target/linux/ipq40xx/image/generic.mk

   1
   2 DEVICE_VARS += NETGEAR_BOARD_ID NETGEAR_HW_ID
   3 DEVICE_VARS += RAS_BOARD RAS_ROOTFS_SIZE RAS_VERSION
   4 DEVICE_VARS += WRGG_DEVNAME WRGG_SIGNATURE
   5
   6 define Device/FitImage
   7         KERNEL_SUFFIX := -fit-uImage.itb
   8         KERNEL = kernel-bin | gzip | fit gzip $$(DTS_DIR)/$$(DEVICE_DTS).dtb
   9         KERNEL_NAME := Image
  10 endef
  11
  12 define Device/FitImageLzma
  13         KERNEL_SUFFIX := -fit-uImage.itb
  14         KERNEL = kernel-bin | lzma | fit lzma $$(DTS_DIR)/$$(DEVICE_DTS).dtb
  15         KERNEL_NAME := Image
  16 endef
  17
  18 define Device/FitzImage
  19         KERNEL_SUFFIX := -fit-zImage.itb
  20         KERNEL = kernel-bin | fit none $$(DTS_DIR)/$$(DEVICE_DTS).dtb
  21         KERNEL_NAME := zImage
  22 endef
  23
  24 define Device/UbiFit
  25         KERNEL_IN_UBI := 1
  26         IMAGES := nand-factory.ubi nand-sysupgrade.bin
  27         IMAGE/nand-factory.ubi := append-ubi
  28         IMAGE/nand-sysupgrade.bin := sysupgrade-tar | append-metadata
  29 endef
  30
  31 define Device/DniImage
  32         $(call Device/FitzImage)
  33         NETGEAR_BOARD_ID :=
  34         NETGEAR_HW_ID :=
  35         IMAGES += factory.img
  36         IMAGE/factory.img := append-kernel | pad-offset 64k 64 | append-uImage-fakehdr filesystem | append-rootfs | pad-rootfs | netgear-dni
  37         IMAGE/sysupgrade.bin := append-kernel | pad-offset 64k 64 | append-uImage-fakehdr filesystem | \
  38                 append-rootfs | pad-rootfs | check-size | append-metadata
  39 endef
  40
  41 define Build/append-rootfshdr
  42         mkimage -A $(LINUX_KARCH) \
  43                 -O linux -T filesystem \
  44                 -C lzma -a $(KERNEL_LOADADDR) -e $(if $(KERNEL_ENTRY),$(KERNEL_ENTRY),$(KERNEL_LOADADDR)) \
  45                 -n root.squashfs -d $(IMAGE_ROOTFS) $@.new
  46         dd if=$@.new bs=64 count=1 >> $(IMAGE_KERNEL)
  47 endef
  48
  49 define Build/mkmylofw_32m
  50         $(eval device_id=$(word 1,$(1)))
  51         $(eval revision=$(word 2,$(1)))
  52
  53         let \
  54                 size="$$(stat -c%s $@)" \
  55                 pad="$(subst k,* 1024,$(BLOCKSIZE))" \
  56                 pad="(pad - (size % pad)) % pad" \
  57                 newsize='size + pad'; \
  58                 $(STAGING_DIR_HOST)/bin/mkmylofw \
  59                 -B WPE72 -i 0x11f6:$(device_id):0x11f6:$(device_id) -r $(revision) \
  60                 -s 0x2000000 -p0x180000:$$newsize:al:0x80208000:"OpenWrt":$@ \
  61                 $@.new
  62         @mv $@.new $@
  63 endef
  64
  65 define Build/wac5xx-netgear-tar
  66         mkdir $@.tmp
  67         mv $@ $@.tmp/wac5xx-ubifs-root.img
  68         md5sum $@.tmp/wac5xx-ubifs-root.img > $@.tmp/wac5xx-ubifs-root.md5sum
  69         echo "WAC505 WAC510" > $@.tmp/metadata.txt
  70         echo "WAC505_V9.9.9.9" > $@.tmp/version
  71         tar -C $@.tmp/ -cf $@ .
