target/linux/brcm63xx/dts/cpva642.dts

   1 /dts-v1/;
   2
   3 #include "bcm6358.dtsi"
   4
   5 #include <dt-bindings/input/input.h>
   6
   7 / {
   8         model = "Telsey CPVA642-type (CPA-ZNTE60T)";
   9         compatible = "telsey,cpva642", "brcm,bcm6358";
  10
  11         chosen {
  12                 bootargs = "root=/dev/mtdblock2 rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
  13         };
  14
  15         gpio-keys-polled {
  16                 compatible = "gpio-keys-polled";
  17                 #address-cells = <1>;
  18                 #size-cells = <0>;
  19                 poll-interval = <20>;
  20                 debounce-interval = <60>;
  21
  22                 reset {
  23                         label = "reset";
  24                         gpios = <&gpio1 4 1>;
  25                         linux,code = <KEY_RESTART>;
  26                 };
  27                 wps {
  28                         label = "wps";
  29                         gpios = <&gpio1 5 0>;
  30                         linux,code = <KEY_WPS_BUTTON>;
  31                 };
  32         };
  33
  34         gpio-leds {
  35                 compatible = "gpio-leds";
  36
  37                 eth_green {
  38                         label = "CPVA642:green:ether";
  39                         gpios = <&gpio0 1 1>;
  40                 };
  41                 phone2_green {
  42                         label = "CPVA642:green:phone2";
  43                         gpios = <&gpio0 2 1>;
  44                 };
  45                 usb_green {
  46                         label = "CPVA642:green:usb";
  47                         gpios = <&gpio0 3 1>;
  48                 };
  49                 phone1_green {
  50                         label = "CPVA642:green:phone1";
  51                         gpios = <&gpio0 4 1>;
  52                 };
  53                 wifi_red {
  54                         label = "CPVA642:red:wifi";
  55                         gpios = <&gpio0 6 1>;
  56                 };
  57                 link_red {
  58                         label = "CPVA642:red:link";
  59                         gpios = <&gpio0 9 1>;
  60                 };
  61                 link_green {
  62                         label = "CPVA642:green:link";
  63                         gpios = <&gpio0 10 1>;
  64                 };
  65                 power_green {
  66                         label = "CPVA642:green:power";
  67                         gpios = <&gpio0 11 1>;
  68                         default-state = "on";
  69                 };
  70                 power_red {
  71                         label = "CPVA642:red:power";
  72                         gpios = <&gpio0 14 1>;
  73                 };
  74                 wifi_green {
  75                         label = "CPVA642:green:wifi";
  76                         gpios = <&gpio0 28 0>;
  77                 };
  78         };
  79 };
  80
  81 &pflash {
  82         status = "ok";
  83
  84         linux,part-probe = "bcm63xxpart";
  85
  86         cfe@0 {
  87                 label = "CFE";
  88                 reg = <0x000000 0x010000>;
  89                 read-only;
  90         };
  91
  92         linux@10000 {
  93                 label = "linux";
  94                 reg = <0x010000 0x7e0000>;
  95         };
  96
  97         nvram@7f0000 {
  98                 label = "nvram";
  99                 reg = <0x7f0000 0x010000>;
 100         };
 101 };