target/linux/ipq40xx/image/generic.mk

   1
   2 DEVICE_VARS += NETGEAR_BOARD_ID NETGEAR_HW_ID
   3 DEVICE_VARS += RAS_BOARD RAS_ROOTFS_SIZE RAS_VERSION
   4 DEVICE_VARS += WRGG_DEVNAME WRGG_SIGNATURE
   5
   6 define Device/FitImage
   7         KERNEL_SUFFIX := -fit-uImage.itb
   8         KERNEL = kernel-bin | gzip | fit gzip $$(KDIR)/image-$$(DEVICE_DTS).dtb
   9         KERNEL_NAME := Image
  10 endef
  11
  12 define Device/FitImageLzma
  13         KERNEL_SUFFIX := -fit-uImage.itb
  14         KERNEL = kernel-bin | lzma | fit lzma $$(KDIR)/image-$$(DEVICE_DTS).dtb
  15         KERNEL_NAME := Image
  16 endef
  17
  18 define Device/FitzImage
  19         KERNEL_SUFFIX := -fit-zImage.itb
  20         KERNEL = kernel-bin | fit none $$(KDIR)/image-$$(DEVICE_DTS).dtb
  21         KERNEL_NAME := zImage
  22 endef
  23
  24 define Device/UbiFit
  25         KERNEL_IN_UBI := 1
  26         IMAGES := nand-factory.ubi nand-sysupgrade.bin
  27         IMAGE/nand-factory.ubi := append-ubi
  28         IMAGE/nand-sysupgrade.bin := sysupgrade-tar | append-metadata
  29 endef
  30
  31 define Device/DniImage
  32         $(call Device/FitzImage)
  33         NETGEAR_BOARD_ID :=
  34         NETGEAR_HW_ID :=
  35         IMAGES += factory.img
  36         IMAGE/factory.img := append-kernel | pad-offset 64k 64 | append-uImage-fakehdr filesystem | append-rootfs | pad-rootfs | netgear-dni
  37         IMAGE/sysupgrade.bin := append-kernel | pad-offset 64k 64 | append-uImage-fakehdr filesystem | \
  38                 append-rootfs | pad-rootfs | check-size | append-metadata
  39 endef
  40
  41 define Build/append-rootfshdr
  42         mkimage -A $(LINUX_KARCH) \
  43                 -O linux -T filesystem \
  44                 -C lzma -a $(KERNEL_LOADADDR) -e $(if $(KERNEL_ENTRY),$(KERNEL_ENTRY),$(KERNEL_LOADADDR)) \
  45                 -n root.squashfs -d $(IMAGE_ROOTFS) $@.new
  46         cat $(IMAGE_KERNEL) > $@.$1
  47         dd if=$@.new bs=64 count=1 >> $@.$1
  48 endef
  49
  50 define Build/append-rutx-metadata
  51         echo \
  52                 '{ \
  53                         "device_code": [".*"], \
  54                         "hwver": [".*"], \
  55                         "batch": [".*"], \
  56                         "serial": [".*"], \
  57                         "supported_devices":["teltonika,rutx"] \
  58                 }' | fwtool -I - $@
  59 endef
  60
  61 define Build/copy-file
  62         cat "$(1)" > "$@"
  63 endef
  64
  65 define Build/mkmylofw_32m
  66         $(eval device_id=$(word 1,$(1)))
  67         $(eval revision=$(word 2,$(1)))
  68
  69         let \
  70                 size="$$(stat -c%s $@)" \
  71                 pad="$(subst k,* 1024,$(BLOCKSIZE))" \
  72                 pad="(pad - (size % pad)) % pad" \
  73                 newsize='size + pad'; \
  74                 $(STAGING_DIR_HOST)/bin/mkmylofw \
  75                 -B WPE72 -i 0x11f6:$(device_id):0x11f6:$(device_id) -r $(revision) \
  76                 -s 0x2000000 -p0x180000:$$newsize:al:0x80208000:"OpenWrt":$@ \
  77                 $@.new
  78         @mv $@.new $@
  79 endef
  80
  81 define Build/wac5xx-netgear-tar
  82         mkdir $@.tmp
  83         mv $@ $@.tmp/wac5xx-ubifs-root.img
  84         md5sum $@.tmp/wac5xx-ubifs-root.img > $@.tmp/wac5xx-ubifs-root.md5sum
  85         echo "WAC505 WAC510" > $@.tmp/metadata.txt
  86         echo "WAC505_V9.9.9.9" > $@.tmp/version
  87         tar -C $@.tmp/ -cf $@ .
  88         rm -rf $@.tmp
  89 endef
  90
  91 define Build/qsdk-ipq-factory-nand-askey
  92         $(TOPDIR)/scripts/mkits-qsdk-ipq-image.sh $@.its\
  93                 askey_kernel $@.$1 \
  94                 askey_fs $(IMAGE_ROOTFS) \
  95                 ubifs $@
  96         PATH=$(LINUX_DIR)/scripts/dtc:$(PATH) mkimage -f $@.its $@.new
  97         @mv $@.new $@
  98 endef
  99
 100 define Build/qsdk-ipq-app-gpt
 101         cp $@ $@.tmp 2>/dev/null || true
 102         ptgen -g -o $@.tmp -a 1 -l 1024 \
 103                         -t 0x2e -N 0:HLOS -r -p 32M \
 104                         -t 0x83 -N rootfs -r -p 128M \
 105                                 -N rootfs_data -p 512M
 106         cat $@.tmp >> $@
 107         rm $@.tmp
 108 endef
 109
 110 define Build/SenaoFW
 111         -$(STAGING_DIR_HOST)/bin/mksenaofw \
 112                 -n $(BOARD_NAME) -r $(VENDOR_ID) -p $(1) \
 113                 -c $(DATECODE) -w $(2) -x $(CW_VER) -t 0 \
 114                 -e $@ \
 115                 -o $@.new
 116         @cp $@.new $@
 117 endef
 118
 119 define Build/wrgg-image
 120         mkwrggimg -i $@ \
 121         -o $@.new \
 122         -d "$(WRGG_DEVNAME)" \
 123         -s "$(WRGG_SIGNATURE)" \
 124         -v "" -m "" -B ""
 125         mv $@.new $@
 126 endef
 127
 128 define Device/8dev_habanero-dvk
 129         $(call Device/FitImageLzma)
 130         DEVICE_VENDOR := 8devices
 131         DEVICE_MODEL := Habanero DVK
 132         IMAGE_SIZE := 30976k
 133         SOC := qcom-ipq4019
 134         IMAGE/sysupgrade.bin := append-kernel | pad-to 64k | append-rootfs | pad-rootfs | check-size | append-metadata
 135 endef
 136 TARGET_DEVICES += 8dev_habanero-dvk
 137
 138 define Device/8dev_jalapeno-common
 139         $(call Device/FitImage)
 140         $(call Device/UbiFit)
 141         BLOCKSIZE := 128k
 142         PAGESIZE := 2048
 143         SOC := qcom-ipq4018
 144 endef
 145
 146 define Device/8dev_jalapeno
 147         $(call Device/8dev_jalapeno-common)
 148         DEVICE_VENDOR := 8devices
