target/linux/ipq40xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata

   1 #!/bin/sh
   2
   3 [ -e /lib/firmware/$FIRMWARE ] && exit 0
   4
   5 . /lib/functions/caldata.sh
   6
   7 board=$(board_name)
   8
   9 case "$FIRMWARE" in
  10 "ath10k/cal-pci-0000:01:00.0.bin")
  11         case "$board" in
  12         meraki,mr33)
  13                 caldata_extract_ubi "ART" 0x9000 0x844
  14                 caldata_valid "4408" || caldata_extract "ART" 0x9000 0x844
  15                 ath10k_patch_mac $(macaddr_add $(get_mac_binary "/sys/bus/i2c/devices/0-0050/eeprom" 0x66) 1)
  16                 ;;
  17         esac
  18         ;;
  19 "ath10k/pre-cal-pci-0000:01:00.0.bin")
  20         case "$board" in
  21         asus,map-ac2200)
  22                 caldata_extract_ubi "Factory" 0x9000 0x2f20
  23                 ln -sf /lib/firmware/ath10k/pre-cal-pci-0000\:00\:00.0.bin \
  24                         /lib/firmware/ath10k/QCA9888/hw2.0/board.bin
  25                 ;;
  26         avm,fritzrepeater-3000)
  27                 /usr/bin/fritz_cal_extract -i 1 -s 0x3D000 -e 0x212 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader0") || \
  28                 /usr/bin/fritz_cal_extract -i 1 -s 0x3C800 -e 0x212 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader0") || \
  29                 /usr/bin/fritz_cal_extract -i 1 -s 0x3C000 -e 0x212 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader0") || \
  30                 /usr/bin/fritz_cal_extract -i 1 -s 0x3D000 -e 0x212 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader1") || \
  31                 /usr/bin/fritz_cal_extract -i 1 -s 0x3C800 -e 0x212 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader1") || \
  32                 /usr/bin/fritz_cal_extract -i 1 -s 0x3C000 -e 0x212 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader1")
  33                 ;;
  34         buffalo,wtr-m2133hp)
  35                 caldata_extract "ART" 0x9000 0x2f20
  36                 ath10k_patch_mac $(mtd_get_mac_binary ORGDATA 0x32)
  37                 ;;
  38         engenius,eap2200 |\
  39         openmesh,a62 |\
  40         plasmacloud,pa2200)
  41                 caldata_extract "0:ART" 0x9000 0x2f20
  42                 ;;
  43         linksys,ea8300 |\
  44         linksys,mr8300)
  45                 caldata_extract "ART" 0x9000 0x2f20
  46                 # OEM assigns 4 sequential MACs
  47                 ath10k_patch_mac $(macaddr_setbit_la $(macaddr_add "$(cat /sys/class/net/eth0/address)" 4))
  48                 ;;
  49         netgear,rbr50|\
  50         netgear,rbs50|\
  51         netgear,srr60|\
  52         netgear,srs60)
  53                 caldata_extract_mmc "0:ART" 0x9000 0x2f20
  54                 ath10k_patch_mac $(mmc_get_mac_binary ARTMTD 0x12)
  55                 ;;
  56         esac
  57         ;;
  58 "ath10k/pre-cal-ahb-a000000.wifi.bin")
  59         case "$board" in
  60         8dev,habanero-dvk |\
  61         8dev,jalapeno |\
  62         alfa-network,ap120c-ac |\
  63         cilab,meshpoint-one |\
  64         ezviz,cs-w3-wd1200g-eup |\
  65         glinet,gl-ap1300 |\
  66         glinet,gl-b1300 |\
  67         glinet,gl-s1300 |\
  68         linksys,ea6350v3 |\
  69         mobipromo,cm520-79f |\
  70         p2w,r619ac-64m |\
  71         p2w,r619ac-128m |\
  72         qcom,ap-dk01.1-c1)
  73                 caldata_extract "ART" 0x1000 0x2f20
  74                 ;;
  75         aruba,ap-303 |\
  76         aruba,ap-303h |\
  77         aruba,ap-365)
  78                 caldata_extract "ART" 0x1000 0x2f20
  79                 ath10k_patch_mac $(mtd_get_mac_binary mfginfo 0x1D)