  72         rm -rf $@.tmp
  73 endef
  74
  75 define Build/qsdk-ipq-factory-nand-askey
  76         $(TOPDIR)/scripts/mkits-qsdk-ipq-image.sh $@.its\
  77                 askey_kernel $(IMAGE_KERNEL) \
  78                 askey_fs $(IMAGE_ROOTFS) \
  79                 ubifs $@
  80         PATH=$(LINUX_DIR)/scripts/dtc:$(PATH) mkimage -f $@.its $@.new
  81         @mv $@.new $@
  82 endef
  83
  84 define Build/SenaoFW
  85         -$(STAGING_DIR_HOST)/bin/mksenaofw \
  86                 -n $(BOARD_NAME) -r $(VENDOR_ID) -p $(1) \
  87                 -c $(DATECODE) -w $(2) -x $(CW_VER) -t 0 \
  88                 -e $@ \
  89                 -o $@.new
  90         @cp $@.new $@
  91 endef
  92
  93 define Build/wrgg-image
  94         mkwrggimg -i $@ \
  95         -o $@.new \
  96         -d "$(WRGG_DEVNAME)" \
  97         -s "$(WRGG_SIGNATURE)" \
  98         -v "" -m "" -B ""
  99         mv $@.new $@
 100 endef
 101
 102 define Device/8dev_habanero-dvk
 103         $(call Device/FitImageLzma)
 104         DEVICE_VENDOR := 8devices
 105         DEVICE_MODEL := Habanero DVK
 106         IMAGE_SIZE := 30976k
 107         SOC := qcom-ipq4019
 108         DEVICE_PACKAGES := ipq-wifi-8dev_habanero-dvk
 109         IMAGE/sysupgrade.bin := append-kernel | pad-to 64k | append-rootfs | pad-rootfs | check-size | append-metadata
 110 endef
 111 TARGET_DEVICES += 8dev_habanero-dvk
 112
 113 define Device/8dev_jalapeno-common
 114         $(call Device/FitImage)
 115         $(call Device/UbiFit)
 116         BLOCKSIZE := 128k
 117         PAGESIZE := 2048
 118         SOC := qcom-ipq4018
 119 endef
 120
 121 define Device/8dev_jalapeno
 122         $(call Device/8dev_jalapeno-common)
 123         DEVICE_VENDOR := 8devices
 124         DEVICE_MODEL := Jalapeno
 125 endef
 126 TARGET_DEVICES += 8dev_jalapeno
 127
 128 define Device/alfa-network_ap120c-ac
 129         $(call Device/FitImage)
 130         $(call Device/UbiFit)
 131         DEVICE_VENDOR := ALFA Network
 132         DEVICE_MODEL := AP120C-AC
 133         SOC := qcom-ipq4018
 134         DEVICE_PACKAGES := kmod-usb-acm kmod-tpm-i2c-atmel
 135         BLOCKSIZE := 128k
 136         PAGESIZE := 2048
 137         IMAGE_SIZE := 65536k
 138         IMAGES := nand-factory.bin nand-sysupgrade.bin
 139         IMAGE/nand-factory.bin := append-ubi | qsdk-ipq-factory-nand
 140 endef
 141 TARGET_DEVICES += alfa-network_ap120c-ac
 142
 143 define Device/aruba_glenmorangie
 144         $(call Device/FitImageLzma)
 145         DEVICE_VENDOR := Aruba
 146         SOC := qcom-ipq4029
 147         DEVICE_PACKAGES := ipq-wifi-aruba_ap-303
 148 endef
 149
 150 define Device/aruba_ap-303
 151         $(call Device/aruba_glenmorangie)
 152         DEVICE_MODEL := AP-303
 153 endef
 154 TARGET_DEVICES += aruba_ap-303
 155
 156 define Device/aruba_ap-303h
 157         $(call Device/aruba_glenmorangie)
 158         DEVICE_MODEL := AP-303H
 159 endef
 160 TARGET_DEVICES += aruba_ap-303h
 161
 162 define Device/aruba_ap-365
 163         $(call Device/aruba_glenmorangie)
 164         DEVICE_MODEL := AP-365
 165         DEVICE_PACKAGES += kmod-hwmon-ad7418
 166 endef
 167 TARGET_DEVICES += aruba_ap-365
