target/linux/brcm63xx/dts/rg100a.dts

   1 /dts-v1/;
   2
   3 #include "bcm6358.dtsi"
   4
   5 #include <dt-bindings/input/input.h>
   6
   7 / {
   8         model = "Alcatel RG100A";
   9         compatible = "alcatel,rg100a", "brcm,bcm6358";
  10
  11         chosen {
  12                 bootargs = "rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
  13                 stdout-path = "serial0:115200n8";
  14         };
  15
  16         gpio-leds {
  17                 compatible = "gpio-leds";
  18
  19                 stop_green {
  20                         label = "96358VW2:green:stop";
  21                         gpios = <&pinctrl 4 1>;
  22                 };
  23                 power_green {
  24                         label = "96358VW2:green:power";
  25                         gpios = <&pinctrl 5 1>;
  26                         default-state = "on";
  27                 };
  28                 adsl_green {
  29                         label = "96358VW2:green:adsl";
  30                         gpios = <&pinctrl 22 1>;
  31                 };
  32                 ppp_fail_green {
  33                         label = "96358VW2:green:ppp-fail";
  34                         gpios = <&pinctrl 23 0>;
  35                 };
  36         };
  37 };
  38
  39 &pflash {
  40         status = "ok";
  41
  42         linux,part-probe = "bcm63xxpart";
  43
  44         partitions {
  45                 compatible = "fixed-partitions";
  46                 #address-cells = <1>;
  47                 #size-cells = <1>;
  48
  49                 cfe@0 {
  50                         label = "CFE";
  51                         reg = <0x000000 0x020000>;
  52                         read-only;
  53                 };
  54
  55                 linux@20000 {
  56                         label = "linux";
  57                         reg = <0x020000 0xfc0000>;
  58                         compatible = "brcm,bcm963xx-imagetag";
  59                 };
  60
  61                 nvram@fe0000 {
  62                         label = "nvram";
  63                         reg = <0xfe0000 0x020000>;
  64                 };
  65         };
  66 };
  67
  68 &uart0 {
  69         status = "ok";
  70 };