  80                 ;;
  81         asus,map-ac2200)
  82                 caldata_extract_ubi "Factory" 0x1000 0x2f20
  83                 ;;
  84         asus,rt-ac58u)
  85                 CI_UBIPART=UBI_DEV
  86                 caldata_extract_ubi "Factory" 0x1000 0x2f20
  87                 ;;
  88         avm,fritzbox-4040)
  89                 /usr/bin/fritz_cal_extract -i 1 -s 0x400 -e 0x207 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader_config")
  90                 ;;
  91         avm,fritzbox-7530 |\
  92         avm,fritzrepeater-1200 |\
  93         avm,fritzrepeater-3000)
  94                 /usr/bin/fritz_cal_extract -i 1 -s 0x3C000 -e 0x207 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader0") || \
  95                 /usr/bin/fritz_cal_extract -i 1 -s 0x3C800 -e 0x207 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader0") || \
  96                 /usr/bin/fritz_cal_extract -i 1 -s 0x3D000 -e 0x207 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader0") || \
  97                 /usr/bin/fritz_cal_extract -i 1 -s 0x3C000 -e 0x207 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader1") || \
  98                 /usr/bin/fritz_cal_extract -i 1 -s 0x3C800 -e 0x207 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader1") || \
  99                 /usr/bin/fritz_cal_extract -i 1 -s 0x3D000 -e 0x207 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader1")
 100                 ;;
 101         buffalo,wtr-m2133hp)
 102                 caldata_extract "ART" 0x1000 0x2f20
 103                 ath10k_patch_mac $(mtd_get_mac_binary ORGDATA 0x26)
 104                 ;;
 105         cellc,rtl30vw |\
 106         compex,wpj419 |\
 107         compex,wpj428 |\
 108         edgecore,ecw5211 |\
 109         edgecore,oap100 |\
 110         engenius,eap1300 |\
 111         engenius,eap2200 |\
 112         luma,wrtq-329acn|\
 113         openmesh,a42 |\
 114         openmesh,a62 |\
 115         plasmacloud,pa1200 |\
 116         plasmacloud,pa2200 |\
 117         qxwlan,e2600ac-c1 |\
 118         qxwlan,e2600ac-c2 |\
 119         unielec,u4019-32m)
 120                 caldata_extract "0:ART" 0x1000 0x2f20
 121                 ;;
 122         devolo,magic-2-wifi-next)
 123                 caldata_extract "ART" 0x1000 0x2f20
 124                 ath10k_patch_mac $(mtd_get_mac_ascii APPSBLENV WiFiMacAddress0)
 125                 ;;
 126         dlink,dap-2610)
 127                 caldata_extract "ART" 0x1000 0x2f20
 128                 ath10k_patch_mac $(mtd_get_mac_ascii bdcfg wlanmac)
 129                 ;;
 130         engenius,emd1)
 131                 caldata_extract "0:ART" 0x1000 0x2f20
 132                 ath10k_patch_mac $(mtd_get_mac_ascii 0:APPSBLENV wlanaddr)
 133                 ;;
 134         engenius,emr3500)
 135                 caldata_extract "0:ART" 0x1000 0x2f20
 136                 ath10k_patch_mac $(mtd_get_mac_ascii 0:APPSBLENV ethaddr)
 137                 ;;
 138         engenius,ens620ext)
 139                 caldata_extract "ART" 0x1000 0x2f20
 140                 ath10k_patch_mac $(macaddr_add $(mtd_get_mac_ascii u-boot-env ethaddr) 2)
 141                 ;;
 142         linksys,ea8300 |\
 143         linksys,mr8300)
 144                 caldata_extract "ART" 0x1000 0x2f20
 145                 ath10k_patch_mac $(macaddr_add "$(cat /sys/class/net/eth0/address)" 2)
 146                 ;;
 147         meraki,mr33)
 148                 caldata_extract_ubi "ART" 0x1000 0x2f20
 149                 caldata_valid "202f" || caldata_extract "ART" 0x1000 0x2f20
 150                 ath10k_patch_mac $(macaddr_add $(get_mac_binary "/sys/bus/i2c/devices/0-0050/eeprom" 0x66) 2)
