephy1_led
  94                      &pinctrl_ephy2_led &pinctrl_ephy3_led>;
  95 };
  96
  97 &uart0 {
  98         status = "ok";
  99 };