 149         DEVICE_MODEL := Jalapeno
 150 endef
 151 TARGET_DEVICES += 8dev_jalapeno
 152
 153 define Device/alfa-network_ap120c-ac
 154         $(call Device/FitImage)
 155         $(call Device/UbiFit)
 156         DEVICE_VENDOR := ALFA Network
 157         DEVICE_MODEL := AP120C-AC
 158         SOC := qcom-ipq4018
 159         DEVICE_PACKAGES := kmod-usb-acm kmod-tpm-i2c-atmel
 160         BLOCKSIZE := 128k
 161         PAGESIZE := 2048
 162         IMAGE_SIZE := 65536k
 163         IMAGES := nand-factory.bin nand-sysupgrade.bin
 164         IMAGE/nand-factory.bin := append-ubi | qsdk-ipq-factory-nand
 165 endef
 166 TARGET_DEVICES += alfa-network_ap120c-ac
 167
 168 define Device/aruba_glenmorangie
 169         $(call Device/FitImageLzma)
 170         DEVICE_VENDOR := Aruba
 171         SOC := qcom-ipq4029
 172 endef
 173
 174 define Device/aruba_ap-303
 175         $(call Device/aruba_glenmorangie)
 176         DEVICE_MODEL := AP-303
 177 endef
 178 TARGET_DEVICES += aruba_ap-303
 179
 180 define Device/aruba_ap-303h
 181         $(call Device/aruba_glenmorangie)
 182         DEVICE_MODEL := AP-303H
 183 endef
 184 # Missing DSA Setup
 185 #TARGET_DEVICES += aruba_ap-303h
 186
 187 define Device/aruba_ap-365
 188         $(call Device/aruba_glenmorangie)
 189         DEVICE_MODEL := AP-365
 190         DEVICE_PACKAGES := kmod-hwmon-ad7418 ipq-wifi-aruba_ap-365
 191 endef
 192 # Missing DSA Setup
 193 #TARGET_DEVICES += aruba_ap-365
 194
 195 define Device/asus_map-ac2200
 196         $(call Device/FitImageLzma)
 197         DEVICE_VENDOR := ASUS
 198         DEVICE_MODEL := Lyra (MAP-AC2200)
 199         SOC := qcom-ipq4019
 200         DEVICE_PACKAGES := ath10k-firmware-qca9888-ct kmod-ath3k
 201 endef
 202 TARGET_DEVICES += asus_map-ac2200
 203
 204 # WARNING: this is an initramfs image that gets you half of the way there
 205 #          you need to delete the jffs2 ubi volume and sysupgrade to the final image
 206 # to get a "trx" you can flash via web UI for ac42u/ac58u:
 207 # - change call Device/FitImageLzma to Device/FitImage
 208 # - add the following below UIMAGE_NAME
 209 #   UIMAGE_MAGIC := 0x27051956
 210 #   IMAGES += factory.trx
 211 #   IMAGE/factory.trx := copy-file $(KDIR)/tmp/$$(KERNEL_INITRAMFS_IMAGE) | uImage none
 212 define Device/asus_rt-ac42u
 213         $(call Device/FitImageLzma)
 214         DEVICE_VENDOR := ASUS
 215         DEVICE_MODEL := RT-AC42U
 216         DEVICE_ALT0_VENDOR := ASUS
 217         DEVICE_ALT0_MODEL := RT-ACRH17
 218         DEVICE_ALT1_VENDOR := ASUS
 219         DEVICE_ALT1_MODEL := RT-AC2200
 220         SOC := qcom-ipq4019
 221         BLOCKSIZE := 128k
 222         PAGESIZE := 2048
 223         IMAGE_SIZE := 20439364
 224         FILESYSTEMS := squashfs
 225 #       RT-AC82U is nowhere to be found online
 226 #       Rather, this device is a/k/a RT-AC42U
 227 #       But we'll go with what the vendor firmware has...
 228         UIMAGE_NAME:=$(shell echo -e '\03\01\01\01RT-AC82U')
 229         DEVICE_PACKAGES := ath10k-firmware-qca9984-ct kmod-usb-ledtrig-usbport
 230 endef
 231 TARGET_DEVICES += asus_rt-ac42u
 232
 233 define Device/asus_rt-ac58u
 234         $(call Device/FitImageLzma)
 235         DEVICE_VENDOR := ASUS
 236         DEVICE_MODEL := RT-AC58U
 237         DEVICE_ALT0_VENDOR := ASUS
 238         DEVICE_ALT0_MODEL := RT-ACRH13
 239         SOC := qcom-ipq4018
 240         BLOCKSIZE := 128k
 241         PAGESIZE := 2048
 242         IMAGE_SIZE := 20439364
 243         FILESYSTEMS := squashfs
 244 #       Someone - in their infinite wisdom - decided to put the firmware
 245 #       version in front of the image name \03\00\00\04 => Version 3.0.0.4
 246 #       Since u-boot works with strings we either need another fixup step
 247 #       to add a version... or we are very careful not to add '\0' into that
 248 #       string and call it a day.... Yeah, we do the latter!
 249         UIMAGE_NAME:=$(shell echo -e '\03\01\01\01RT-AC58U')
 250         DEVICE_PACKAGES := -kmod-ath10k-ct kmod-ath10k-ct-smallbuffers \
 251                 kmod-usb-ledtrig-usbport
 252 endef
 253 TARGET_DEVICES += asus_rt-ac58u
 254
 255 define Device/avm_fritzbox-4040
 256         $(call Device/FitImageLzma)
 257         DEVICE_VENDOR := AVM
 258         DEVICE_MODEL := FRITZ!Box 4040
 259         SOC := qcom-ipq4018
 260         BOARD_NAME := fritz4040
 261         IMAGE_SIZE := 29056k
 262         UBOOT_PATH := $(STAGING_DIR_IMAGE)/uboot-fritz4040.bin
 263         UBOOT_PARTITION_SIZE := 524288
 264         IMAGES += eva.bin
 265         IMAGE/eva.bin := append-uboot | pad-to $$$$(UBOOT_PARTITION_SIZE) | append-kernel | append-rootfs | pad-rootfs
 266         IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | check-size | append-metadata
 267         DEVICE_PACKAGES := fritz-tffs fritz-caldata
 268 endef
 269 TARGET_DEVICES += avm_fritzbox-4040
 270
 271 define Device/avm_fritzbox-7530
 272         $(call Device/FitImageLzma)
 273         DEVICE_VENDOR := AVM
 274         DEVICE_MODEL := FRITZ!Box 7530
 275         DEVICE_ALT0_VENDOR := AVM
 276         DEVICE_ALT0_MODEL := FRITZ!Box 7520
 277         SOC := qcom-ipq4019
 278         DEVICE_PACKAGES := fritz-caldata fritz-tffs-nand
 279 endef
 280 TARGET_DEVICES += avm_fritzbox-7530
 281
 282 define Device/avm_fritzrepeater-1200
 283         $(call Device/FitImageLzma)
 284         DEVICE_VENDOR := AVM
 285         DEVICE_MODEL := FRITZ!Repeater 1200
 286         SOC := qcom-ipq4019
 287         DEVICE_PACKAGES := fritz-caldata fritz-tffs-nand
 288 endef
