target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4018-rt-ac58u.dts

   1 /* Copyright (c) 2015, The Linux Foundation. All rights reserved.
   2  *
   3  * Permission to use, copy, modify, and/or distribute this software for any
   4  * purpose with or without fee is hereby granted, provided that the above
   5  * copyright notice and this permission notice appear in all copies.
   6  *
   7  * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
   8  * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
   9  * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
  10  * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
  11  * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
  12  * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
  13  * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
  14  *
  15  */
  16
  17 #include "qcom-ipq4019.dtsi"
  18 #include "qcom-ipq4019-bus.dtsi"
  19 #include <dt-bindings/gpio/gpio.h>
  20 #include <dt-bindings/input/input.h>
  21 #include <dt-bindings/soc/qcom,tcsr.h>
  22
  23 / {
  24         model = "ASUS RT-AC58U";
  25         compatible = "asus,rt-ac58u", "qcom,ipq4019";
  26
  27         memory {
  28                 device_type = "memory";
  29                 reg = <0x80000000 0x8000000>;
  30         };
  31
  32         aliases {
  33                 led-boot = &power;
  34                 led-failsafe = &power;
  35                 led-running = &power;
  36                 led-upgrade = &power;
  37         };
  38
  39         soc {
  40                 mdio@90000 {
  41                         status = "okay";
  42                 };
  43
  44                 ess-psgmii@98000 {
  45                         status = "okay";
  46                 };
  47
  48                 tcsr@1949000 {
  49                         compatible = "qcom,tcsr";
  50                         reg = <0x1949000 0x100>;
  51                         qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
  52                 };
  53
  54                 tcsr@194b000 {
  55                         compatible = "qcom,tcsr";
  56                         reg = <0x194b000 0x100>;
  57                         qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>;
  58                 };
  59
  60                 ess_tcsr@1953000 {
  61                         compatible = "qcom,tcsr";
  62                         reg = <0x1953000 0x1000>;
  63                         qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
  64                 };
  65
  66                 tcsr@1957000 {
  67                         compatible = "qcom,tcsr";
  68                         reg = <0x1957000 0x100>;
  69                         qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
  70                 };
  71
  72                 usb2@60f8800 {
  73                         status = "okay";
  74                 };
  75
  76                 serial@78af000 {
  77                         pinctrl-0 = <&serial_pins>;
  78                         pinctrl-names = "default";
  79                         status = "okay";
  80                 };
  81
  82                 usb3@8af8800 {
  83                         status = "okay";
  84                 };
  85
  86                 crypto@8e3a000 {
  87                         status = "okay";
  88                 };
  89
  90                 wifi@a000000 {
  91                         status = "okay";
  92                         qcom,ath10k-calibration-variant = "RT-AC58U";
  93                 };
  94
  95                 wifi@a800000 {
  96                         status = "okay";
  97                         qcom,ath10k-calibration-variant = "RT-AC58U";
  98                 };
  99
 100                 watchdog@b017000 {
 101                         status = "okay";
 102                 };
 103
 104                 ess-switch@c000000 {
 105                         status = "okay";
 106                 };
 107
 108                 edma@c080000 {
 109                         status = "okay";
 110                 };
 111         };
 112
 113         gpio-keys {
 114                 compatible = "gpio-keys";
 115
 116                 reset {
 117                         label = "reset";
 118                         gpios = <&tlmm 4 GPIO_ACTIVE_LOW>;
 119                         linux,code = <KEY_RESTART>;
 120                 };
 121
 122                 wps {
 123                         label = "wps";
 124                         gpios = <&tlmm 63 GPIO_ACTIVE_LOW>;
 125                         linux,code = <KEY_WPS_BUTTON>;
 126                 };
 127         };
 128
 129         gpio-leds {
 130                 compatible = "gpio-leds";
 131
 132                 power: status {
 133                         label = "rt-ac58u:blue:status";
 134                         gpios = <&tlmm 3 GPIO_ACTIVE_HIGH>;
 135                 };
 136
 137                 wan {
 138                         label = "rt-ac58u:blue:wan";
 139                         gpios = <&tlmm 1 GPIO_ACTIVE_HIGH>;
 140                 };
 141
 142                 wlan2G {
 143                         label = "rt-ac58u:blue:wlan2G";
 144                         gpios = <&tlmm 58 GPIO_ACTIVE_HIGH>;
 145                 };
 146
 147                 wan5G {
 148                         label = "rt-ac58u:blue:wlan5G";
 149                         gpios = <&tlmm 5 GPIO_ACTIVE_HIGH>;
 150                 };
 151
 152                 usb {
