target/linux/ipq40xx/files-5.4/arch/arm/boot/dts/qcom-ipq4029-aruba-glenmorangie.dtsi

   1 // SPDX-License-Identifier: GPL-2.0 OR MIT
   2
   3 #include "qcom-ipq4019.dtsi"
   4 #include <dt-bindings/gpio/gpio.h>
   5 #include <dt-bindings/input/input.h>
   6 #include <dt-bindings/soc/qcom,tcsr.h>
   7
   8 / {
   9         memory {
  10                 device_type = "memory";
  11                 reg = <0x80000000 0x10000000>;
  12         };
  13
  14         soc {
  15                 rng@22000 {
  16                         status = "okay";
  17                 };
  18
  19                 mdio@90000 {
  20                         status = "okay";
  21                         pinctrl-0 = <&mdio_pins>;
  22                         pinctrl-names = "default";
  23
  24                         /delete-node/ ethernet-phy@0;
  25                         /delete-node/ ethernet-phy@2;
  26                         /delete-node/ ethernet-phy@3;
  27                         /delete-node/ ethernet-phy@4;
  28
  29                         ethernet-phy@5 {
  30                                 reg = <0x5>;
  31                         };
  32                 };
  33
  34                 counter@4a1000 {
  35                         compatible = "qcom,qca-gcnt";
  36                         reg = <0x4a1000 0x4>;
  37                 };
  38
  39                 ess_tcsr@1953000 {
  40                         compatible = "qcom,tcsr";
  41                         reg = <0x1953000 0x1000>;
  42                         qcom,ess-interface-select = <TCSR_ESS_PSGMII_RGMII5>;
  43                 };
  44
  45                 tcsr@1949000 {
  46                         compatible = "qcom,tcsr";
  47                         reg = <0x1949000 0x100>;
  48                         qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
  49                 };
  50
  51                 tcsr@1957000 {
  52                         compatible = "qcom,tcsr";
  53                         reg = <0x1957000 0x100>;
  54                         qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
  55                 };
  56
  57                 crypto@8e3a000 {
  58                         status = "okay";
  59                 };
  60
  61                 watchdog@b017000 {
  62                         status = "okay";
  63                 };
  64
  65                 ess-switch@c000000 {
  66                         switch_mac_mode = <0x3>; /* mac mode for RGMII RMII */
  67                         switch_lan_bmp = <0x0>; /* lan port bitmap */
  68                         switch_wan_bmp = <0x10>; /* wan port bitmap */
  69                 };
  70
  71                 edma@c080000 {
  72                         qcom,single-phy;
  73                         qcom,num_gmac = <1>;
  74                         phy-mode = "rgmii-id";
  75                         status = "okay";
  76                 };
  77
  78                 i2c_0: i2c@78b7000 {
  79                         pinctrl-0 = <&i2c_0_pins>;
  80                         pinctrl-names = "default";
  81                         status = "okay";
  82
  83                         tpm@29 {
  84                                 /* No Driver */
  85                                 compatible = "atmel,at97sc3203";
  86                                 reg = <0x29>;
  87                                 read-only;
  88                         };
  89                 };
  90         };
  91
  92         keys {
  93                 compatible = "gpio-keys";
  94
  95                 reset {
  96                         label = "Reset button";
  97                         gpios = <&tlmm 50 GPIO_ACTIVE_LOW>;
  98                         linux,code = <KEY_RESTART>;
  99                 };
 100         };
 101 };
 102
 103 &blsp_dma {
 104         status = "okay";
 105 };
 106
 107 &blsp1_uart1 {
 108         /* Texas Instruments CC2540T BLE radio */
 109         pinctrl-0 = <&serial_0_pins>;
 110         pinctrl-names = "default";
 111         status = "okay";
 112 };
 113
 114 &blsp1_uart2 {
 115         pinctrl-0 = <&serial_1_pins>;
 116         pinctrl-names = "default";
 117         status = "okay";
 118 };
 119
 120 &cryptobam {
 121         status = "okay";
 122 };
 123
 124 &gmac0 {
 125         qcom,phy_mdio_addr = <5>;