 289 TARGET_DEVICES += avm_fritzrepeater-1200
 290
 291 define Device/avm_fritzrepeater-3000
 292         $(call Device/FitImageLzma)
 293         DEVICE_VENDOR := AVM
 294         DEVICE_MODEL := FRITZ!Repeater 3000
 295         SOC := qcom-ipq4019
 296         DEVICE_PACKAGES := ath10k-firmware-qca9984-ct fritz-caldata fritz-tffs-nand
 297 endef
 298 # Missing DSA Setup
 299 #TARGET_DEVICES += avm_fritzrepeater-3000
 300
 301 define Device/buffalo_wtr-m2133hp
 302         $(call Device/FitImage)
 303         $(call Device/UbiFit)
 304         DEVICE_VENDOR := Buffalo
 305         DEVICE_MODEL := WTR-M2133HP
 306         SOC := qcom-ipq4019
 307         DEVICE_PACKAGES := ath10k-firmware-qca9984-ct
 308         BLOCKSIZE := 128k
 309         PAGESIZE := 2048
 310 endef
 311 # Missing DSA Setup
 312 #TARGET_DEVICES += buffalo_wtr-m2133hp
 313
 314 define Device/cellc_rtl30vw
 315         KERNEL_SUFFIX := -fit-zImage.itb
 316         KERNEL_INITRAMFS = kernel-bin | gzip | fit gzip $$(KDIR)/image-$$(DEVICE_DTS).dtb
 317         KERNEL = kernel-bin | fit none $$(KDIR)/image-$$(DEVICE_DTS).dtb | uImage lzma | pad-to 2048
 318         KERNEL_NAME := zImage
 319         KERNEL_IN_UBI :=
 320         IMAGES := nand-factory.bin nand-sysupgrade.bin
 321         IMAGE/nand-factory.bin := append-rootfshdr kernel | append-ubi | qsdk-ipq-factory-nand-askey kernel
 322         IMAGE/nand-sysupgrade.bin := append-rootfshdr kernel | sysupgrade-tar kernel=$$$$@.kernel | append-metadata
 323         DEVICE_VENDOR := Cell C
 324         DEVICE_MODEL := RTL30VW
 325         SOC := qcom-ipq4019
 326         DEVICE_DTS_CONFIG := config@5
 327         KERNEL_INSTALL := 1
 328         KERNEL_SIZE := 4096k
 329         IMAGE_SIZE := 57344k
 330         BLOCKSIZE := 128k
 331         PAGESIZE := 2048
 332         DEVICE_PACKAGES := kmod-usb-net-qmi-wwan kmod-usb-serial-option uqmi
 333 endef
 334 TARGET_DEVICES += cellc_rtl30vw
 335
 336 define Device/cilab_meshpoint-one
 337         $(call Device/8dev_jalapeno-common)
 338         DEVICE_VENDOR := Crisis Innovation Lab
 339         DEVICE_MODEL := MeshPoint.One
 340         DEVICE_PACKAGES := kmod-i2c-gpio kmod-iio-bmp280-i2c kmod-hwmon-ina2xx kmod-rtc-pcf2127
 341 endef
 342 # Missing DSA Setup
 343 #TARGET_DEVICES += cilab_meshpoint-one
 344
 345 define Device/compex_wpj419
 346         $(call Device/FitImage)
 347         $(call Device/UbiFit)
 348         DEVICE_VENDOR := Compex
 349         DEVICE_MODEL := WPJ419
 350         SOC := qcom-ipq4019
 351         DEVICE_DTS_CONFIG := config@12
 352         KERNEL_INSTALL := 1
 353         BLOCKSIZE := 128k
 354         PAGESIZE := 2048
 355         FILESYSTEMS := squashfs
 356 endef
 357 # Missing DSA Setup
 358 #TARGET_DEVICES += compex_wpj419
 359
 360 define Device/compex_wpj428
 361         $(call Device/FitImage)
 362         DEVICE_VENDOR := Compex
 363         DEVICE_MODEL := WPJ428
 364         SOC := qcom-ipq4028
 365         DEVICE_DTS_CONFIG := config@4
 366         BLOCKSIZE := 64k
 367         IMAGE_SIZE := 31232k
 368         KERNEL_SIZE := 4096k
 369         IMAGES += cpximg-6a04.bin
 370         IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
 371         IMAGE/cpximg-6a04.bin := append-kernel | append-rootfs | pad-rootfs | mkmylofw_32m 0x8A2 3
 372         DEVICE_PACKAGES := kmod-gpio-beeper
 373         DEFAULT := n
 374 endef
 375 TARGET_DEVICES += compex_wpj428
 376
 377 define Device/devolo_magic-2-wifi-next
 378         $(call Device/FitImage)
 379         DEVICE_VENDOR := devolo
 380         DEVICE_MODEL := Magic 2 WiFi next
 381         SOC := qcom-ipq4018
 382         KERNEL_SIZE := 4096k
 383
 384         # If the bootloader sees 0xDEADC0DE and this trailer at the 64k boundary of a TFTP image
 385         # it will bootm it, just like we want for the initramfs.
 386         KERNEL_INITRAMFS := kernel-bin | gzip | fit gzip $$(KDIR)/image-$$(DEVICE_DTS).dtb | pad-to 64k |\
 387                 append-string -e '\xDE\xAD\xC0\xDE{"fl_initramfs":""}\x00'
 388
 389         IMAGE_SIZE := 26624k
 390         IMAGES := sysupgrade.bin
 391         IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
 392         DEVICE_PACKAGES := ipq-wifi-devolo_magic-2-wifi-next
 393         DEFAULT := n
 394 endef
 395 # Missing DSA Setup
 396 #TARGET_DEVICES += devolo_magic-2-wifi-next
 397
 398 define Device/dlink_dap-2610
 399         $(call Device/FitImageLzma)
 400         DEVICE_VENDOR := D-Link
 401         DEVICE_MODEL := DAP-2610
 402         SOC := qcom-ipq4018
 403         DEVICE_DTS_CONFIG := config@ap.dk01.1-c1
 404         BLOCKSIZE := 64k
 405         WRGG_DEVNAME := /dev/mtdblock/8
 406         WRGG_SIGNATURE := wapac30_dkbs_dap2610
 407         IMAGE_SIZE := 14080k
 408         IMAGES += factory.bin
 409         # Bootloader expects a special 160 byte header which is added by
 410         # wrgg-image.
 411         # Factory image size must be larger than 6MB, and size in wrgg header must
 412         # match actual factory image size to be flashable from D-Link http server.
 413         # Bootloader verifies checksum of wrgg image before booting, thus jffs2
 414         # cannot be part of the wrgg image. This is solved in the factory image by
 415         # having the rootfs at the end of the image (without pad-rootfs). And in
 416         # the sysupgrade image only the kernel is included in the wrgg checksum,
 417         # but this is not flashable from the D-link http server.
 418         # append-rootfs must start on an erase block boundary.