 168
 169 define Device/asus_map-ac2200
 170         $(call Device/FitImageLzma)
 171         DEVICE_VENDOR := ASUS
 172         DEVICE_MODEL := Lyra (MAP-AC2200)
 173         SOC := qcom-ipq4019
 174         DEVICE_PACKAGES := ath10k-firmware-qca9888-ct kmod-ath3k
 175 endef
 176 TARGET_DEVICES += asus_map-ac2200
 177
 178 define Device/asus_rt-ac58u
 179         $(call Device/FitImageLzma)
 180         DEVICE_VENDOR := ASUS
 181         DEVICE_MODEL := RT-AC58U
 182         SOC := qcom-ipq4018
 183         BLOCKSIZE := 128k
 184         PAGESIZE := 2048
 185         DTB_SIZE := 65536
 186         IMAGE_SIZE := 20439364
 187         FILESYSTEMS := squashfs
 188 #       Someone - in their infinite wisdom - decided to put the firmware
 189 #       version in front of the image name \03\00\00\04 => Version 3.0.0.4
 190 #       Since u-boot works with strings we either need another fixup step
 191 #       to add a version... or we are very careful not to add '\0' into that
 192 #       string and call it a day.... Yeah, we do the latter!
 193         UIMAGE_NAME:=$(shell echo -e '\03\01\01\01RT-AC58U')
 194         DEVICE_PACKAGES := -kmod-ath10k-ct kmod-ath10k-ct-smallbuffers \
 195                 kmod-usb-ledtrig-usbport
 196 endef
 197 TARGET_DEVICES += asus_rt-ac58u
 198
 199 define Device/avm_fritzbox-4040
 200         $(call Device/FitImageLzma)
 201         DEVICE_VENDOR := AVM
 202         DEVICE_MODEL := FRITZ!Box 4040
 203         SOC := qcom-ipq4018
 204         BOARD_NAME := fritz4040
 205         IMAGE_SIZE := 29056k
 206         UBOOT_PATH := $(STAGING_DIR_IMAGE)/uboot-fritz4040.bin
 207         UBOOT_PARTITION_SIZE := 524288
 208         IMAGES += eva.bin
 209         IMAGE/eva.bin := append-uboot | pad-to $$$$(UBOOT_PARTITION_SIZE) | append-kernel | append-rootfs | pad-rootfs
 210         IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | check-size | append-metadata
 211         DEVICE_PACKAGES := fritz-tffs fritz-caldata
 212 endef
 213 TARGET_DEVICES += avm_fritzbox-4040
 214
 215 define Device/avm_fritzbox-7530
 216         $(call Device/FitImageLzma)
 217         DEVICE_VENDOR := AVM
 218         DEVICE_MODEL := FRITZ!Box 7530
 219         SOC := qcom-ipq4019
 220         DEVICE_PACKAGES := fritz-caldata fritz-tffs-nand
 221 endef
 222 TARGET_DEVICES += avm_fritzbox-7530
 223
 224 define Device/avm_fritzrepeater-1200
 225         $(call Device/FitImageLzma)
 226         DEVICE_VENDOR := AVM
 227         DEVICE_MODEL := FRITZ!Repeater 1200
 228         SOC := qcom-ipq4019
 229         DEVICE_PACKAGES := fritz-caldata fritz-tffs-nand ipq-wifi-avm_fritzrepeater-1200
 230 endef
 231 TARGET_DEVICES += avm_fritzrepeater-1200
 232
 233 define Device/avm_fritzrepeater-3000
 234         $(call Device/FitImageLzma)
 235         DEVICE_VENDOR := AVM
 236         DEVICE_MODEL := FRITZ!Repeater 3000
 237         SOC := qcom-ipq4019
 238         DEVICE_PACKAGES := ath10k-firmware-qca9984-ct fritz-caldata fritz-tffs-nand
 239 endef
 240 TARGET_DEVICES += avm_fritzrepeater-3000
 241
 242 define Device/buffalo_wtr-m2133hp
 243         $(call Device/FitImage)
 244         $(call Device/UbiFit)
 245         DEVICE_VENDOR := Buffalo
