target/linux/ipq40xx/image/Makefile

   1 include $(TOPDIR)/rules.mk
   2 include $(INCLUDE_DIR)/image.mk
   3
   4 define Device/Default
   5         PROFILES := Default
   6         KERNEL_DEPENDS = $$(wildcard $(DTS_DIR)/$$(DEVICE_DTS).dts)
   7         KERNEL_INITRAMFS_PREFIX := $$(IMG_PREFIX)-$(1)-initramfs
   8         KERNEL_PREFIX := $$(IMAGE_PREFIX)
   9         KERNEL_LOADADDR := 0x80208000
  10         SUPPORTED_DEVICES := $(subst _,$(comma),$(1))
  11         IMAGE/sysupgrade.bin = sysupgrade-tar | append-metadata
  12         IMAGE/sysupgrade.bin/squashfs :=
  13 endef
  14
  15 define Device/FitImage
  16         KERNEL_SUFFIX := -fit-uImage.itb
  17         KERNEL = kernel-bin | gzip | fit gzip $$(DTS_DIR)/$$(DEVICE_DTS).dtb
  18         KERNEL_NAME := Image
  19 endef
  20
  21 define Device/FitImageLzma
  22         KERNEL_SUFFIX := -fit-uImage.itb
  23         KERNEL = kernel-bin | lzma | fit lzma $$(DTS_DIR)/$$(DEVICE_DTS).dtb
  24         KERNEL_NAME := Image
  25 endef
  26
  27 define Device/UbiFit
  28         KERNEL_IN_UBI := 1
  29         IMAGES := nand-factory.ubi nand-sysupgrade.bin
  30         IMAGE/nand-factory.ubi := append-ubi
  31         IMAGE/nand-sysupgrade.bin := sysupgrade-tar | append-metadata
  32 endef
  33
  34 define Device/DniImage
  35         KERNEL_SUFFIX := -fit-uImage.itb
  36         KERNEL = kernel-bin | gzip | fit gzip $$(DTS_DIR)/$$(DEVICE_DTS).dtb
  37         KERNEL_NAME := Image
  38         NETGEAR_BOARD_ID :=
  39         NETGEAR_HW_ID :=
  40         IMAGES := factory.img sysupgrade.bin
  41         IMAGE/factory.img := append-kernel | pad-offset 64k 64 | append-uImage-fakehdr filesystem | pad-to $$$$(KERNEL_SIZE) | append-rootfs | pad-rootfs | netgear-dni
  42         IMAGE/sysupgrade.bin := append-kernel | pad-offset 64k 64 | append-uImage-fakehdr filesystem | pad-to $$$$(KERNEL_SIZE) | append-rootfs | pad-rootfs | append-metadata
  43 endef
  44 DEVICE_VARS += NETGEAR_BOARD_ID NETGEAR_HW_ID
  45
  46
  47 define Device/8dev_jalapeno
  48         $(call Device/FitImage)
  49         $(call Device/UbiFit)
  50         DEVICE_DTS := qcom-ipq4018-jalapeno
  51         BLOCKSIZE := 128k
  52         PAGESIZE := 2048
  53         DEVICE_TITLE := 8devices Jalapeno
  54 endef
  55 TARGET_DEVICES += 8dev_jalapeno
  56
  57 define Device/asus_rt-ac58u
  58         $(call Device/FitImageLzma)
  59         DEVICE_DTS := qcom-ipq4018-rt-ac58u
  60         BLOCKSIZE := 128k
  61         PAGESIZE := 2048
  62         DTB_SIZE := 65536
  63         DEVICE_TITLE := Asus RT-AC58U
  64         IMAGE_SIZE := 20439364
  65         FILESYSTEMS := squashfs
  66 #       Someone - in their infinite wisdom - decided to put the firmware
  67 #       version in front of the image name \03\00\00\04 => Version 3.0.0.4
  68 #       Since u-boot works with strings we either need another fixup step
  69 #       to add a version... or we are very careful not to add '\0' into that
  70 #       string and call it a day.... Yeah, we do the latter!