 419         IMAGE/factory.bin    := append-kernel | pad-offset 6144k 160 | append-rootfs | wrgg-image | check-size
 420         IMAGE/sysupgrade.bin := append-kernel | wrgg-image | pad-to $$$$(BLOCKSIZE) | append-rootfs | pad-rootfs | check-size | append-metadata
 421 endef
 422 TARGET_DEVICES += dlink_dap-2610
 423
 424 define Device/edgecore_ecw5211
 425         $(call Device/FitImage)
 426         $(call Device/UbiFit)
 427         DEVICE_VENDOR := Edgecore
 428         DEVICE_MODEL := ECW5211
 429         SOC := qcom-ipq4018
 430         BLOCKSIZE := 128k
 431         PAGESIZE := 2048
 432         DEVICE_DTS_CONFIG := config@ap.dk01.1-c2
 433         DEVICE_PACKAGES := kmod-tpm-i2c-atmel kmod-usb-acm
 434 endef
 435 TARGET_DEVICES += edgecore_ecw5211
 436
 437 define Device/edgecore_oap100
 438         $(call Device/FitImage)
 439         $(call Device/UbiFit)
 440         DEVICE_VENDOR := Edgecore
 441         DEVICE_MODEL := OAP100
 442         SOC := qcom-ipq4019
 443         BLOCKSIZE := 128k
 444         PAGESIZE := 2048
 445         IMAGES := nand-sysupgrade.bin
 446         DEVICE_DTS_CONFIG := config@ap.dk07.1-c1
 447         DEVICE_PACKAGES := ipq-wifi-edgecore_oap100 kmod-usb-acm kmod-usb-net kmod-usb-net-cdc-qmi uqmi
 448 endef
 449 # Missing DSA Setup
 450 #TARGET_DEVICES += edgecore_oap100
 451
 452 define Device/engenius_eap1300
 453         $(call Device/FitImage)
 454         DEVICE_VENDOR := EnGenius
 455         DEVICE_MODEL := EAP1300
 456         DEVICE_DTS_CONFIG := config@4
 457         BOARD_NAME := eap1300
 458         SOC := qcom-ipq4018
 459         KERNEL_SIZE := 5120k
 460         IMAGE_SIZE := 25344k
 461         IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
 462 endef
 463 # Missing DSA Setup
 464 #TARGET_DEVICES += engenius_eap1300
 465
 466 define Device/engenius_eap2200
 467         $(call Device/FitImage)
 468         $(call Device/UbiFit)
 469         DEVICE_VENDOR := EnGenius
 470         DEVICE_MODEL := EAP2200
 471         SOC := qcom-ipq4019
 472         BLOCKSIZE := 128k
 473         PAGESIZE := 2048
 474         DEVICE_PACKAGES := ath10k-firmware-qca9888-ct -kmod-ath10k-ct kmod-ath10k-ct-smallbuffers
 475 endef
 476 # Missing DSA Setup
 477 #TARGET_DEVICES += engenius_eap2200
 478
 479 define Device/engenius_emd1
 480         $(call Device/FitImage)
 481         DEVICE_VENDOR := EnGenius
 482         DEVICE_MODEL := EMD1
 483         DEVICE_DTS_CONFIG := config@4
 484         SOC := qcom-ipq4018
 485         IMAGE_SIZE := 30720k
 486         IMAGES += factory.bin
 487         IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
 488         IMAGE/factory.bin := qsdk-ipq-factory-nor | check-size
 489 endef
 490 # Missing DSA Setup
 491 #TARGET_DEVICES += engenius_emd1
 492
 493 define Device/engenius_emr3500
 494         $(call Device/FitImage)
 495         DEVICE_VENDOR := EnGenius
 496         DEVICE_MODEL := EMR3500
 497         DEVICE_DTS_CONFIG := config@4
 498         SOC := qcom-ipq4018
 499         KERNEL_SIZE := 4096k
 500         IMAGE_SIZE := 30720k
 501         IMAGES += factory.bin
 502         IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
 503         IMAGE/factory.bin := qsdk-ipq-factory-nor | check-size
 504         DEFAULT := n
 505 endef
 506 # Missing DSA Setup
 507 #TARGET_DEVICES += engenius_emr3500
 508
 509 define Device/engenius_ens620ext
 510         $(call Device/FitImage)
 511         DEVICE_VENDOR := EnGenius
 512         DEVICE_MODEL := ENS620EXT
 513         SOC := qcom-ipq4018
 514         DEVICE_DTS_CONFIG := config@4
 515         BLOCKSIZE := 64k
 516         PAGESIZE := 256
 517         BOARD_NAME := ENS620EXT
 518         VENDOR_ID := 0x0101
 519         PRODUCT_ID := 0x79
 520         PRODUCT_ID_NEW := 0xA4
 521         DATECODE := 190507
 522         FW_VER := 3.1.2
 523         FW_VER_NEW := 3.5.6
 524         CW_VER := 1.8.99
 525         IMAGE_SIZE := 21312k
 526         KERNEL_SIZE := 5120k
 527         FILESYSTEMS := squashfs
 528         IMAGES += factory_30.bin factory_35.bin
 529         IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | check-size | append-metadata
 530         IMAGE/factory_30.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-rootfs | pad-rootfs | check-size | SenaoFW $$$$(PRODUCT_ID) $$$$(FW_VER)
 531         IMAGE/factory_35.bin := qsdk-ipq-factory-nor | check-size | SenaoFW $$$$(PRODUCT_ID_NEW) $$$$(FW_VER_NEW)
 532 endef
 533 # Missing DSA Setup
 534 #TARGET_DEVICES += engenius_ens620ext
 535
 536 define Device/extreme-networks_ws-ap3915i
 537         $(call Device/FitImage)
 538         DEVICE_VENDOR := Extreme Networks
 539         DEVICE_MODEL := WS-AP3915i
 540         IMAGE_SIZE := 30080k
 541         SOC := qcom-ipq4029
 542         BLOCKSIZE := 128k
 543         IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | check-size | append-metadata
 544         DEVICE_PACKAGES := ipq-wifi-extreme-networks_ws-ap3915i
 545 endef
 546 # Missing DSA Setup
 547 #TARGET_DEVICES += extreme-networks_ws-ap3915i
 548
 549 define Device/ezviz_cs-w3-wd1200g-eup
 550         $(call Device/FitImage)
