target/linux/brcm63xx/dts/evg2000.dts

   1 /dts-v1/;
   2
   3 #include "bcm6368.dtsi"
   4
   5 #include <dt-bindings/input/input.h>
   6
   7 / {
   8         model = "Netgear EVG2000";
   9         compatible = "netgear,evg2000", "brcm,bcm6368";
  10
  11         chosen {
  12                 bootargs = "root=/dev/mtdblock2 rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
  13                 stdout-path = "serial0:115200n8";
  14         };
  15
  16         gpio-keys-polled {
  17                 compatible = "gpio-keys-polled";
  18                 #address-cells = <1>;
  19                 #size-cells = <0>;
  20                 poll-interval = <20>;
  21                 debounce-interval = <60>;
  22
  23                 reset {
  24                         label = "reset";
  25                         gpios = <&pinctrl 25 1>;
  26                         linux,code = <KEY_RESTART>;
  27                 };
  28                 wps {
  29                         label = "wps";
  30                         gpios = <&pinctrl 26 1>;
  31                         linux,code = <KEY_WPS_BUTTON>;
  32                 };
  33         };
  34
  35         gpio-leds {
  36                 compatible = "gpio-leds";
  37
  38                 voip1_green {
  39                         label = "EVG2000:green:voip1";
  40                         gpios = <&pinctrl 14 1>;
  41                 };
  42                 voip2_green {
  43                         label = "EVG2000:green:voip2";
  44                         gpios = <&pinctrl 2 1>;
  45                 };
  46                 inet_red {
  47                         label = "EVG2000:red:inet";
  48                         gpios = <&pinctrl 4 1>;
  49                 };
  50                 inet_green {
  51                         label = "EVG2000:green:inet";
  52                         gpios = <&pinctrl 5 1>;
  53                 };
  54                 usb_green {
  55                         label = "EVG2000:green:usb";
  56                         gpios = <&pinctrl 15 1>;
  57                 };
  58                 power_green {
  59                         label = "EVG2000:green:power";
  60                         gpios = <&pinctrl 22 1>;
  61                         default-state = "on";
  62                 };
  63                 power_red {
  64                         label = "EVG2000:red:power";
  65                         gpios = <&pinctrl 23 1>;
  66                 };
  67                 lan_green {
  68                         label = "EVG2000:green:lan";
  69                         gpios = <&pinctrl 24 1>;
  70                 };
  71                 wireless_green {
  72                         label = "EVG2000:green:wireless";
  73                         gpios = <&pinctrl 26 1>;
  74                 };
  75                 wan_green {
  76                         label = "EVG2000:green:wan";
  77                         gpios = <&pinctrl 27 1>;
  78                 };
  79         };
  80 };
  81
  82 &pflash {
  83         status = "ok";
  84
  85         linux,part-probe = "bcm63xxpart";
  86
  87         cfe@0 {
  88                 label = "CFE";
  89                 reg = <0x00000000 0x00020000>;
  90                 read-only;
  91         };
  92
  93         linux@20000 {
  94                 label = "linux";
  95                 reg = <0x00020000 0x00f40000>;
  96         };
  97
  98         board_data@f60000 {
  99                 label = "board_data";
 100                 reg = <0x00f60000 0x00080000>;
 101                 read-only;
 102         };
 103
 104         nvram@fe0000 {
 105                 label = "nvram";
 106                 reg = <0x00fe0000 0x00020000>;
 107         };
 108 };
 109
 110 &pinctrl {
 111         pinctrl-names = "default";
 112         pinctrl-0 = <&pinctrl_pci>;
 113 };
 114
 115 &uart0 {
 116         status = "ok";
 117 };