target/linux/ipq40xx/base-files/lib/upgrade/platform.sh

   1 PART_NAME=firmware
   2 REQUIRE_IMAGE_METADATA=1
   3
   4 RAMFS_COPY_BIN='fw_printenv fw_setenv'
   5 RAMFS_COPY_DATA='/etc/fw_env.config /var/lock/fw_printenv.lock'
   6
   7 platform_check_image() {
   8         case "$(board_name)" in
   9         asus,rt-ac58u)
  10                 CI_UBIPART="UBI_DEV"
  11                 local ubidev=$(nand_find_ubi $CI_UBIPART)
  12                 local asus_root=$(nand_find_volume $ubidev jffs2)
  13
  14                 [ -n "$asus_root" ] || return 0
  15
  16                 cat << EOF
  17 jffs2 partition is still present.
  18 There's probably no space left
  19 to install the filesystem.
  20
  21 You need to delete the jffs2 partition first:
  22 # ubirmvol /dev/ubi0 --name=jffs2
  23
  24 Once this is done. Retry.
  25 EOF
  26                 return 1
  27                 ;;
  28         esac
  29         return 0;
  30 }
  31
  32 zyxel_do_upgrade() {
  33         local tar_file="$1"
  34
  35         local board_dir=$(tar tf $tar_file | grep -m 1 '^sysupgrade-.*/$')
  36         board_dir=${board_dir%/}
  37
  38         tar Oxf $tar_file ${board_dir}/kernel | mtd write - kernel
  39
  40         if [ "$UPGRADE_OPT_SAVE_CONFIG" -eq 1 ]; then
  41                 tar Oxf $tar_file ${board_dir}/root | mtd -j "$CONF_TAR" write - rootfs
  42         else
  43                 tar Oxf $tar_file ${board_dir}/root | mtd write - rootfs
  44         fi
  45 }
  46
  47 platform_do_upgrade() {
  48         case "$(board_name)" in
  49         8dev,jalapeno |\
  50         alfa-network,ap120c-ac |\
  51         avm,fritzbox-7530 |\
  52         avm,fritzrepeater-3000 |\
  53         qxwlan,e2600ac-c2)
  54                 nand_do_upgrade "$ARGV"
  55                 ;;
  56         asus,map-ac2200)
  57                 CI_KERNPART="linux"
  58                 nand_do_upgrade "$1"
  59                 ;;
  60         asus,rt-ac58u)
  61                 CI_UBIPART="UBI_DEV"
  62                 CI_KERNPART="linux"
  63                 nand_do_upgrade "$1"
  64                 ;;
  65         linksys,ea6350v3 |\
  66         linksys,ea8300)
  67                 platform_do_upgrade_linksys "$ARGV"
  68                 ;;
  69         meraki,mr33)
  70                 CI_KERNPART="part.safe"
  71                 nand_do_upgrade "$1"
  72                 ;;
  73         openmesh,a42 |\
  74         openmesh,a62)
  75                 PART_NAME="inactive"
  76                 platform_do_upgrade_openmesh "$ARGV"
  77                 ;;
  78         zyxel,nbg6617)
  79                 zyxel_do_upgrade "$1"
  80                 ;;
  81         *)
  82                 default_do_upgrade "$ARGV"
  83                 ;;
  84         esac
  85 }
  86
  87 platform_nand_pre_upgrade() {
  88         case "$(board_name)" in
  89         alfa-network,ap120c-ac)
  90                 part="$(awk -F 'ubi.mtd=' '{printf $2}' /proc/cmdline | sed -e 's/ .*$//')"
  91                 if [ "$part" = "rootfs1" ]; then
  92                         fw_setenv active 2 || exit 1
  93                         CI_UBIPART="rootfs2"
  94                 else
  95                         fw_setenv active 1 || exit 1
  96                         CI_UBIPART="rootfs1"
  97                 fi
  98                 ;;
  99         asus,rt-ac58u)
 100                 CI_UBIPART="UBI_DEV"
 101                 CI_KERNPART="linux"
 102                 ;;
 103         meraki,mr33)
 104                 CI_KERNPART="part.safe"
 105                 ;;
 106         esac
 107 }