 246         DEVICE_MODEL := WTR-M2133HP
 247         SOC := qcom-ipq4019
 248         DEVICE_PACKAGES := ath10k-firmware-qca9984-ct ipq-wifi-buffalo_wtr-m2133hp
 249         BLOCKSIZE := 128k
 250         PAGESIZE := 2048
 251 endef
 252 TARGET_DEVICES += buffalo_wtr-m2133hp
 253
 254 define Device/cellc_rtl30vw
 255         KERNEL_SUFFIX := -fit-uImage.itb
 256         KERNEL_INITRAMFS = kernel-bin | gzip | fit gzip $$(DTS_DIR)/$$(DEVICE_DTS).dtb
 257         KERNEL = kernel-bin | gzip | fit gzip $$(DTS_DIR)/$$(DEVICE_DTS).dtb | uImage lzma | pad-to 2048
 258         KERNEL_NAME := Image
 259         KERNEL_IN_UBI :=
 260         IMAGES := nand-factory.bin nand-sysupgrade.bin
 261         IMAGE/nand-factory.bin := append-rootfshdr | append-ubi | qsdk-ipq-factory-nand-askey
 262         IMAGE/nand-sysupgrade.bin := append-rootfshdr | sysupgrade-tar | append-metadata
 263         DEVICE_VENDOR := Cell C
 264         DEVICE_MODEL := RTL30VW
 265         SOC := qcom-ipq4019
 266         DEVICE_DTS_CONFIG := config@5
 267         KERNEL_INSTALL := 1
 268         KERNEL_SIZE := 4096k
 269         IMAGE_SIZE := 57344k
 270         BLOCKSIZE := 128k
 271         PAGESIZE := 2048
 272         DEVICE_PACKAGES := kmod-usb-net-qmi-wwan kmod-usb-serial-option uqmi ipq-wifi-cellc_rtl30vw
 273 endef
 274 TARGET_DEVICES += cellc_rtl30vw
 275
 276 define Device/cilab_meshpoint-one
 277         $(call Device/8dev_jalapeno-common)
 278         DEVICE_VENDOR := Crisis Innovation Lab
 279         DEVICE_MODEL := MeshPoint.One
 280         DEVICE_PACKAGES := kmod-i2c-gpio kmod-iio-bmp280-i2c kmod-hwmon-ina2xx kmod-rtc-pcf2127
 281 endef
 282 TARGET_DEVICES += cilab_meshpoint-one
 283
 284 define Device/compex_wpj419
 285         $(call Device/FitImage)
 286         $(call Device/UbiFit)
 287         DEVICE_VENDOR := Compex
 288         DEVICE_MODEL := WPJ419
 289         SOC := qcom-ipq4019
 290         DEVICE_DTS_CONFIG := config@12
 291         KERNEL_INSTALL := 1
 292         BLOCKSIZE := 128k
 293         PAGESIZE := 2048
 294         FILESYSTEMS := squashfs
 295 endef
 296 TARGET_DEVICES += compex_wpj419
 297
 298 define Device/compex_wpj428
 299         $(call Device/FitImage)
 300         DEVICE_VENDOR := Compex
 301         DEVICE_MODEL := WPJ428
 302         SOC := qcom-ipq4028
 303         DEVICE_DTS_CONFIG := config@4
 304         BLOCKSIZE := 64k
 305         IMAGE_SIZE := 31232k
 306         KERNEL_SIZE := 4096k
 307         IMAGES += cpximg-6a04.bin
 308         IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
 309         IMAGE/cpximg-6a04.bin := append-kernel | append-rootfs | pad-rootfs | mkmylofw_32m 0x8A2 3
 310         DEVICE_PACKAGES := kmod-gpio-beeper
 311 endef
 312 TARGET_DEVICES += compex_wpj428
 313
 314 define Device/devolo_magic-2-wifi-next
 315         $(call Device/FitImage)
 316         DEVICE_VENDOR := devolo
 317         DEVICE_MODEL := Magic 2 WiFi next
 318         SOC := qcom-ipq4018
 319         KERNEL_SIZE := 4096k
 320
 321         # If the bootloader sees 0xDEADC0DE and this trailer at the 64k boundary of a TFTP image
 322         # it will bootm it, just like we want for the initramfs.