 551         DEVICE_VENDOR := EZVIZ
 552         DEVICE_MODEL := CS-W3-WD1200G
 553         DEVICE_VARIANT := EUP
 554         IMAGE_SIZE := 14848k
 555         KERNEL_SIZE = 6m
 556         SOC := qcom-ipq4018
 557         IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | \
 558                 append-metadata
 559         DEVICE_PACKAGES := -kmod-ath10k-ct kmod-ath10k-ct-smallbuffers
 560         DEVICE_COMPAT_VERSION := 2.0
 561         DEVICE_COMPAT_MESSAGE := uboot's bootcmd has to be updated (see wiki). \
 562                 Upgrade via sysupgrade mechanism is not possible.
 563 endef
 564 # Missing DSA Setup
 565 #TARGET_DEVICES += ezviz_cs-w3-wd1200g-eup
 566
 567 define Device/glinet_gl-a1300
 568         $(call Device/FitImage)
 569         $(call Device/UbiFit)
 570         DEVICE_VENDOR := GL.iNet
 571         DEVICE_MODEL := GL-A1300
 572         SOC := qcom-ipq4018
 573         DEVICE_DTS_CONFIG := config@ap.dk01.1-c2
 574         BLOCKSIZE := 128k
 575         PAGESIZE := 2048
 576         IMAGE_SIZE := 131072k
 577         DEVICE_PACKAGE := ipq-wifi-glinet_gl-a1300
 578 endef
 579 TARGET_DEVICES += glinet_gl-a1300
 580
 581 define Device/glinet_gl-ap1300
 582         $(call Device/FitImage)
 583         $(call Device/UbiFit)
 584         DEVICE_VENDOR := GL.iNet
 585         DEVICE_MODEL := GL-AP1300
 586         SOC := qcom-ipq4018
 587         DEVICE_DTS_CONFIG := config@ap.dk01.1-c2
 588         BLOCKSIZE := 128k
 589         PAGESIZE := 2048
 590         IMAGE_SIZE := 131072k
 591         KERNEL_INSTALL := 1
 592         DEVICE_PACKAGES := ipq-wifi-glinet_gl-ap1300 kmod-usb-net-qmi-wwan kmod-usb-serial-option uqmi
 593 endef
 594 # Missing DSA Setup
 595 #TARGET_DEVICES += glinet_gl-ap1300
 596
 597 define Device/glinet_gl-b1300
 598         $(call Device/FitzImage)
 599         DEVICE_VENDOR := GL.iNet
 600         DEVICE_MODEL := GL-B1300
 601         BOARD_NAME := gl-b1300
 602         SOC := qcom-ipq4029
 603         KERNEL_SIZE := 4096k
 604         IMAGE_SIZE := 26624k
 605         IMAGE/sysupgrade.bin := append-kernel |append-rootfs | pad-rootfs | append-metadata
 606 endef
 607 TARGET_DEVICES += glinet_gl-b1300
 608
 609 define Device/glinet_gl-b2200
 610         $(call Device/FitzImage)
 611         DEVICE_VENDOR := GL.iNet
 612         DEVICE_MODEL := GL-B2200
 613         SOC := qcom-ipq4019
 614         DEVICE_DTS_CONFIG := config@ap.dk04.1-c3
 615         KERNEL_INITRAMFS_SUFFIX := -recovery.itb
 616         IMAGES := emmc.img.gz sysupgrade.bin
 617         IMAGE/emmc.img.gz := qsdk-ipq-app-gpt |\
 618                 pad-to 1024k | append-kernel |\
 619                 pad-to 33792k | append-rootfs |\
 620                 append-metadata | gzip
 621         IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
 622         DEVICE_PACKAGES := ath10k-firmware-qca9888-ct \
 623                 kmod-fs-ext4 kmod-mmc kmod-spi-dev mkf2fs e2fsprogs kmod-fs-f2fs
 624 endef
 625 TARGET_DEVICES += glinet_gl-b2200
 626
 627 define Device/glinet_gl-s1300
 628         $(call Device/FitzImage)
 629         DEVICE_VENDOR := GL.iNet
 630         DEVICE_MODEL := GL-S1300
 631         SOC := qcom-ipq4029
 632         KERNEL_SIZE := 4096k
 633         IMAGE_SIZE := 26624k
 634         IMAGES := sysupgrade.bin
 635         IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
 636         DEVICE_PACKAGES := ipq-wifi-glinet_gl-s1300 kmod-fs-ext4 kmod-mmc kmod-spi-dev
 637 endef
 638 # Missing DSA Setup
 639 #TARGET_DEVICES += glinet_gl-s1300
 640
 641 define Device/linksys_ea6350v3
 642         # The Linksys EA6350v3 has a uboot bootloader that does not
 643         # support either booting lzma kernel images nor booting UBI
 644         # partitions. This uboot, however, supports raw kernel images and
 645         # gzipped images.
 646         #
 647         # As for the time of writing this, the device will boot the kernel
 648         # from a fixed address with a fixed length of 3MiB. Also, the
 649         # device has a hard-coded kernel command line that requieres the
 650         # rootfs and alt_rootfs to be in mtd11 and mtd13 respectively.
 651         # Oh... and the kernel partition overlaps with the rootfs
 652         # partition (the same for alt_kernel and alt_rootfs).
 653         #
 654         # If you are planing re-partitioning the device, you may want to
 655         # keep those details in mind:
 656         # 1. The kernel adresses you should honor are 0x00000000 and
 657         #    0x02800000 respectively.
 658         # 2. The kernel size (plus the dtb) cannot exceed 3.00MiB in size.
 659         # 3. You can use 'zImage', but not a raw 'Image' packed with lzma.
 660         # 4. The kernel command line from uboot is harcoded to boot with
 661         #    rootfs either in mtd11 or mtd13.
 662         $(call Device/FitzImage)
 663         DEVICE_VENDOR := Linksys
 664         DEVICE_MODEL := EA6350
 665         DEVICE_VARIANT := v3
 666         SOC := qcom-ipq4018
 667         BLOCKSIZE := 128k
 668         PAGESIZE := 2048
 669         KERNEL_SIZE := 3072k
 670         IMAGE_SIZE := 37888k
 671         UBINIZE_OPTS := -E 5
 672         IMAGES += factory.bin
 673         IMAGE/factory.bin := append-kernel | append-uImage-fakehdr filesystem | pad-to $$$$(KERNEL_SIZE) | append-ubi | linksys-image type=EA6350v3
 674         DEFAULT := n
 675 endef
 676 TARGET_DEVICES += linksys_ea6350v3
 677
 678 define Device/linksys_ea8300
 679         $(call Device/FitzImage)
 680         DEVICE_VENDOR := Linksys
 681         DEVICE_MODEL := EA8300
 682         SOC := qcom-ipq4019
 683         KERNEL_SIZE := 3072k
 684         IMAGE_SIZE := 87040k
 685         BLOCKSIZE := 128k
 686         PAGESIZE := 2048
 687         UBINIZE_OPTS := -E 5    # EOD marks to "hide" factory sig at EOF
 688         IMAGES += factory.bin
 689         IMAGE/factory.bin  := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-ubi | linksys-image type=EA8300
 690         DEVICE_PACKAGES := ath10k-firmware-qca9888-ct ipq-wifi-linksys_ea8300 kmod-usb-ledtrig-usbport
 691         DEFAULT := n
 692 endef
 693 TARGET_DEVICES += linksys_ea8300
 694
 695 define Device/linksys_mr8300
 696         $(call Device/FitzImage)
 697         DEVICE_VENDOR := Linksys
 698         DEVICE_MODEL := MR8300
 699         SOC := qcom-ipq4019
 700         KERNEL_SIZE := 3072k
 701         IMAGE_SIZE := 87040k
 702         BLOCKSIZE := 128k
 703         PAGESIZE := 2048
 704         UBINIZE_OPTS := -E 5    # EOD marks to "hide" factory sig at EOF
 705         IMAGES += factory.bin
 706         IMAGE/factory.bin  := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-ubi | linksys-image type=MR8300
 707         DEVICE_PACKAGES := ath10k-firmware-qca9888-ct kmod-usb-ledtrig-usbport
 708         DEFAULT := n
 709 endef
 710 TARGET_DEVICES += linksys_mr8300
 711
 712 define Device/linksys_whw01-v1
 713         $(call Device/FitzImage)