  71         UIMAGE_NAME:=$(shell echo -e '\03\01\01\01RT-AC58U')
  72         IMAGES := sysupgrade.bin
  73         DEVICE_PACKAGES := kmod-usb-ledtrig-usbport
  74 endef
  75 TARGET_DEVICES += asus_rt-ac58u
  76
  77 define Device/avm_fritzbox-4040
  78         $(call Device/FitImageLzma)
  79         DEVICE_DTS := qcom-ipq4018-fritz4040
  80         BOARD_NAME := fritz4040
  81         DEVICE_TITLE := AVM Fritz!Box 4040
  82         IMAGE_SIZE := 29753344
  83         IMAGES = sysupgrade.bin
  84         IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
  85         DEVICE_PACKAGES := fritz-tffs fritz-caldata u-boot-fritz4040
  86 endef
  87 TARGET_DEVICES += avm_fritzbox-4040
  88
  89 define Device/compex_wpj428
  90         $(call Device/FitImage)
  91         DEVICE_DTS := qcom-ipq4028-wpj428
  92         DEVICE_DTS_CONFIG := config@4
  93         BLOCKSIZE := 64k
  94         DEVICE_TITLE := Compex WPJ428
  95         IMAGE_SIZE := 31232k
  96         KERNEL_SIZE := 4096k
  97         IMAGES = sysupgrade.bin
  98         IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
  99         DEVICE_PACKAGES := kmod-gpio-beeper
 100 endef
 101 TARGET_DEVICES += compex_wpj428
 102
 103 define Device/glinet_gl-b1300
 104         $(call Device/FitImage)
 105         DEVICE_TITLE := GL.iNet GL-B1300
 106         BOARD_NAME := gl-b1300
 107         DEVICE_DTS := qcom-ipq4029-gl-b1300
 108         KERNEL_SIZE := 4096k
 109         IMAGE_SIZE := 26624k
 110         IMAGES := sysupgrade.bin
 111         IMAGE/sysupgrade.bin := append-kernel |append-rootfs | pad-rootfs | append-metadata
 112 endef
 113 TARGET_DEVICES += glinet_gl-b1300
 114
 115 define Device/meraki_mr33
 116         $(call Device/FitImage)
 117         DEVICE_DTS := qcom-ipq4029-mr33
 118         BLOCKSIZE := 131072
 119         PAGESIZE := 2048
 120         DEVICE_TITLE := Cisco Meraki MR33
 121         IMAGES = sysupgrade.bin
 122         DEVICE_PACKAGES := -swconfig ath10k-firmware-qca9887
 123 endef
 124 TARGET_DEVICES += meraki_mr33
 125
 126 define Device/netgear_ex61x0v2
 127         $(call Device/DniImage)
 128         KERNEL_SIZE := 3080192
 129         DEVICE_DTS_CONFIG := config@4
 130         NETGEAR_BOARD_ID := EX6150v2series
 131         NETGEAR_HW_ID := 29765285+16+0+128+2x2
 132 endef
 133
 134 define Device/netgear_ex6100v2
 135         $(call Device/netgear_ex61x0v2)
 136         DEVICE_DTS := qcom-ipq4018-ex6100v2
 137         DEVICE_TITLE := Netgear EX6100v2
 138 endef
 139 TARGET_DEVICES += netgear_ex6100v2
 140
 141 define Device/netgear_ex6150v2
 142         $(call Device/netgear_ex61x0v2)
 143         DEVICE_DTS := qcom-ipq4018-ex6150v2
 144         DEVICE_TITLE := Netgear EX6150v2
 145 endef
 146 TARGET_DEVICES += netgear_ex6150v2
 147
 148 define Device/openmesh_a42
 149         $(call Device/FitImageLzma)
 150         DEVICE_DTS := qcom-ipq4018-a42
 151         DEVICE_DTS_CONFIG := config@om.a42
 152         BLOCKSIZE := 64k
 153         DEVICE_TITLE := OpenMesh A42
 154         KERNEL = kernel-bin | lzma | fit lzma $$(DTS_DIR)/$$(DEVICE_DTS).dtb | pad-to $$(BLOCKSIZE)
 155         IMAGE_SIZE := 15616k
 156         IMAGES = factory.bin sysupgrade.bin
 157         IMAGE/factory.bin := append-rootfs | pad-rootfs | openmesh-image ce_type=A42
 158         IMAGE/sysupgrade.bin/squashfs := append-rootfs | pad-rootfs | sysupgrade-tar rootfs=$$$$@ | append-metadata
 159         DEVICE_PACKAGES := uboot-envtools
 160 endef
 161 TARGET_DEVICES += openmesh_a42
 162
 163 define Device/openmesh_a62
 164         $(call Device/FitImageLzma)
 165         DEVICE_DTS := qcom-ipq4019-a62
 166         DEVICE_DTS_CONFIG := config@om.a62
 167         BLOCKSIZE := 64k
 168         DEVICE_TITLE := OpenMesh A62
 169         KERNEL = kernel-bin | lzma | fit lzma $$(DTS_DIR)/$$(DEVICE_DTS).dtb | pad-to $$(BLOCKSIZE)
 170         IMAGE_SIZE := 15552k
 171         IMAGES = factory.bin sysupgrade.bin
 172         IMAGE/factory.bin := append-rootfs | pad-rootfs | openmesh-image ce_type=A62
 173         IMAGE/sysupgrade.bin/squashfs := append-rootfs | pad-rootfs | sysupgrade-tar rootfs=$$$$@ | append-metadata
 174         DEVICE_PACKAGES := ath10k-firmware-qca9888 uboot-envtools
 175 endef
 176
 177 TARGET_DEVICES += openmesh_a62
 178
 179 define Device/qcom_ap-dk01.1-c1
 180         DEVICE_TITLE := QCA AP-DK01.1-C1
 181         BOARD_NAME := ap-dk01.1-c1
 182         DEVICE_DTS := qcom-ipq4019-ap.dk01.1-c1
 183         KERNEL_INSTALL := 1
 184         KERNEL_SIZE := 4096k
 185         IMAGE_SIZE := 26624k
 186         $(call Device/FitImage)
 187         IMAGES := sysupgrade.bin
 188         IMAGE/sysupgrade.bin := append-kernel | pad-to $$$${KERNEL_SIZE} | append-rootfs | pad-rootfs | append-metadata
 189 endef
 190 TARGET_DEVICES += qcom_ap-dk01.1-c1
 191
 192 define Device/qcom_ap-dk04.1-c1
 193         $(call Device/FitImage)
 194         $(call Device/UbiFit)
 195         DEVICE_DTS := qcom-ipq4019-ap.dk04.1-c1
 196         KERNEL_INSTALL := 1
 197         KERNEL_SIZE := 4048k
 198         BLOCKSIZE := 128k
 199         PAGESIZE := 2048
 200         BOARD_NAME := ap-dk04.1-c1
 201         DEVICE_TITLE := QCA AP-DK04.1-C1
 202 endef
 203 TARGET_DEVICES += qcom_ap-dk04.1-c1
 204
 205 $(eval $(call BuildImage))