 323         KERNEL_INITRAMFS := kernel-bin | gzip | fit gzip $$(DTS_DIR)/$$(DEVICE_DTS).dtb | pad-to 64k |\
 324                 append-string -e '\xDE\xAD\xC0\xDE{"fl_initramfs":""}\x00'
 325
 326         IMAGE_SIZE := 26624k
 327         IMAGES := sysupgrade.bin
 328         IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
 329         DEVICE_PACKAGES := ipq-wifi-devolo_magic-2-wifi-next
 330 endef
 331 TARGET_DEVICES += devolo_magic-2-wifi-next
 332
 333 define Device/dlink_dap-2610
 334         $(call Device/FitImageLzma)
 335         DEVICE_VENDOR := D-Link
 336         DEVICE_MODEL := DAP-2610
 337         SOC := qcom-ipq4018
 338         DEVICE_DTS_CONFIG := config@ap.dk01.1-c1
 339         BLOCKSIZE := 64k
 340         WRGG_DEVNAME := /dev/mtdblock/8
 341         WRGG_SIGNATURE := wapac30_dkbs_dap2610
 342         IMAGE_SIZE := 14080k
 343         IMAGES += factory.bin
 344         # Bootloader expects a special 160 byte header which is added by
 345         # wrgg-image.
 346         # Factory image size must be larger than 6MB, and size in wrgg header must
 347         # match actual factory image size to be flashable from D-Link http server.
 348         # Bootloader verifies checksum of wrgg image before booting, thus jffs2
 349         # cannot be part of the wrgg image. This is solved in the factory image by
 350         # having the rootfs at the end of the image (without pad-rootfs). And in
 351         # the sysupgrade image only the kernel is included in the wrgg checksum,
 352         # but this is not flashable from the D-link http server.
 353         # append-rootfs must start on an erase block boundary.
 354         IMAGE/factory.bin    := append-kernel | pad-offset 6144k 160 | append-rootfs | wrgg-image | check-size
 355         IMAGE/sysupgrade.bin := append-kernel | wrgg-image | pad-to $$$$(BLOCKSIZE) | append-rootfs | pad-rootfs | check-size | append-metadata
 356         DEVICE_PACKAGES := ipq-wifi-dlink_dap2610
 357 endef
 358 TARGET_DEVICES += dlink_dap-2610
 359
 360 define Device/edgecore_ecw5211
 361         $(call Device/FitImage)
 362         $(call Device/UbiFit)
 363         DEVICE_VENDOR := Edgecore
 364         DEVICE_MODEL := ECW5211
 365         SOC := qcom-ipq4018
 366         BLOCKSIZE := 128k
 367         PAGESIZE := 2048
 368         DEVICE_DTS_CONFIG := config@ap.dk01.1-c2
 369         DEVICE_PACKAGES := kmod-tpm-i2c-atmel kmod-usb-acm
 370 endef
 371 TARGET_DEVICES += edgecore_ecw5211
 372
 373 define Device/edgecore_oap100
 374         $(call Device/FitImage)
 375         $(call Device/UbiFit)
 376         DEVICE_VENDOR := Edgecore
 377         DEVICE_MODEL := OAP100
 378         SOC := qcom-ipq4019
 379         BLOCKSIZE := 128k
 380         PAGESIZE := 2048
 381         IMAGES := nand-sysupgrade.bin
 382         DEVICE_DTS_CONFIG := config@ap.dk07.1-c1
 383         DEVICE_PACKAGES := ipq-wifi-edgecore_oap100 kmod-usb-acm kmod-usb-net kmod-usb-net-cdc-qmi uqmi
 384 endef
 385 TARGET_DEVICES += edgecore_oap100
 386
 387 define Device/engenius_eap1300
 388         $(call Device/FitImage)
 389         DEVICE_VENDOR := EnGenius
 390         DEVICE_MODEL := EAP1300
 391         DEVICE_DTS_CONFIG := config@4
 392         BOARD_NAME := eap1300
 393         SOC := qcom-ipq4018
 394         KERNEL_SIZE := 5120k