 714         DEVICE_VENDOR := Linksys
 715         DEVICE_MODEL := WHW01
 716         DEVICE_VARIANT := v1
 717         KERNEL_SIZE := 6144k
 718         IMAGE_SIZE := 28704512  # 28032k minus linksys signature (256-bytes).
 719         SOC := qcom-ipq4018
 720         BLOCKSIZE := 128k
 721         PAGESIZE := 2048
 722         UBINIZE_OPTS := -E 5    # EOD marks to "hide" factory sig at EOF
 723         IMAGES += factory.bin
 724         IMAGE/factory.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | \
 725                 append-ubi | linksys-image type=WHW01 | pad-to $$$$(PAGESIZE) | \
 726                 check-size
 727         DEVICE_PACKAGES := uboot-envtools kmod-leds-pca963x
 728 endef
 729 # Missing DSA Setup
 730 #TARGET_DEVICES += linksys_whw01-v1
 731
 732 define Device/luma_wrtq-329acn
 733         $(call Device/FitImage)
 734         DEVICE_VENDOR := Luma Home
 735         DEVICE_MODEL := WRTQ-329ACN
 736         SOC := qcom-ipq4018
 737         DEVICE_PACKAGES := kmod-ath3k kmod-eeprom-at24 kmod-i2c-gpio
 738         IMAGE_SIZE := 76632k
 739         BLOCKSIZE := 128k
 740         PAGESIZE := 2048
 741 endef
 742 TARGET_DEVICES += luma_wrtq-329acn
 743
 744 define Device/meraki_mr33
 745         $(call Device/FitImage)
 746         DEVICE_VENDOR := Cisco Meraki
 747         DEVICE_MODEL := MR33
 748         SOC := qcom-ipq4029
 749         BLOCKSIZE := 128k
 750         PAGESIZE := 2048
 751         DEVICE_PACKAGES := -swconfig ath10k-firmware-qca9887-ct
 752 endef
 753 TARGET_DEVICES += meraki_mr33
 754
 755 define Device/meraki_mr74
 756         $(call Device/FitImage)
 757         DEVICE_VENDOR := Cisco Meraki
 758         DEVICE_MODEL := MR74
 759         SOC := qcom-ipq4029
 760         BLOCKSIZE := 128k
 761         PAGESIZE := 2048
 762         DEVICE_PACKAGES := -swconfig ath10k-firmware-qca9887-ct
 763         DEVICE_DTS_CONFIG := config@3
 764 endef
 765 TARGET_DEVICES += meraki_mr74
 766
 767 define Device/mobipromo_cm520-79f
 768         $(call Device/FitzImage)
 769         $(call Device/UbiFit)
 770         DEVICE_VENDOR := MobiPromo
 771         DEVICE_MODEL := CM520-79F
 772         SOC := qcom-ipq4019
 773         BLOCKSIZE := 128k
 774         PAGESIZE := 2048
 775         DEVICE_PACKAGES := kmod-usb-ledtrig-usbport
 776 endef
 777 TARGET_DEVICES += mobipromo_cm520-79f
 778
 779 define Device/netgear_ex61x0v2
 780         $(call Device/DniImage)
 781         DEVICE_VENDOR := NETGEAR
 782         DEVICE_DTS_CONFIG := config@4
 783         NETGEAR_BOARD_ID := EX6150v2series
 784         NETGEAR_HW_ID := 29765285+16+0+128+2x2
 785         IMAGE_SIZE := 14400k
 786         SOC := qcom-ipq4018
 787 endef
 788
 789 define Device/netgear_ex6100v2
 790         $(call Device/netgear_ex61x0v2)
 791         DEVICE_MODEL := EX6100
 792         DEVICE_VARIANT := v2
 793 endef
 794 # Missing DSA Setup
 795 #TARGET_DEVICES += netgear_ex6100v2
 796
 797 define Device/netgear_ex6150v2
 798         $(call Device/netgear_ex61x0v2)
 799         DEVICE_MODEL := EX6150
 800         DEVICE_VARIANT := v2
 801 endef
 802 # Missing DSA Setup
 803 #TARGET_DEVICES += netgear_ex6150v2
 804
 805 define Device/netgear_orbi
 806         $(call Device/DniImage)
 807         SOC := qcom-ipq4019
 808         DEVICE_VENDOR := NETGEAR
 809         IMAGE/factory.img := append-kernel | pad-offset 128k 64 | \
 810                 append-uImage-fakehdr filesystem | pad-to $$$$(KERNEL_SIZE) | \
 811                 append-rootfs | pad-rootfs | netgear-dni
 812         IMAGE/sysupgrade.bin/squashfs := append-rootfs | pad-to 64k | \
 813                 sysupgrade-tar rootfs=$$$$@ | append-metadata
 814         DEVICE_PACKAGES := ath10k-firmware-qca9984-ct e2fsprogs kmod-fs-ext4 losetup
 815 endef
 816
 817 define Device/netgear_rbx50
 818         $(call Device/netgear_orbi)
 819         NETGEAR_HW_ID := 29765352+0+4000+512+2x2+2x2+4x4
 820         KERNEL_SIZE := 3932160
 821         ROOTFS_SIZE := 32243712
 822         IMAGE_SIZE := 36175872
 823 endef
 824
 825 define Device/netgear_rbr50
 826         $(call Device/netgear_rbx50)
 827         DEVICE_MODEL := RBR50
 828         DEVICE_VARIANT := v1
 829         NETGEAR_BOARD_ID := RBR50
 830 endef
 831 TARGET_DEVICES += netgear_rbr50
 832
 833 define Device/netgear_rbs50
 834         $(call Device/netgear_rbx50)
 835         DEVICE_MODEL := RBS50
 836         DEVICE_VARIANT := v1
 837         NETGEAR_BOARD_ID := RBS50
 838 endef
 839 TARGET_DEVICES += netgear_rbs50
 840
 841 define Device/netgear_srx60
 842         $(call Device/netgear_orbi)
 843         NETGEAR_HW_ID := 29765352+0+4096+512+2x2+2x2+4x4
 844         KERNEL_SIZE := 3932160
 845         ROOTFS_SIZE := 32243712
 846         IMAGE_SIZE := 36175872
 847 endef
 848
 849 define Device/netgear_srr60
 850         $(call Device/netgear_srx60)
 851         DEVICE_MODEL := SRR60
 852         NETGEAR_BOARD_ID := SRR60
 853 endef
 854 TARGET_DEVICES += netgear_srr60
 855
 856 define Device/netgear_srs60
 857         $(call Device/netgear_srx60)
 858         DEVICE_MODEL := SRS60
 859         NETGEAR_BOARD_ID := SRS60
 860 endef
 861 TARGET_DEVICES += netgear_srs60
 862
 863 define Device/netgear_wac510
 864         $(call Device/FitImage)
 865         $(call Device/UbiFit)
 866         DEVICE_VENDOR := Netgear
 867         DEVICE_MODEL := WAC510
 868         SOC := qcom-ipq4018
 869         DEVICE_DTS_CONFIG := config@5
 870         BLOCKSIZE := 128k
 871         PAGESIZE := 2048
 872         IMAGES += nand-factory.tar
 873         IMAGE/nand-factory.tar := append-ubi | wac5xx-netgear-tar
 874         DEVICE_PACKAGES := uboot-envtools
 875 endef
