target/linux/bcm63xx/patches-5.4/530-board_bcm6328-sercomm-ad1018.patch

   1 --- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
   2 +++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
   3 @@ -349,6 +349,71 @@ static struct board_info __initdata boar
   4         },
   5  };
   6
   7 +static struct sprom_fixup __initdata ad1018_fixups[] = {
   8 +       { .offset = 6, .value = 0x1c00 },
   9 +       { .offset = 65, .value = 0x1256 },
  10 +       { .offset = 96, .value = 0x2046 },
  11 +       { .offset = 97, .value = 0xfe69 },
  12 +       { .offset = 98, .value = 0x1726 },
  13 +       { .offset = 99, .value = 0xfa5c },
  14 +       { .offset = 112, .value = 0x2046 },
  15 +       { .offset = 113, .value = 0xfea8 },
  16 +       { .offset = 114, .value = 0x1978 },
  17 +       { .offset = 115, .value = 0xfa26 },
  18 +       { .offset = 161, .value = 0x2222 },
  19 +       { .offset = 169, .value = 0x2222 },
  20 +       { .offset = 171, .value = 0x2222 },
  21 +       { .offset = 173, .value = 0x2222 },
  22 +       { .offset = 174, .value = 0x4444 },
  23 +       { .offset = 175, .value = 0x2222 },
  24 +       { .offset = 176, .value = 0x4444 },
  25 +};
  26 +
  27 +static struct board_info __initdata board_AD1018 = {
  28 +       .name = "96328avngr",
  29 +       .expected_cpu_id = 0x6328,
  30 +
  31 +       .has_pci = 1,
  32 +       .has_ohci0 = 1,
  33 +       .has_ehci0 = 1,
  34 +       .num_usbh_ports = 1,
  35 +
  36 +       .has_enetsw = 1,
  37 +       .enetsw = {
  38 +               .used_ports = {
  39 +                       [0] = {
  40 +                               .used = 1,
  41 +                               .phy_id = 1,
  42 +                               .name = "FIBRE",
  43 +                       },
  44 +                       [1] = {
  45 +                               .used = 1,
  46 +                               .phy_id = 2,
  47 +                               .name = "LAN3",
  48 +                       },
  49 +                       [2] = {
  50 +                               .used = 1,
  51 +                               .phy_id = 3,
  52 +                               .name = "LAN2",
  53 +                       },
  54 +                       [3] = {
  55 +                               .used = 1,
  56 +                               .phy_id = 4,
  57 +                               .name = "LAN1",
  58 +                       },
  59 +               },
  60 +       },
  61 +
  62 +       .use_fallback_sprom = 1,
  63 +       .fallback_sprom = {
  64 +               .type = SPROM_BCM43217,
  65 +               .pci_bus = 1,
  66 +               .pci_dev = 0,
  67 +               .board_fixups = ad1018_fixups,
  68 +               .num_board_fixups = ARRAY_SIZE(ad1018_fixups),
  69 +       },
  70 +};
  71 +
  72  static struct sprom_fixup __initdata ar5381u_fixups[] = {
  73         { .offset = 97, .value = 0xfee5 },
  74         { .offset = 98, .value = 0x157c },
  75 @@ -1071,6 +1136,7 @@ static const struct board_info __initcon
  76  #endif /* CONFIG_BCM63XX_CPU_6318 */
  77  #ifdef CONFIG_BCM63XX_CPU_6328
  78         &board_96328avng,
  79 +       &board_AD1018,
  80         &board_AR5381u,
  81         &board_AR5387un,
  82         &board_963281TAN,
  83 @@ -1127,6 +1193,8 @@ static struct of_device_id const bcm963x
  84         { .compatible = "d-link,dsl-274xb-f1", .data = &board_dsl_274xb_f1, },
  85         { .compatible = "nucom,r5010un-v2", .data = &board_R5010UNV2, },
  86         { .compatible = "sagem,fast-2704-v2", .data = &board_FAST2704V2, },
  87 +       { .compatible = "sercomm,ad1018", .data = &board_AD1018, },
  88 +       { .compatible = "sercomm,ad1018-nor", .data = &board_AD1018, },
  89  #endif /* CONFIG_BCM63XX_CPU_6328 */
  90  #ifdef CONFIG_BCM63XX_CPU_6338
  91         { .compatible = "brcm,bcm96338gw", .data = &board_96338gw, },