 126         qcom,poll_required = <1>;
 127         vlan_tag = <0 0x20>;
 128 };
 129
 130 &qpic_bam {
 131         status = "okay";
 132 };
 133
 134 &tlmm {
 135         mdio_pins: mdio_pinmux {
 136                 mux_1 {
 137                         pins = "gpio6";
 138                         function = "mdio";
 139                         bias-pull-up;
 140                 };
 141                 mux_2 {
 142                         pins = "gpio7";
 143                         function = "mdc";
 144                         bias-pull-up;
 145                 };
 146         };
 147
 148         nand_pins: nand_pins {
 149                 pullups {
 150                         pins = "gpio53", "gpio58", "gpio59";
 151                         function = "qpic";
 152                         bias-pull-up;
 153                 };
 154
 155                 pulldowns {
 156                         pins = "gpio54", "gpio55", "gpio56",
 157                                 "gpio57", "gpio60", "gpio61",
 158                                 "gpio62", "gpio63", "gpio64",
 159                                 "gpio65", "gpio66", "gpio67",
 160                                 "gpio68", "gpio69";
 161                         function = "qpic";
 162                         bias-pull-down;
 163                 };
 164         };
 165
 166         spi_0_pins: spi_0_pinmux {
 167                 pin {
 168                         function = "blsp_spi0";
 169                         pins = "gpio13", "gpio14", "gpio15";
 170                         drive-strength = <12>;
 171                         bias-disable;
 172                 };
 173                 pin_cs {
 174                         function = "gpio";
 175                         pins = "gpio12";
 176                         drive-strength = <2>;
 177                         bias-disable;
 178                         output-high;
 179                 };
 180         };
 181
 182         i2c_0_pins: i2c_0_pinmux {
 183                 mux {
 184                         pins = "gpio10", "gpio11";
 185                         function = "blsp_i2c0";
 186                         drive-strength = <4>;
 187                         bias-disable;
 188                 };
 189         };
 190
 191         serial_0_pins: serial_0_pinmux {
 192                 mux {
 193                         pins = "gpio16", "gpio17";
 194                         function = "blsp_uart0";
 195                         bias-disable;
 196                 };
 197         };
 198
 199         serial_1_pins: serial_1_pinmux {
 200                 mux {
 201                         pins = "gpio8", "gpio9";
 202                         function = "blsp_uart1";
 203                         bias-disable;
 204                 };
 205         };
 206 };
 207
 208 &nand {
 209         pinctrl-0 = <&nand_pins>;
 210         pinctrl-names = "default";
 211         status = "okay";
 212
 213         nand@0 {
 214                 partitions {
 215                         compatible = "fixed-partitions";
 216                         #address-cells = <1>;
 217                         #size-cells = <1>;
 218
 219                         partition@0 {
 220                                 /* 'aos0' in Aruba firmware */
 221                                 label = "aos0";
 222                                 reg = <0x0 0x2000000>;
 223                                 read-only;
 224                         };
 225
 226                         partition@2000000 {
 227                                 /* 'aos1' in Aruba firmware */
 228                                 label = "ubi";
 229                                 reg = <0x2000000 0x2000000>;
 230                         };
 231
 232                         partition@4000000 {
 233                                 label = "aruba-ubifs";
 234                                 reg = <0x4000000 0x4000000>;
 235                                 read-only;
 236                         };
 237                 };
 238         };
 239 };
 240
 241 &wifi0 {
 242         status = "okay";
 243         qcom,ath10k-calibration-variant = "Aruba-AP-303";
 244 };
 245
 246 &wifi1 {
 247         status = "okay";
 248         qcom,ath10k-calibration-variant = "Aruba-AP-303";
 249 };