 151                 ;;
 152         mikrotik,hap-ac2 |\
 153         mikrotik,hap-ac3)
 154                 wlan_data="/sys/firmware/mikrotik/hard_config/wlan_data"
 155                 ( [ -f "$wlan_data" ] && caldata_sysfsload_from_file "$wlan_data" 0x0 0x2f20 ) || \
 156                 ( [ -d "$wlan_data" ] && caldata_sysfsload_from_file "$wlan_data/data_0" 0x0 0x2f20 )
 157                 ;;
 158         netgear,rbr50|\
 159         netgear,rbs50|\
 160         netgear,srr60|\
 161         netgear,srs60)
 162                 caldata_extract_mmc "0:ART" 0x1000 0x2f20
 163                 ath10k_patch_mac $(mmc_get_mac_binary ARTMTD 0x0)
 164                 ;;
 165         netgear,wac510)
 166                 caldata_extract "0:ART" 0x1000 0x2f20
 167                 ath10k_patch_mac $(mtd_get_mac_binary "0:MANUDATA" 0x6)
 168                 ;;
 169         teltonika,rutx10)
 170                 caldata_extract "0:ART" 0x1000 0x2f20
 171                 ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary "0:CONFIG" 0x0) 2)
 172                 ;;
 173         zyxel,nbg6617 |\
 174         zyxel,wre6606)
 175                 caldata_extract "ART" 0x1000 0x2f20
 176                 ath10k_patch_mac $(macaddr_add $(cat /sys/class/net/eth0/address) -2)
 177                 ;;
 178         esac
 179         ;;
 180 "ath10k/pre-cal-ahb-a800000.wifi.bin")
 181         case "$board" in
 182         8dev,habanero-dvk |\
 183         8dev,jalapeno |\
 184         alfa-network,ap120c-ac |\
 185         cilab,meshpoint-one |\
 186         ezviz,cs-w3-wd1200g-eup |\
 187         glinet,gl-ap1300 |\
 188         glinet,gl-b1300 |\
 189         glinet,gl-s1300 |\
 190         linksys,ea6350v3 |\
 191         mobipromo,cm520-79f |\
 192         p2w,r619ac-64m |\
 193         p2w,r619ac-128m |\
 194         qcom,ap-dk01.1-c1)
 195                 caldata_extract "ART" 0x5000 0x2f20
 196                 ;;
 197         aruba,ap-303 |\
 198         aruba,ap-303h |\
 199         aruba,ap-365)
 200                 caldata_extract "ART" 0x5000 0x2f20
 201                 ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary mfginfo 0x1D) 1)
 202                 ;;
 203         asus,map-ac2200)
 204                 caldata_extract_ubi "Factory" 0x5000 0x2f20
 205                 ;;
 206         asus,rt-ac58u)
 207                 CI_UBIPART=UBI_DEV
 208                 caldata_extract_ubi "Factory" 0x5000 0x2f20
 209                 ;;
 210         avm,fritzbox-4040)
 211                 /usr/bin/fritz_cal_extract -i 1 -s 0x400 -e 0x208 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader_config")
 212                 ;;
 213         avm,fritzbox-7530 |\
 214         avm,fritzrepeater-1200 |\
 215         avm,fritzrepeater-3000)
 216                 /usr/bin/fritz_cal_extract -i 1 -s 0x3C800 -e 0x208 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader0") || \
 217                 /usr/bin/fritz_cal_extract -i 1 -s 0x3D000 -e 0x208 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader0") || \
 218                 /usr/bin/fritz_cal_extract -i 1 -s 0x3C000 -e 0x208 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader0") || \
 219                 /usr/bin/fritz_cal_extract -i 1 -s 0x3C800 -e 0x208 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader1") || \
 220                 /usr/bin/fritz_cal_extract -i 1 -s 0x3D000 -e 0x208 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader1") || \
 221                 /usr/bin/fritz_cal_extract -i 1 -s 0x3C000 -e 0x208 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader1")
 222                 ;;
 223         buffalo,wtr-m2133hp)
