target/linux/brcm63xx/dts/dsl-274xb-c.dts

   1 /dts-v1/;
   2
   3 #include "bcm6358.dtsi"
   4
   5 #include <dt-bindings/input/input.h>
   6
   7 / {
   8         model = "D-Link DSL-2740B/DSL-2741B rev C2/3";
   9         compatible = "d-link,dsl-274xb-c2", "brcm,bcm6358";
  10
  11         chosen {
  12                 bootargs = "rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
  13                 stdout-path = "serial0:115200n8";
  14         };
  15
  16         gpio-keys-polled {
  17                 compatible = "gpio-keys-polled";
  18                 #address-cells = <1>;
  19                 #size-cells = <0>;
  20                 poll-interval = <20>;
  21                 debounce-interval = <60>;
  22
  23                 reset {
  24                         label = "reset";
  25                         gpios = <&pinctrl 34 1>;
  26                         linux,code = <KEY_RESTART>;
  27                 };
  28         };
  29
  30         gpio-leds {
  31                 compatible = "gpio-leds";
  32
  33                 inet_green {
  34                         label = "dsl-274xb:green:internet";
  35                         gpios = <&pinctrl 2 0>;
  36                 };
  37                 power_red {
  38                         label = "dsl-274xb:red:power";
  39                         gpios = <&pinctrl 4 1>;
  40                 };
  41                 power_green {
  42                         label = "dsl-274xb:green:power";
  43                         gpios = <&pinctrl 5 1>;
  44                         default-state = "on";
  45                 };
  46                 dsl_green {
  47                         label = "dsl-274xb:green:adsl";
  48                         gpios = <&pinctrl 9 1>;
  49                 };
  50                 inet_red {
  51                         label = "dsl-274xb:red:internet";
  52                         gpios = <&pinctrl 10 0>;
  53                 };
  54         };
  55 };
  56
  57 &pflash {
  58         status = "ok";
  59
  60         linux,part-probe = "bcm63xxpart";
  61
  62         partitions {
  63                 compatible = "fixed-partitions";
  64                 #address-cells = <1>;
  65                 #size-cells = <1>;
  66
  67                 cfe@0 {
  68                         label = "CFE";
  69                         reg = <0x000000 0x010000>;
  70                         read-only;
  71                 };
  72
  73                 linux@10000 {
  74                         label = "linux";
  75                         reg = <0x010000 0x3e0000>;
  76                         compatible = "brcm,bcm963xx-imagetag";
  77                 };
  78
  79                 nvram@3f0000 {
  80                         label = "nvram";
  81                         reg = <0x3f0000 0x010000>;
  82                 };
  83         };
  84 };
  85
  86 &uart0 {
  87         status = "ok";
  88 };