69b6c2591c7783ec00175a19954cc186daf0f260
[openwrt/openwrt.git] / target / linux / ipq40xx / base-files / etc / hotplug.d / firmware / 11-ath10k-caldata
1 #!/bin/sh
2
3 # xor multiple hex values of the same length
4 xor() {
5 local val
6 local ret="0x$1"
7 local retlen=${#1}
8
9 shift
10 while [ -n "$1" ]; do
11 val="0x$1"
12 ret=$((ret ^ val))
13 shift
14 done
15
16 printf "%0${retlen}x" "$ret"
17 }
18
19 ath10kcal_die() {
20 echo "ath10cal: " "$*"
21 exit 1
22 }
23
24 ath10kcal_extract() {
25 local part=$1
26 local offset=$2
27 local count=$3
28 local mtd
29
30 mtd=$(find_mtd_chardev $part)
31 [ -n "$mtd" ] || \
32 ath10kcal_die "no mtd device found for partition $part"
33
34 dd if=$mtd of=/lib/firmware/$FIRMWARE bs=1 skip=$offset count=$count 2>/dev/null || \
35 ath10kcal_die "failed to extract calibration data from $mtd"
36 }
37
38 ath10kcal_ubi_extract() {
39 local part=$1
40 local offset=$2
41 local count=$3
42 local ubidev
43 local ubi
44
45 . /lib/upgrade/nand.sh
46
47 ubidev=$(nand_find_ubi $CI_UBIPART)
48 ubi=$(nand_find_volume $ubidev $part)
49 [ -n "$ubi" ] || \
50 ath10kcal_die "no UBI volume found for $part"
51
52 dd if=/dev/$ubi of=/lib/firmware/$FIRMWARE bs=1 skip=$offset count=$count 2>/dev/null || \
53 ath10kcal_die "failed to extract from $ubi"
54 }
55
56 ath10kcal_patch_mac_crc() {
57 local mac=$1
58 local mac_offset=6
59 local chksum_offset=2
60 local xor_mac
61 local xor_fw_mac
62 local xor_fw_chksum
63
64 [ -z "$mac" ] && return
65
66 xor_fw_mac=$(hexdump -v -n 6 -s $mac_offset -e '/1 "%02x"' /lib/firmware/$FIRMWARE)
67 xor_fw_mac="${xor_fw_mac:0:4} ${xor_fw_mac:4:4} ${xor_fw_mac:8:4}"
68
69 macaddr_2bin $mac | dd of=/lib/firmware/$FIRMWARE conv=notrunc bs=1 seek=6 count=6
70
71 xor_mac=${mac//:/}
72 xor_mac="${xor_mac:0:4} ${xor_mac:4:4} ${xor_mac:8:4}"
73
74 xor_fw_chksum=$(hexdump -v -n 2 -s $chksum_offset -e '/1 "%02x"' /lib/firmware/$FIRMWARE)
75 xor_fw_chksum=$(xor $xor_fw_chksum $xor_fw_mac $xor_mac)
76
77 printf "%b" "\x${xor_fw_chksum:0:2}\x${xor_fw_chksum:2:2}" | \
78 dd of=/lib/firmware/$FIRMWARE conv=notrunc bs=1 seek=$chksum_offset count=2
79 }
80
81 ath10kcal_is_caldata_valid() {
82 local expected="$1"
83
84 magic=$(hexdump -v -n 2 -e '1/1 "%02x"' /lib/firmware/$FIRMWARE)
85 [[ "$magic" == "$expected" ]]
86 return $?
