target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4018-fritz4040.dts

   1 /* Copyright (c) 2015, The Linux Foundation. All rights reserved.
   2  *
   3  * Permission to use, copy, modify, and/or distribute this software for any
   4  * purpose with or without fee is hereby granted, provided that the above
   5  * copyright notice and this permission notice appear in all copies.
   6  *
   7  * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
   8  * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
   9  * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
  10  * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
  11  * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
  12  * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
  13  * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
  14  *
  15  */
  16
  17 #include "qcom-ipq4019.dtsi"
  18 #include "qcom-ipq4019-bus.dtsi"
  19 #include <dt-bindings/gpio/gpio.h>
  20 #include <dt-bindings/input/input.h>
  21 #include <dt-bindings/soc/qcom,tcsr.h>
  22
  23 / {
  24         model = "AVM FRITZ!Box 4040";
  25         compatible = "avm,fritzbox-4040", "qcom,ipq4019";
  26
  27         aliases {
  28                 led-boot = &power;
  29                 led-failsafe = &flash;
  30                 led-running = &power;
  31                 led-upgrade = &flash;
  32         };
  33
  34         soc {
  35                 mdio@90000 {
  36                         status = "okay";
  37                 };
  38
  39                 ess-psgmii@98000 {
  40                         status = "okay";
  41                 };
  42
  43                 tcsr@1949000 {
  44                         compatible = "qcom,tcsr";
  45                         reg = <0x1949000 0x100>;
  46                         qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
  47                 };
  48
  49                 tcsr@194b000 {
  50                         compatible = "qcom,tcsr";
  51                         reg = <0x194b000 0x100>;
  52                         qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>;
  53                 };
  54
  55                 ess_tcsr@1953000 {
  56                         compatible = "qcom,tcsr";
  57                         reg = <0x1953000 0x1000>;
  58                         qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
  59                 };
  60
  61                 tcsr@1957000 {
  62                         compatible = "qcom,tcsr";
  63                         reg = <0x1957000 0x100>;
  64                         qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
  65                 };
  66
  67                 usb2@60f8800 {
  68                         status = "okay";
  69                 };
  70
  71                 serial@78af000 {
  72                         pinctrl-0 = <&serial_pins>;
  73                         pinctrl-names = "default";
  74                         status = "okay";
  75                 };
  76
  77                 usb3@8af8800 {
  78                         status = "okay";
  79                 };
  80
  81                 crypto@8e3a000 {
  82                         status = "okay";
  83                 };
  84
  85                 wifi@a000000 {
  86                         status = "okay";
  87                 };
  88
  89                 wifi@a800000 {
  90                         status = "okay";
  91                 };
  92
  93                 watchdog@b017000 {
  94                         status = "okay";
  95                 };
  96
  97                 qca8075: ess-switch@c000000 {
  98                         status = "okay";
  99
 100                         #gpio-cells = <2>;
 101                         gpio-controller;
 102
 103                         enable-usb-power {
 104                                 gpio-hog;
 105                                 line-name = "enable USB3 power";
 106                                 gpios = <7 GPIO_ACTIVE_HIGH>;
 107                                 output-high;
 108                         };
 109                 };
 110
 111                 edma@c080000 {
 112                         status = "okay";
 113                 };
 114         };
 115
 116         gpio-keys {
 117                 compatible = "gpio-keys";
 118
 119                 wlan {
 120                         label = "wlan";
 121                         gpios = <&tlmm 58 GPIO_ACTIVE_LOW>;
 122                         linux,code = <KEY_RFKILL>;
 123                 };
 124
 125                 wps {
 126                         label = "wps";
 127                         gpios = <&tlmm 63 GPIO_ACTIVE_LOW>;
 128                         linux,code = <KEY_WPS_BUTTON>;
 129                 };
 130         };
 131
 132         gpio-leds {
 133                 compatible = "gpio-leds";
 134
 135                 wlan {
 136                         label = "fritz4040:green:wlan";
 137                         gpios = <&qca8075 1 GPIO_ACTIVE_HIGH>;
 138                 };
 139
 140                 panic: info_red {
 141                         label = "fritz4040:red:info";
 142                         gpios = <&qca8075 3 GPIO_ACTIVE_HIGH>;
 143                         panic-indicator;
 144                 };
 145
 146                 wan {
 147                         label = "fritz4040:green:wan";
 148                         gpios = <&qca8075 5 GPIO_ACTIVE_HIGH>;
 149                 };
 150
 151                 power: power {
 152                         label = "fritz4040:green:power";
 153                         gpios = <&qca8075 11 GPIO_ACTIVE_HIGH>;
 154                 };
 155
 156                 lan {