 876 TARGET_DEVICES += netgear_wac510
 877
 878 define Device/openmesh_a42
 879         $(call Device/FitImageLzma)
 880         DEVICE_VENDOR := OpenMesh
 881         DEVICE_MODEL := A42
 882         SOC := qcom-ipq4018
 883         DEVICE_DTS_CONFIG := config@om.a42
 884         BLOCKSIZE := 64k
 885         KERNEL = kernel-bin | lzma | fit lzma $$(KDIR)/image-$$(DEVICE_DTS).dtb | pad-to $$(BLOCKSIZE)
 886         IMAGE_SIZE := 15616k
 887         IMAGES += factory.bin
 888         IMAGE/factory.bin := append-rootfs | pad-rootfs | openmesh-image ce_type=A42
 889         IMAGE/sysupgrade.bin/squashfs := append-rootfs | pad-rootfs | sysupgrade-tar rootfs=$$$$@ | append-metadata
 890 endef
 891 # Missing DSA Setup
 892 #TARGET_DEVICES += openmesh_a42
 893
 894 define Device/openmesh_a62
 895         $(call Device/FitImageLzma)
 896         DEVICE_VENDOR := OpenMesh
 897         DEVICE_MODEL := A62
 898         SOC := qcom-ipq4019
 899         DEVICE_DTS_CONFIG := config@om.a62
 900         BLOCKSIZE := 64k
 901         KERNEL = kernel-bin | lzma | fit lzma $$(KDIR)/image-$$(DEVICE_DTS).dtb | pad-to $$(BLOCKSIZE)
 902         IMAGE_SIZE := 15552k
 903         IMAGES += factory.bin
 904         IMAGE/factory.bin := append-rootfs | pad-rootfs | openmesh-image ce_type=A62
 905         IMAGE/sysupgrade.bin/squashfs := append-rootfs | pad-rootfs | sysupgrade-tar rootfs=$$$$@ | append-metadata
 906         DEVICE_PACKAGES := ath10k-firmware-qca9888-ct
 907 endef
 908 # Missing DSA Setup
 909 #TARGET_DEVICES += openmesh_a62
 910
 911 define Device/p2w_r619ac
 912         $(call Device/FitzImage)
 913         $(call Device/UbiFit)
 914         DEVICE_VENDOR := P&W
 915         DEVICE_MODEL := R619AC
 916         SOC := qcom-ipq4019
 917         DEVICE_DTS_CONFIG := config@10
 918         BLOCKSIZE := 128k
 919         PAGESIZE := 2048
 920         DEVICE_PACKAGES := ipq-wifi-p2w_r619ac
 921 endef
 922
 923 define Device/p2w_r619ac-64m
 924         $(call Device/p2w_r619ac)
 925         DEVICE_VARIANT := 64M NAND
 926         IMAGES += nand-factory.bin
 927         IMAGE/nand-factory.bin := append-ubi | qsdk-ipq-factory-nand
 928 endef
 929 TARGET_DEVICES += p2w_r619ac-64m
 930
 931 define Device/p2w_r619ac-128m
 932         $(call Device/p2w_r619ac)
 933         DEVICE_VARIANT := 128M NAND
 934 endef
 935 TARGET_DEVICES += p2w_r619ac-128m
 936
 937 define Device/pakedge_wr-1
 938         $(call Device/FitImageLzma)
 939         DEVICE_VENDOR := Pakedge
 940         DEVICE_MODEL := WR-1
 941         DEVICE_DTS_CONFIG := config@ap.dk01.1-c1
 942         DEVICE_PACKAGES := ipq-wifi-pakedge_wr-1
 943         SOC := qcom-ipq4018
 944         BLOCKSIZE := 64k
 945         IMAGE_SIZE := 31232k
 946         IMAGE/sysupgrade.bin := append-kernel | pad-to $$$$(BLOCKSIZE) | append-rootfs | pad-rootfs | append-metadata
 947 endef
 948 TARGET_DEVICES += pakedge_wr-1
 949
 950 define Device/plasmacloud_pa1200
 951         $(call Device/FitImageLzma)
 952         DEVICE_VENDOR := Plasma Cloud
 953         DEVICE_MODEL := PA1200
 954         SOC := qcom-ipq4018
 955         DEVICE_DTS_CONFIG := config@pc.pa1200
 956         BLOCKSIZE := 64k
 957         KERNEL = kernel-bin | lzma | fit lzma $$(KDIR)/image-$$(DEVICE_DTS).dtb | pad-to $$(BLOCKSIZE)
 958         IMAGE_SIZE := 15616k
 959         IMAGES += factory.bin
 960         IMAGE/factory.bin := append-rootfs | pad-rootfs | openmesh-image ce_type=PA1200
 961         IMAGE/sysupgrade.bin/squashfs := append-rootfs | pad-rootfs | sysupgrade-tar rootfs=$$$$@ | append-metadata
 962 endef
 963 # Missing DSA Setup
 964 #TARGET_DEVICES += plasmacloud_pa1200
 965
 966 define Device/plasmacloud_pa2200
 967         $(call Device/FitImageLzma)
 968         DEVICE_VENDOR := Plasma Cloud
 969         DEVICE_MODEL := PA2200
 970         SOC := qcom-ipq4019
 971         DEVICE_DTS_CONFIG := config@pc.pa2200
 972         BLOCKSIZE := 64k
 973         KERNEL = kernel-bin | lzma | fit lzma $$(KDIR)/image-$$(DEVICE_DTS).dtb | pad-to $$(BLOCKSIZE)
 974         IMAGE_SIZE := 15552k
 975         IMAGES += factory.bin
 976         IMAGE/factory.bin := append-rootfs | pad-rootfs | openmesh-image ce_type=PA2200
 977         IMAGE/sysupgrade.bin/squashfs := append-rootfs | pad-rootfs | sysupgrade-tar rootfs=$$$$@ | append-metadata
 978         DEVICE_PACKAGES := ath10k-firmware-qca9888-ct
 979 endef
 980 # Missing DSA Setup
 981 #TARGET_DEVICES += plasmacloud_pa2200
 982
 983 define Device/qcom_ap-dk01.1-c1
 984         DEVICE_VENDOR := Qualcomm Atheros
 985         DEVICE_MODEL := AP-DK01.1
 986         DEVICE_VARIANT := C1
 987         BOARD_NAME := ap-dk01.1-c1
 988         SOC := qcom-ipq4019
 989         DEVICE_DTS := qcom-ipq4019-ap.dk01.1-c1
 990         KERNEL_INSTALL := 1
 991         KERNEL_SIZE := 4096k
 992         IMAGE_SIZE := 26624k
 993         $(call Device/FitImage)
 994         IMAGE/sysupgrade.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-rootfs | pad-rootfs | append-metadata
 995         DEFAULT := n
 996 endef
 997 TARGET_DEVICES += qcom_ap-dk01.1-c1
 998
 999 define Device/qcom_ap-dk04.1-c1
1000         $(call Device/FitImage)
1001         $(call Device/UbiFit)
1002         DEVICE_VENDOR := Qualcomm Atheros
1003         DEVICE_MODEL := AP-DK04.1
1004         DEVICE_VARIANT := C1
1005         SOC := qcom-ipq4019
1006         DEVICE_DTS := qcom-ipq4019-ap.dk04.1-c1
1007         KERNEL_INSTALL := 1
1008         KERNEL_SIZE := 4048k
1009         BLOCKSIZE := 128k
1010         PAGESIZE := 2048
1011         BOARD_NAME := ap-dk04.1-c1
1012         DEFAULT := n
1013 endef
1014 TARGET_DEVICES += qcom_ap-dk04.1-c1
1015
1016 define Device/qxwlan_e2600ac-c1