87 }
88
89 [ -e /lib/firmware/$FIRMWARE ] && exit 0
90
91 . /lib/functions.sh
92 . /lib/functions/system.sh
93
94 board=$(board_name)
95
96
97 case "$FIRMWARE" in
98 "ath10k/cal-pci-0000:01:00.0.bin")
99 case "$board" in
100 meraki,mr33)
101 ath10kcal_ubi_extract "ART" 36864 2116
102 ath10kcal_is_caldata_valid "4408" || ath10kcal_extract "ART" 36864 2116
103 ath10kcal_patch_mac_crc $(macaddr_add $(get_mac_binary "/sys/bus/i2c/devices/0-0050/eeprom" 102) +1)
104 ;;
105 esac
106 ;;
107 "ath10k/pre-cal-pci-0000:01:00.0.bin")
108 case "$board" in
109 openmesh,a62)
110 ath10kcal_extract "0:ART" 36864 12064
111 ;;
112 esac
113 ;;
114 "ath10k/pre-cal-ahb-a000000.wifi.bin")
115 case "$board" in
116 8dev,jalapeno |\
117 glinet,gl-b1300 |\
118 linksys,ea6350v3 |\
119 qcom,ap-dk01.1-c1)
120 ath10kcal_extract "ART" 4096 12064
121 ;;
122 asus,rt-ac58u)
123 CI_UBIPART=UBI_DEV
124 ath10kcal_ubi_extract "Factory" 4096 12064
125 ;;
126 avm,fritzbox-4040)
127 /usr/bin/fritz_cal_extract -i 1 -s 0x400 -e 0x207 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader_config")
128 ;;
129 meraki,mr33)
130 ath10kcal_ubi_extract "ART" 4096 12064
131 ath10kcal_is_caldata_valid "202f" || ath10kcal_extract "ART" 4096 12064
132 ath10kcal_patch_mac_crc $(macaddr_add $(get_mac_binary "/sys/bus/i2c/devices/0-0050/eeprom" 102) +2)
133 ;;
134 netgear,ex6100v2 |\
135 netgear,ex6150v2)
136 ath10kcal_extract "ART" 4096 12064
137 ath10kcal_patch_mac_crc $(mtd_get_mac_binary dnidata 0)
138 ;;
139 compex,wpj428 |\
140 engenius,eap1300 |\
141 openmesh,a42 |\
142 openmesh,a62)
143 ath10kcal_extract "0:ART" 4096 12064
144 ;;
145 zyxel,nbg6617 |\
146 zyxel,wre6606)
147 ath10kcal_extract "ART" 4096 12064
148 ath10kcal_patch_mac_crc $(macaddr_add $(cat /sys/class/net/eth0/address) -2)
149 ;;
150 esac
151 ;;
152 "ath10k/pre-cal-ahb-a800000.wifi.bin")
153 case "$board" in
154 8dev,jalapeno |\
155 glinet,gl-b1300 |\
156 linksys,ea6350v3 |\
157 qcom,ap-dk01.1-c1)
158 ath10kcal_extract "ART" 20480 12064
159 ;;
160 asus,rt-ac58u)
161 CI_UBIPART=UBI_DEV
162 ath10kcal_ubi_extract "Factory" 20480 12064
163 ;;
164 avm,fritzbox-4040)
165 /usr/bin/fritz_cal_extract -i 1 -s 0x400 -e 0x208 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader_config")
166 ;;
167 meraki,mr33)
168 ath10kcal_ubi_extract "ART" 20480 12064
169 ath10kcal_is_caldata_valid "202f" || ath10kcal_extract "ART" 20480 12064
170 ath10kcal_patch_mac_crc $(macaddr_add $(get_mac_binary "/sys/bus/i2c/devices/0-0050/eeprom" 102) +3)
171 ;;
172 netgear,ex6100v2 |\
173 netgear,ex6150v2)
174 ath10kcal_extract "ART" 20480 12064
175 ath10kcal_patch_mac_crc $(mtd_get_mac_binary dnidata 12)
176 ;;
177 compex,wpj428 |\
178 engenius,eap1300 |\
179 openmesh,a42 |\
180 openmesh,a62)
181 ath10kcal_extract "0:ART" 20480 12064
182 ;;
183 zyxel,nbg6617 |\
184 zyxel,wre6606)
185 ath10kcal_extract "ART" 20480 12064
186 ath10kcal_patch_mac_crc $(macaddr_add $(cat /sys/class/net/eth0/address) -1)
187 ;;
188 esac
189 ;;
190 *)
191 exit 1
192 ;;
193 esac