target/linux/brcm63xx/dts/v2110.dts

   1 /dts-v1/;
   2
   3 #include "bcm6348.dtsi"
   4
   5 #include <dt-bindings/input/input.h>
   6
   7 / {
   8         model = "BT Voyager 2110";
   9         compatible = "bt,v2110", "brcm,bcm6348";
  10
  11         chosen {
  12                 bootargs = "root=/dev/mtdblock2 rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
  13                 stdout-path = "serial0:115200n8";
  14         };
  15
  16         gpio-keys-polled {
  17                 compatible = "gpio-keys-polled";
  18                 #address-cells = <1>;
  19                 #size-cells = <0>;
  20                 poll-interval = <20>;
  21                 debounce-interval = <60>;
  22
  23                 reset {
  24                         label = "reset";
  25                         gpios = <&pinctrl 33 1>;
  26                         linux,code = <KEY_RESTART>;
  27                 };
  28         };
  29
  30         gpio-leds {
  31                 compatible = "gpio-leds";
  32
  33                 power_green {
  34                         label = "V2110:green:power";
  35                         gpios = <&pinctrl 0 1>;
  36                 };
  37                 power_red {
  38                         label = "V2110:red:power";
  39                         gpios = <&pinctrl 1 1>;
  40                 };
  41                 adsl_green {
  42                         label = "V2110:green:adsl";
  43                         gpios = <&pinctrl 2 1>;
  44                 };
  45                 ppp_green {
  46                         label = "V2110:green:ppp";
  47                         gpios = <&pinctrl 3 1>;
  48                 };
  49                 wireless_green {
  50                         label = "V2110:green:wireless";
  51                         gpios = <&pinctrl 6 1>;
  52                 };
  53         };
  54 };
  55
  56 &pflash {
  57         status = "ok";
  58
  59         linux,part-probe = "bcm63xxpart";
  60
  61         cfe@0 {
  62                 label = "CFE";
  63                 reg = <0x000000 0x010000>;
  64                 read-only;
  65         };
  66
  67         linux@10000 {
  68                 label = "linux";
  69                 reg = <0x010000 0x3e0000>;
  70         };
  71
  72         nvram@3f0000 {
  73                 label = "nvram";
  74                 reg = <0x3f0000 0x010000>;
  75         };
  76 };
  77
  78 &pinctrl {
  79         pinctrl-names = "default";
  80         pinctrl-0 = <&pinctrl_pci &pinctrl_ext_mii>;
  81 };
  82
  83 &uart0 {
  84         status = "ok";
  85 };