1017         $(call Device/FitImage)
1018         DEVICE_VENDOR := Qxwlan
1019         DEVICE_MODEL := E2600AC
1020         DEVICE_VARIANT := C1
1021         BOARD_NAME := e2600ac-c1
1022         SOC := qcom-ipq4019
1023         KERNEL_SIZE := 4096k
1024         IMAGE_SIZE := 31232k
1025         IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
1026         DEVICE_PACKAGES := ipq-wifi-qxwlan_e2600ac-c1
1027         DEFAULT := n
1028 endef
1029 # Missing DSA Setup
1030 #TARGET_DEVICES += qxwlan_e2600ac-c1
1031
1032 define Device/qxwlan_e2600ac-c2
1033         $(call Device/FitImage)
1034         $(call Device/UbiFit)
1035         DEVICE_VENDOR := Qxwlan
1036         DEVICE_MODEL := E2600AC
1037         DEVICE_VARIANT := C2
1038         SOC := qcom-ipq4019
1039         KERNEL_INSTALL := 1
1040         BLOCKSIZE := 128k
1041         PAGESIZE := 2048
1042         DEVICE_PACKAGES := ipq-wifi-qxwlan_e2600ac-c2
1043 endef
1044 # Missing DSA Setup
1045 #TARGET_DEVICES += qxwlan_e2600ac-c2
1046
1047 define Device/sony_ncp-hg100-cellular
1048         $(call Device/FitImage)
1049         DEVICE_VENDOR := Sony
1050         DEVICE_MODEL := NCP-HG100/Cellular
1051         DEVICE_DTS_CONFIG := config@ap.dk04.1-c4
1052         SOC := qcom-ipq4019
1053         KERNEL_SIZE := 8192k
1054         IMAGE_SIZE := 128m
1055         DEVICE_PACKAGES := e2fsprogs ipq-wifi-sony_ncp-hg100-cellular \
1056                 kmod-fs-ext4 uqmi
1057 endef
1058 TARGET_DEVICES += sony_ncp-hg100-cellular
1059
1060 define Device/teltonika_rutx10
1061         $(call Device/FitImage)
1062         $(call Device/UbiFit)
1063         DEVICE_VENDOR := Teltonika
1064         DEVICE_MODEL := RUTX10
1065         SOC := qcom-ipq4018
1066         DEVICE_DTS_CONFIG := config@5
1067         KERNEL_INSTALL := 1
1068         BLOCKSIZE := 128k
1069         PAGESIZE := 2048
1070         FILESYSTEMS := squashfs
1071         IMAGE/nand-factory.ubi := append-ubi | qsdk-ipq-factory-nand | append-rutx-metadata
1072         DEVICE_PACKAGES := ipq-wifi-teltonika_rutx kmod-bluetooth
1073 endef
1074 # Missing DSA Setup
1075 #TARGET_DEVICES += teltonika_rutx10
1076
1077 define Device/tel_x1pro
1078         $(call Device/FitImage)
1079         DEVICE_VENDOR := Telco
1080         DEVICE_MODEL := X1 Pro
1081         SOC := qcom-ipq4019
1082         KERNEL_SIZE := 4096k
1083         IMAGE_SIZE := 31232k
1084         IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
1085         DEVICE_PACKAGES := kmod-usb-net-qmi-wwan kmod-usb-serial-option uqmi
1086         DEFAULT := n
1087 endef
1088 # Missing DSA Setup
1089 #TARGET_DEVICES += tel_x1pro
1090
1091 define Device/unielec_u4019-32m
1092         $(call Device/FitImage)
1093         DEVICE_VENDOR := Unielec
1094         DEVICE_MODEL := U4019
1095         DEVICE_VARIANT := 32M
1096         BOARD_NAME := u4019-32m
1097         SOC := qcom-ipq4019
1098         KERNEL_SIZE := 4096k
1099         IMAGE_SIZE := 31232k
1100         IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
1101         DEFAULT := n
1102 endef
1103 # Missing DSA Setup
1104 #TARGET_DEVICES += unielec_u4019-32m
1105
1106 define Device/zte_mf28x_common
1107         $(call Device/FitzImage)
1108         DEVICE_VENDOR := ZTE
1109         SOC := qcom-ipq4019
1110         DEVICE_DTS_CONFIG := config@ap.dk04.1-c1
1111         BLOCKSIZE := 128k
1112         PAGESIZE := 2048
1113         KERNEL_IN_UBI := 1
1114         DEVICE_PACKAGES := kmod-usb-net-qmi-wwan kmod-usb-serial-option uqmi
1115 endef
1116
1117 define Device/zte_mf286d
1118         $(call Device/zte_mf28x_common)
1119         DEVICE_MODEL := MF286D
1120 endef
1121 TARGET_DEVICES += zte_mf286d
1122
1123 define Device/zte_mf289f
1124         $(call Device/zte_mf28x_common)
1125         DEVICE_MODEL := MF289F
1126         DEVICE_PACKAGES += ipq-wifi-zte_mf289f ath10k-firmware-qca9984-ct
1127 endef
1128 TARGET_DEVICES += zte_mf289f
1129
1130 define Device/zyxel_nbg6617
1131         $(call Device/FitImageLzma)
1132         DEVICE_VENDOR := ZyXEL
1133         DEVICE_MODEL := NBG6617
1134         SOC := qcom-ipq4018
1135         KERNEL_SIZE := 4096k
1136         ROOTFS_SIZE := 24960k
1137         RAS_BOARD := NBG6617
1138         RAS_ROOTFS_SIZE := 19840k
1139         RAS_VERSION := "$(VERSION_DIST) $(REVISION)"
1140         IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
1141         IMAGES += factory.bin
1142 #       The ZyXEL firmware allows flashing thru the web-gui only when the rootfs is
1143 #       at least as large as the one of the initial firmware image (not the current
1144 #       one on the device). This only applies to the Web-UI, the bootlaoder ignores
1145 #       this minimum-size. However, the larger image can be flashed both ways.
1146         IMAGE/factory.bin := append-rootfs | pad-rootfs | pad-to 64k | check-size $$$$(ROOTFS_SIZE) | zyxel-ras-image separate-kernel
1147         IMAGE/sysupgrade.bin/squashfs := append-rootfs | pad-rootfs | check-size $$$$(ROOTFS_SIZE) | sysupgrade-tar rootfs=$$$$@ | append-metadata
1148         DEVICE_PACKAGES := kmod-usb-ledtrig-usbport
1149 endef
1150 TARGET_DEVICES += zyxel_nbg6617
1151
1152 define Device/zyxel_wre6606
1153         $(call Device/FitImage)
1154         DEVICE_VENDOR := ZyXEL
1155         DEVICE_MODEL := WRE6606
1156         DEVICE_DTS_CONFIG := config@4
1157         SOC := qcom-ipq4018
1158         IMAGE_SIZE := 13184k
1159         IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | check-size | append-metadata
1160         DEVICE_PACKAGES := -kmod-ath10k-ct kmod-ath10k-ct-smallbuffers
1161 endef
1162 # Missing DSA Setup
1163 #TARGET_DEVICES += zyxel_wre6606