target/linux/brcm63xx/dts/wap-5813n.dts

   1 /dts-v1/;
   2
   3 /include/ "bcm6368.dtsi"
   4
   5 / {
   6         model = "Comtrend WAP-5813n";
   7         compatible = "comtrend,wap-5813n", "brcm,bcm6368";
   8
   9         gpio-keys-polled {
  10                 compatible = "gpio-keys-polled";
  11                 #address-cells = <1>;
  12                 #size-cells = <0>;
  13                 poll-interval = <20>;
  14                 debounce-interval = <60>;
  15
  16                 wlan {
  17                         label = "wlan";
  18                         gpios = <&gpio1 0 1>;
  19                         linux,code = <0xee>;
  20                 };
  21                 reset {
  22                         label = "reset";
  23                         gpios = <&gpio1 2 1>;
  24                         linux,code = <0x198>;
  25                 };
  26                 wps {
  27                         label = "wps";
  28                         gpios = <&gpio1 3 1>;
  29                         linux,code = <0x211>;
  30                 };
  31         };
  32
  33         gpio-leds {
  34                 compatible = "gpio-leds";
  35
  36                 inet_green {
  37                         label = "WAP-5813n:green:inet";
  38                         gpios = <&gpio0 5 0>;
  39                 };
  40                 power_green {
  41                         label = "WAP-5813n:green:power";
  42                         gpios = <&gpio0 22 0>;
  43                         default-state = "on";
  44                 };
  45                 wps_green {
  46                         label = "WAP-5813n:green:wps";
  47                         gpios = <&gpio0 23 1>;
  48                 };
  49                 power_red {
  50                         label = "WAP-5813n:red:power";
  51                         gpios = <&gpio0 24 0>;
  52                 };
  53                 inet_red {
  54                         label = "WAP-5813n:red:inet";
  55                         gpios = <&gpio0 31 0>;
  56                 };
  57         };
  58 };
  59
  60 &pflash {
  61         status = "ok";
  62
  63         linux,part-probe = "bcm63xxpart";
  64
  65         cfe@0 {
  66                 label = "CFE";
  67                 reg = <0x000000 0x010000>;
  68                 read-only;
  69         };
  70
  71         linux@10000 {
  72                 label = "linux";
  73                 reg = <0x010000 0x7e0000>;
  74         };
  75
  76         nvram@7f0000 {
  77                 label = "nvram";
  78                 reg = <0x7f0000 0x010000>;
  79         };
  80 };