 157                         label = "fritz4040:green:lan";
 158                         gpios = <&qca8075 13 GPIO_ACTIVE_HIGH>;
 159                 };
 160
 161                 flash: info_amber {
 162                         label = "fritz4040:amber:info";
 163                         gpios = <&qca8075 15 GPIO_ACTIVE_HIGH>;
 164                 };
 165         };
 166 };
 167
 168 &tlmm {
 169         serial_pins: serial_pinmux {
 170                 mux {
 171                         pins = "gpio60", "gpio61";
 172                         function = "blsp_uart0";
 173                         bias-disable;
 174                 };
 175         };
 176
 177         spi_0_pins: spi_0_pinmux {
 178                 mux {
 179                         function = "blsp_spi0";
 180                         pins = "gpio55", "gpio56", "gpio57";
 181                         drive-strength = <12>;
 182                         bias-disable;
 183                 };
 184
 185                 mux_cs {
 186                         function = "gpio";
 187                         pins = "gpio54";
 188                         drive-strength = <2>;
 189                         bias-disable;
 190                         output-high;
 191                 };
 192         };
 193 };
 194
 195 &cryptobam {
 196         status = "okay";
 197 };
 198
 199 &blsp_dma {
 200         status = "okay";
 201 };
 202
 203 &spi_0 { /* BLSP1 QUP1 */
 204         pinctrl-0 = <&spi_0_pins>;
 205         pinctrl-names = "default";
 206         status = "okay";
 207         cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>;
 208
 209         mx25l25635f@0 {
 210                 compatible = "jedec,spi-nor";
 211                 #address-cells = <1>;
 212                 #size-cells = <0>;
 213                 reg = <0>;
 214                 spi-max-frequency = <24000000>;
 215                 status = "okay";
 216                 m25p,fast-read;
 217
 218                 partitions {
 219                         compatible = "fixed-partitions";
 220                         #address-cells = <1>;
 221                         #size-cells = <1>;
 222
 223                         partition0@0 {
 224                                 label = "SBL1";
 225                                 reg = <0x00000000 0x00040000>;
 226                                 read-only;
 227                         };
 228                         partition1@40000 {
 229                                 label = "MIBIB";
 230                                 reg = <0x00040000 0x00020000>;
 231                                 read-only;
 232                         };
 233                         partition2@60000 {
 234                                 label = "QSEE";
 235                                 reg = <0x00060000 0x00060000>;
 236                                 read-only;
 237                         };
 238                         partition3@c0000 {
 239                                 label = "CDT";
 240                                 reg = <0x000c0000 0x00010000>;
 241                                 read-only;
 242                         };
 243                         partition4@d0000 {
 244                                 label = "DDRPARAMS";
 245                                 reg = <0x000d0000 0x00010000>;
 246                                 read-only;
 247                         };
 248                         partition5@e0000 {
 249                                 label = "APPSBLENV"; /* uboot env - empty */
 250                                 reg = <0x000e0000 0x00010000>;
 251                                 read-only;
 252                         };
 253                         partition6@f0000 {
 254                                 label = "urlader"; /* APPSBL */
 255                                 reg = <0x000f0000 0x0002dc000>;
 256                                 read-only;
 257                         };
 258                         partition7@11dc00 {
 259                                 /* make a backup of this partition! */
 260                                 label = "urlader_config";
 261                                 reg = <0x0011dc00 0x00002400>;
 262                                 read-only;
 263                         };
 264                         partition8@120000 {
 265                                 label = "tffs1";
 266                                 reg = <0x00120000 0x00080000>;
 267                                 read-only;
 268                         };
 269                         partition9@1a0000 {
 270                                 label = "tffs2";
 271                                 reg = <0x001a0000 0x00080000>;
 272                                 read-only;
 273                         };
 274                         partition10@220000 {
 275                                 label = "uboot";
 276                                 reg = <0x00220000 0x00080000>;
 277                                 read-only;
 278                         };
 279                         partition11@2A0000 {
 280                                 label = "firmware";
 281                                 reg = <0x002a0000 0x01c60000>;
 282                         };
 283                         partition12@1f00000 {
 284                                 label = "jffs2";
 285                                 reg = <0x01f00000 0x00100000>;
 286                         };
 287                 };
 288         };
 289 };
 290
 291 &usb3_ss_phy {
 292         status = "okay";
 293 };
 294
 295 &usb3_hs_phy {
 296         status = "okay";
 297 };
 298
 299 &usb2_hs_phy {
 300         status = "okay";
 301 };