 153                         label = "rt-ac58u:blue:usb";
 154                         gpios = <&tlmm 0 GPIO_ACTIVE_HIGH>;
 155                 };
 156
 157                 lan {
 158                         label = "rt-ac58u:blue:lan";
 159                         gpios = <&tlmm 2 GPIO_ACTIVE_HIGH>;
 160                 };
 161         };
 162 };
 163
 164 &cryptobam {
 165         status = "okay";
 166 };
 167
 168 &blsp_dma {
 169         status = "okay";
 170 };
 171
 172 &tlmm {
 173         serial_pins: serial_pinmux {
 174                 mux {
 175                         pins = "gpio60", "gpio61";
 176                         function = "blsp_uart0";
 177                         bias-disable;
 178                 };
 179         };
 180
 181         spi_0_pins: spi_0_pinmux {
 182                 mux {
 183                         function = "blsp_spi0";
 184                         pins = "gpio55", "gpio56", "gpio57";
 185                         drive-strength = <12>;
 186                         bias-disable;
 187                 };
 188
 189                 mux_cs {
 190                         function = "gpio";
 191                         pins = "gpio54", "gpio59";
 192                         drive-strength = <2>;
 193                         bias-disable;
 194                         output-high;
 195                 };
 196         };
 197 };
 198
 199 &spi_0 { /* BLSP1 QUP1 */
 200         pinctrl-0 = <&spi_0_pins>;
 201         pinctrl-names = "default";
 202         status = "okay";
 203         cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>,
 204                    <&tlmm 59 GPIO_ACTIVE_HIGH>;
 205
 206         m25p80@0 {
 207                 #address-cells = <1>;
 208                 #size-cells = <0>;
 209                 /*
 210                  * U-boot looks for "n25q128a11" node,
 211                  * if we don't have it, it will spit out the following warning:
 212                  * "ipq: fdt fixup unable to find compatible node".
 213                  */
 214                 compatible = "jedec,spi-nor";
 215                 reg = <0>;
 216                 linux,modalias = "m25p80", "mx25l1606e", "n25q128a11";
 217                 spi-max-frequency = <24000000>;
 218
 219                 partitions {
 220                         compatible = "fixed-partitions";
 221                         #address-cells = <1>;
 222                         #size-cells = <1>;
 223
 224                         partition0@0 {
 225                                 label = "SBL1";
 226                                 reg = <0x00000000 0x00040000>;
 227                                 read-only;
 228                         };
 229                         partition1@40000 {
 230                                 label = "MIBIB";
 231                                 reg = <0x00040000 0x00020000>;
 232                                 read-only;
 233                         };
 234                         partition2@60000 {
 235                                 label = "QSEE";
 236                                 reg = <0x00060000 0x00060000>;
 237                                 read-only;
 238                         };
 239                         partition3@c0000 {
 240                                 label = "CDT";
 241                                 reg = <0x000c0000 0x00010000>;
 242                                 read-only;
 243                         };
 244                         partition4@d0000 {
 245                                 label = "DDRPARAMS";
 246                                 reg = <0x000d0000 0x00010000>;
 247                                 read-only;
 248                         };
 249                         partition5@e0000 {
 250                                 label = "APPSBLENV"; /* uboot env*/
 251                                 reg = <0x000e0000 0x00010000>;
 252                                 read-only;
 253                         };
 254                         partition5@f0000 {
 255                                 label = "APPSBL"; /* uboot */
 256                                 reg = <0x000f0000 0x00080000>;
 257                                 read-only;
 258                         };
 259                         partition5@170000 {
 260                                 label = "ART";
 261                                 reg = <0x00170000 0x00010000>;
 262                                 read-only;
 263                         };
 264                         /* 0x00180000 - 0x00200000 unused */
 265                 };
 266         };
 267
 268         mt29f@1 {
 269                 #address-cells = <1>;
 270                 #size-cells = <0>;
 271                 compatible = "spinand,mt29f";
 272                 reg = <1>;
 273                 spi-max-frequency = <24000000>;
 274
 275                 partitions {
 276                         compatible = "fixed-partitions";
 277                         #address-cells = <1>;
 278                         #size-cells = <1>;
 279
 280                         partition0@0 {
 281                                 label = "ubi";
 282                                 reg = <0x00000000 0x08000000>;
 283                         };
 284                 };
 285         };
 286 };
 287
 288 &usb3_ss_phy {
 289         status = "okay";
 290 };
 291
 292 &usb3_hs_phy {
 293         status = "okay";
 294 };
 295
 296 &usb2_hs_phy {
 297         status = "okay";
 298 };