 224                 caldata_extract "ART" 0x5000 0x2f20
 225                 ath10k_patch_mac $(mtd_get_mac_binary ORGDATA 0x2c)
 226                 ;;
 227         cellc,rtl30vw |\
 228         compex,wpj419 |\
 229         compex,wpj428 |\
 230         edgecore,ecw5211 |\
 231         edgecore,oap100 |\
 232         engenius,eap1300 |\
 233         engenius,eap2200 |\
 234         luma,wrtq-329acn|\
 235         openmesh,a42 |\
 236         openmesh,a62 |\
 237         plasmacloud,pa1200 |\
 238         plasmacloud,pa2200 |\
 239         qxwlan,e2600ac-c1 |\
 240         qxwlan,e2600ac-c2 |\
 241         unielec,u4019-32m)
 242                 caldata_extract "0:ART" 0x5000 0x2f20
 243                 ;;
 244         devolo,magic-2-wifi-next)
 245                 caldata_extract "ART" 0x5000 0x2f20
 246                 ath10k_patch_mac $(mtd_get_mac_ascii APPSBLENV WiFiMacAddress1)
 247                 ;;
 248         dlink,dap-2610)
 249                 caldata_extract "ART" 0x5000 0x2f20
 250                 ath10k_patch_mac $(mtd_get_mac_ascii bdcfg wlanmac_a)
 251                 ;;
 252         engenius,emd1)
 253                 caldata_extract "0:ART" 0x5000 0x2f20
 254                 ath10k_patch_mac $(macaddr_add $(mtd_get_mac_ascii 0:APPSBLENV wlanaddr) 1)
 255                 ;;
 256         engenius,emr3500)
 257                 caldata_extract "0:ART" 0x5000 0x2f20
 258                 ath10k_patch_mac $(macaddr_add $(mtd_get_mac_ascii 0:APPSBLENV ethaddr) 1)
 259                 ;;
 260         engenius,ens620ext)
 261                 caldata_extract "ART" 0x5000 0x2f20
 262                 ath10k_patch_mac $(macaddr_add $(mtd_get_mac_ascii u-boot-env ethaddr) 3)
 263                 ;;
 264         linksys,ea8300 |\
 265         linksys,mr8300)
 266                 caldata_extract "ART" 0x5000 0x2f20
 267                 ath10k_patch_mac $(macaddr_add "$(cat /sys/class/net/eth0/address)" 3)
 268                 ;;
 269         meraki,mr33)
 270                 caldata_extract_ubi "ART" 0x5000 0x2f20
 271                 caldata_valid "202f" || caldata_extract "ART" 0x5000 0x2f20
 272                 ath10k_patch_mac $(macaddr_add $(get_mac_binary "/sys/bus/i2c/devices/0-0050/eeprom" 0x66) 3)
 273                 ;;
 274         mikrotik,hap-ac2 |\
 275         mikrotik,hap-ac3 |\
 276         mikrotik,sxtsq-5-ac)
 277                 wlan_data="/sys/firmware/mikrotik/hard_config/wlan_data"
 278                 ( [ -f "$wlan_data" ] && caldata_sysfsload_from_file "$wlan_data" 0x8000 0x2f20 ) || \
 279                 ( [ -d "$wlan_data" ] && caldata_sysfsload_from_file "$wlan_data/data_2" 0x0 0x2f20 )
 280                 ;;
 281         netgear,rbr50|\
 282         netgear,rbs50|\
 283         netgear,srr60|\
 284         netgear,srs60)
 285                 caldata_extract_mmc "0:ART" 0x5000 0x2f20
 286                 ath10k_patch_mac $(mmc_get_mac_binary ARTMTD 0xc)
 287                 ;;
 288         netgear,wac510)
 289                 caldata_extract "0:ART" 0x5000 0x2f20
 290                 ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary "0:MANUDATA" 0x6) 16)
 291                 ;;
 292         teltonika,rutx10)
 293                 caldata_extract "0:ART" 0x5000 0x2f20
 294                 ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary "0:CONFIG" 0x0) 3)
 295                 ;;
 296         zyxel,nbg6617 |\
 297         zyxel,wre6606)
 298                 caldata_extract "ART" 0x5000 0x2f20
 299                 ath10k_patch_mac $(macaddr_add $(cat /sys/class/net/eth0/address) -1)
 300                 ;;
 301         esac
 302         ;;
 303 *)
 304         exit 1
 305         ;;
 306 esac