target/linux/brcm63xx/dts/av4202n.dts

   1 /dts-v1/;
   2
   3 #include "bcm6368.dtsi"
   4
   5 #include <dt-bindings/gpio/gpio.h>
   6 #include <dt-bindings/input/input.h>
   7
   8 / {
   9         model = "ADB P.DG AV4202N";
  10         compatible = "adb,av4202n", "brcm,bcm6368";
  11
  12         chosen {
  13                 bootargs = "rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
  14                 stdout-path = "serial0:115200n8";
  15         };
  16
  17         gpio-keys-polled {
  18                 compatible = "gpio-keys-polled";
  19                 #address-cells = <1>;
  20                 #size-cells = <0>;
  21                 poll-interval = <20>;
  22                 debounce-interval = <60>;
  23
  24                 reset {
  25                         label = "reset";
  26                         gpios = <&pinctrl 34 GPIO_ACTIVE_LOW>;
  27                         linux,code = <KEY_RESTART>;
  28                 };
  29                 wlan {
  30                         label = "wlan";
  31                         gpios = <&pinctrl 37 GPIO_ACTIVE_LOW>;
  32                         linux,code = <KEY_WLAN>;
  33                 };
  34         };
  35
  36         gpio-leds {
  37                 compatible = "gpio-leds";
  38
  39                 power_white {
  40                         label = "AV4202N:white:power";
  41                         gpios = <&pinctrl 10 GPIO_ACTIVE_LOW>;
  42                         default-state = "on";
  43                 };
  44                 power_red {
  45                         label = "AV4202N:red:power";
  46                         gpios = <&pinctrl 11 GPIO_ACTIVE_LOW>;
  47                 };
  48                 wan_white {
  49                         label = "AV4202N:white:wan";
  50                         gpios = <&pinctrl 26 GPIO_ACTIVE_LOW>;
  51                 };
  52                 wan_red {
  53                         label = "AV4202N:red:wan";
  54                         gpios = <&pinctrl 27 GPIO_ACTIVE_LOW>;
  55                 };
  56                 phone_white {
  57                         label = "AV4202N:white:phone";
  58                         gpios = <&pinctrl 24 GPIO_ACTIVE_LOW>;
  59                 };
  60                 phone_red {
  61                         label = "AV4202N:red:phone";
  62                         gpios = <&pinctrl 25 GPIO_ACTIVE_LOW>;
  63                 };
  64                 wifi {
  65                         label = "AV4202N:blue:wifi";
  66                         gpios = <&pinctrl 22 GPIO_ACTIVE_LOW>;
  67                 };
  68         };
  69 };
  70
  71 &pflash {
  72         status = "ok";
  73
  74         linux,part-probe = "bcm63xxpart";
  75
  76         partitions {
  77                 compatible = "fixed-partitions";
  78                 #address-cells = <1>;
  79                 #size-cells = <1>;
  80
  81                 cfe@0 {
  82                         label = "CFE";
  83                         reg = <0x000000 0x020000>;
  84                         read-only;
  85                 };
  86
  87                 linux@20000 {
  88                         label = "linux";
  89                         reg = <0x020000 0xfc0000>;
  90                         compatible = "brcm,bcm963xx-imagetag";
  91                 };
  92
  93                 nvram@fe0000 {
  94                         label = "nvram";
  95                         reg = <0xfe0000 0x020000>;
  96                 };
  97         };
  98 };
  99
 100 &uart0 {
 101         status = "ok";
 102 };