ipq40xx: Add files for 4.19
[openwrt/openwrt.git] / target / linux / ipq40xx / files-4.19 / arch / arm / boot / dts / qcom-ipq4018-wre6606.dts
1 /* Copyright (c) 2015, The Linux Foundation. All rights reserved.
2 * Copyright (c) 2018, David Bauer <mail@david-bauer.net>
3 *
4 * Permission to use, copy, modify, and/or distribute this software for any
5 * purpose with or without fee is hereby granted, provided that the above
6 * copyright notice and this permission notice appear in all copies.
7 *
8 * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
9 * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
10 * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
11 * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
12 * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
13 * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
14 * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
15 *
16 */
17
18 #include "qcom-ipq4019.dtsi"
19 #include <dt-bindings/gpio/gpio.h>
20 #include <dt-bindings/input/input.h>
21 #include <dt-bindings/soc/qcom,tcsr.h>
22
23 / {
24 model = "ZyXEL WRE6606";
25 compatible = "zyxel,wre6606", "qcom,ipq4019";
26
27 aliases {
28 led-boot = &power;
29 led-failsafe = &power;
30 led-running = &power;
31 led-upgrade = &power;
32 };
33
34 chosen {
35 bootargs-append = " mtdparts=";
36 };
37
38 soc {
39 mdio@90000 {
40 status = "okay";
41 };
42
43 ess-psgmii@98000 {
44 status = "okay";
45 };
46
47 tcsr@1949000 {
48 compatible = "qcom,tcsr";
49 reg = <0x1949000 0x100>;
50 qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
51 };
52
53 ess_tcsr@1953000 {
54 compatible = "qcom,tcsr";
55 reg = <0x1953000 0x1000>;
56 qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
57 };
58
59 tcsr@1957000 {
60 compatible = "qcom,tcsr";
61 reg = <0x1957000 0x100>;
62 qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
63 };
64
65 crypto@8e3a000 {
66 status = "okay";
67 };
68
69 watchdog@b017000 {
70 status = "okay";
71 };
72
73 ess-switch@c000000 {
74 status = "okay";
75 };
76
77 edma@c080000 {
78 status = "okay";
79 qcom,num_gmac = <1>;
80 };
81 };
82
83 gpio-leds {
84 compatible = "gpio-leds";
85
86 wps {
87 label = "wre6606:green:wps";
88 gpios = <&tlmm 1 GPIO_ACTIVE_HIGH>;
89 };
90
91 wlan5g_green {
92 label = "wre6606:green:wlan5g";
93 gpios = <&tlmm 3 GPIO_ACTIVE_HIGH>;
94 };
95
96 power: power {
97 label = "wre6606:green:power";
98 gpios = <&tlmm 4 GPIO_ACTIVE_HIGH>;
99 };
100
101 wlan5g_red {
102 label = "wre6606:red:wlan5g";
103 gpios = <&tlmm 5 GPIO_ACTIVE_HIGH>;
104 };
105
106 wlan2g_red {
107 label = "wre6606:red:wlan2g";
108 gpios = <&tlmm 58 GPIO_ACTIVE_HIGH>;
109 };
110
111 wlan2g_green {
112 label = "wre6606:green:wlan2g";
113 gpios = <&tlmm 59 GPIO_ACTIVE_HIGH>;
114 };
115 };
116
117 gpio-keys {
118 compatible = "gpio-keys";
119
120 wps {
121 label = "wps";
122 gpios = <&tlmm 63 GPIO_ACTIVE_LOW>;
123 linux,code = <KEY_WPS_BUTTON>;
124 };
125 };
126 };
127
128 &tlmm {
129 serial_pins: serial_pinmux {
130 mux {
131 pins = "gpio60", "gpio61";
132 function = "blsp_uart0";
133 bias-disable;
134 };
135 };
136
137 spi_0_pins: spi_0_pinmux {
138 pin {
139 function = "blsp_spi0";
140 pins = "gpio55", "gpio56", "gpio57";
141 drive-strength = <12>;
142 bias-disable;
143 };
144 pin_cs {
145 function = "gpio";
146 pins = "gpio54";
147 drive-strength = <2>;
148 bias-disable;
149 output-high;
150 };
151 };
152 };
153
154 &blsp_dma {
155 status = "okay";
156 };
157
158 &blsp1_spi1 {
159 pinctrl-0 = <&spi_0_pins>;
160 pinctrl-names = "default";
161 status = "okay";
162 cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>;
163
164 mx25l12805d@0 {
165 compatible = "jedec,spi-nor";
166 reg = <0>;
167 spi-max-frequency = <24000000>;
168
169 partitions {
170 compatible = "fixed-partitions";
171 #address-cells = <1>;
172 #size-cells = <1>;
173
174 partition0@0 {
175 label = "SBL1";
176 reg = <0x00000000 0x00040000>;
177 read-only;
178 };
179
180 partition1@40000 {
181 label = "MIBIB";
182 reg = <0x00040000 0x00020000>;
183 read-only;
184 };
185
186 partition2@60000 {
187 label = "QSEE";
188 reg = <0x00060000 0x00060000>;
189 read-only;
190 };
191
192 partition3@c0000 {
193 label = "CDT";
194 reg = <0x000c0000 0x00010000>;
195 read-only;
196 };
197
198 partition4@d0000 {
199 label = "DDRPARAMS";
200 reg = <0x000d0000 0x00010000>;
201 read-only;
202 };
203
204 partition5@E0000 {
205 label = "APPSBLENV";
206 reg = <0x000e0000 0x00010000>;
207 read-only;
208 };
209
210 partition6@F0000 {
211 label = "APPSBL";
212 reg = <0x000f0000 0x00080000>;
213 read-only;
214 };
215
216 partition7@170000 {
217 label = "ART";
218 reg = <0x00170000 0x00010000>;
219 read-only;
220 };
221
222 partition8@180000 {
223 compatible = "denx,fit";
224 label = "firmware";
225 reg = <0x00180000 0x00ce0000>;
226 };
227
228 partition9@e60000 {
229 label = "manufacture";
230 reg = <0x00e60000 0x00050000>;
231 read-only;
232 };
233
234 partition10@eb0000 {
235 label = "storage";
236 reg = <0x00eb0000 0x00150000>;
237 read-only;
238 };
239 };
240 };
241 };
242
243 &blsp1_uart1 {
244 pinctrl-0 = <&serial_pins>;
245 pinctrl-names = "default";
246 status = "okay";
247 };
248
249 &cryptobam {
250 status = "okay";
251 };
252
253 &wifi0 {
254 status = "okay";
255 qcom,ath10k-calibration-variant = "ZyXEL-WRE6606";
256 };
257
258 &wifi1 {
259 status = "okay";
260 qcom,ath10k-calibration-variant = "ZyXEL-WRE6606";
261 };