target/linux/brcm63xx/dts/fast2704n.dts

   1 /dts-v1/;
   2
   3 #include "bcm6318.dtsi"
   4
   5 #include <dt-bindings/input/input.h>
   6
   7 / {
   8         model = "Sagem F@ST2704N";
   9         compatible = "sagem,f@st2704n", "brcm,bcm6318";
  10
  11         chosen {
  12                 bootargs = "root=/dev/mtdblock2 rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
  13         };
  14
  15         gpio-keys-polled {
  16                 compatible = "gpio-keys-polled";
  17                 #address-cells = <1>;
  18                 #size-cells = <0>;
  19                 poll-interval = <20>;
  20                 debounce-interval = <60>;
  21
  22                 wlan {
  23                         label = "wlan";
  24                         gpios = <&pinctrl 1 0>;
  25                         linux,code = <KEY_WLAN>;
  26                 };
  27                 wps {
  28                         label = "wps";
  29                         gpios = <&pinctrl 33 1>;
  30                         linux,code = <KEY_WPS_BUTTON>;
  31                 };
  32                 reset {
  33                         label = "reset";
  34                         gpios = <&pinctrl 34 1>;
  35                         linux,code = <KEY_RESTART>;
  36                 };
  37         };
  38
  39         gpio-leds {
  40                 compatible = "gpio-leds";
  41
  42                 wps_green {
  43                         label = "F@ST2704N:green:wps";
  44                         gpios = <&pinctrl 2 1>;
  45                 };
  46                 lan1_green {
  47                         label = "F@ST2704N:green:lan1";
  48                         gpios = <&pinctrl 4 1>;
  49                 };
  50                 lan2_green {
  51                         label = "F@ST2704N:green:lan2";
  52                         gpios = <&pinctrl 5 1>;
  53                 };
  54                 lan3_green {
  55                         label = "F@ST2704N:green:lan3";
  56                         gpios = <&pinctrl 6 1>;
  57                 };
  58                 lan4_green {
  59                         label = "F@ST2704N:green:lan4";
  60                         gpios = <&pinctrl 7 1>;
  61                 };
  62                 inet_green {
  63                         label = "F@ST2704N:green:inet";
  64                         gpios = <&pinctrl 8 1>;
  65                 };
  66                 inet_red {
  67                         label = "F@ST2704N:red:inet";
  68                         gpios = <&pinctrl 9 1>;
  69                 };
  70                 dsl_green {
  71                         label = "F@ST2704N:green:dsl";
  72                         gpios = <&pinctrl 10 1>;
  73                 };
  74                 power_red {
  75                         label = "F@ST2704N:red:power";
  76                         gpios = <&pinctrl 11 1>;
  77                 };
  78                 power_green {
  79                         label = "F@ST2704N:green:power";
  80                         gpios = <&pinctrl 47 1>;
  81                         default-state = "on";
  82                 };
  83                 usb_green {
  84                         label = "F@ST2704N:green:usb";
  85                         gpios = <&pinctrl 49 1>;
  86                 };
  87         };
  88 };
  89
  90 &hsspi {
  91         status = "ok";
  92
  93         flash@0 {
  94                 compatible = "jedec,spi-nor";
  95                 spi-max-frequency = <62500000>;
  96                 spi-tx-bus-width = <2>;
  97                 spi-rx-bus-width = <2>;
  98                 reg = <0>;
  99
 100                 #address-cells = <1>;
 101                 #size-cells = <1>;
 102
 103                 linux,part-probe = "bcm63xxpart";
 104
 105                 cfe@0 {
 106                         reg = <0x000000 0x010000>;
 107                         label = "cfe";
 108                         read-only;
 109                 };
 110
 111                 linux@10000 {
 112                         reg = <0x010000 0x7e0000>;
 113                         label = "linux";
 114                 };
 115
 116                 nvram@7f0000 {
 117                         reg = <0x7f0000 0x010000>;
 118                         label = "nvram";
 119                 };
 120         };
 121 };