kernel: enable EXPORTFS by default
[openwrt/openwrt.git] / target / linux / brcm63xx / dts / dg834g_v4.dts
1 /dts-v1/;
2
3 #include "bcm6348.dtsi"
4
5 #include <dt-bindings/input/input.h>
6
7 / {
8 model = "Netgear DG834G v4";
9 compatible = "netgear,dg834g-v4", "brcm,bcm6348";
10
11 chosen {
12 bootargs = "rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
13 stdout-path = "serial0:115200n8";
14 };
15
16 gpio-keys-polled {
17 compatible = "gpio-keys-polled";
18 #address-cells = <1>;
19 #size-cells = <0>;
20 poll-interval = <20>;
21 debounce-interval = <60>;
22
23 reset {
24 label = "reset";
25 gpios = <&pinctrl 6 1>;
26 linux,code = <KEY_RESTART>;
27 };
28 };
29
30 gpio-leds {
31 compatible = "gpio-leds";
32
33 power_green {
34 label = "96348W3:green:power";
35 gpios = <&pinctrl 0 1>;
36 default-state = "on";
37 };
38 status {
39 label = "96348W3:red:power";
40 gpios = <&pinctrl 1 1>;
41 };
42 inet_green {
43 label = "96348W3::adsl";
44 gpios = <&pinctrl 2 1>;
45 };
46 inet_red {
47 label = "96348W3::internet";
48 gpios = <&pinctrl 3 1>;
49 };
50 };
51 };
52
53 &pflash {
54 status = "ok";
55
56 linux,part-probe = "bcm63xxpart";
57
58 partitions {
59 compatible = "fixed-partitions";
60 #address-cells = <1>;
61 #size-cells = <1>;
62
63 cfe@0 {
64 label = "CFE";
65 reg = <0x000000 0x010000>;
66 read-only;
67 };
68
69 linux@10000 {
70 label = "linux";
71 reg = <0x010000 0x3e0000>;
72 compatible = "brcm,bcm963xx-imagetag";
73 };
74
75 nvram@3f0000 {
76 label = "nvram";
77 reg = <0x3f0000 0x010000>;
78 };
79 };
80 };
81
82 &pinctrl {
83 pinctrl-names = "default";
84 pinctrl-0 = <&pinctrl_pci &pinctrl_ext_mii>;
85 };
86
87 &uart0 {
88 status = "ok";
89 };