 395         IMAGE_SIZE := 25344k
 396         IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
 397 endef
 398 TARGET_DEVICES += engenius_eap1300
 399
 400 define Device/engenius_eap2200
 401         $(call Device/FitImage)
 402         $(call Device/UbiFit)
 403         DEVICE_VENDOR := EnGenius
 404         DEVICE_MODEL := EAP2200
 405         SOC := qcom-ipq4019
 406         BLOCKSIZE := 128k
 407         PAGESIZE := 2048
 408         DEVICE_PACKAGES := ath10k-firmware-qca9888-ct ipq-wifi-engenius_eap2200 -kmod-ath10k-ct kmod-ath10k-ct-smallbuffers
 409 endef
 410 TARGET_DEVICES += engenius_eap2200
 411
 412 define Device/engenius_emd1
 413         $(call Device/FitImage)
 414         DEVICE_VENDOR := EnGenius
 415         DEVICE_MODEL := EMD1
 416         DEVICE_DTS_CONFIG := config@4
 417         SOC := qcom-ipq4018
 418         IMAGE_SIZE := 30720k
 419         IMAGES += factory.bin
 420         IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
 421         IMAGE/factory.bin := qsdk-ipq-factory-nor | check-size
 422         DEVICE_PACKAGES := ipq-wifi-engenius_emd1
 423 endef
 424 TARGET_DEVICES += engenius_emd1
 425
 426 define Device/engenius_emr3500
 427         $(call Device/FitImage)
 428         DEVICE_VENDOR := EnGenius
 429         DEVICE_MODEL := EMR3500
 430         DEVICE_DTS_CONFIG := config@4
 431         SOC := qcom-ipq4018
 432         KERNEL_SIZE := 4096k
 433         IMAGE_SIZE := 30720k
 434         IMAGES += factory.bin
 435         IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
 436         IMAGE/factory.bin := qsdk-ipq-factory-nor | check-size
 437 endef
 438 TARGET_DEVICES += engenius_emr3500
 439
 440 define Device/engenius_ens620ext
 441         $(call Device/FitImage)
 442         DEVICE_VENDOR := EnGenius
 443         DEVICE_MODEL := ENS620EXT
 444         SOC := qcom-ipq4018
 445         DEVICE_DTS_CONFIG := config@4
 446         BLOCKSIZE := 64k
 447         PAGESIZE := 256
 448         BOARD_NAME := ENS620EXT
 449         VENDOR_ID := 0x0101
 450         PRODUCT_ID := 0x79
 451         PRODUCT_ID_NEW := 0xA4
 452         DATECODE := 190507
 453         FW_VER := 3.1.2
 454         FW_VER_NEW := 3.5.6
 455         CW_VER := 1.8.99
 456         IMAGE_SIZE := 21312k
 457         KERNEL_SIZE := 5120k
 458         FILESYSTEMS := squashfs
 459         IMAGES += factory_30.bin factory_35.bin
 460         IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | check-size | append-metadata
 461         IMAGE/factory_30.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-rootfs | pad-rootfs | check-size | SenaoFW $$$$(PRODUCT_ID) $$$$(FW_VER)
 462         IMAGE/factory_35.bin := qsdk-ipq-factory-nor | check-size | SenaoFW $$$$(PRODUCT_ID_NEW) $$$$(FW_VER_NEW)
 463 endef
 464 TARGET_DEVICES += engenius_ens620ext
 465
 466 define Device/ezviz_cs-w3-wd1200g-eup
 467         $(call Device/FitImage)
 468         DEVICE_VENDOR := EZVIZ
 469         DEVICE_MODEL := CS-W3-WD1200G
 470         DEVICE_VARIANT := EUP
 471         DEVICE_DTS_CONFIG := config@4
 472         IMAGE_SIZE := 14848k
 473         SOC := qcom-ipq4018
 474         IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | \
 475                 append-metadata
 476         DEVICE_PACKAGES := -kmod-ath10k-ct kmod-ath10k-ct-smallbuffers \
 477                 ipq-wifi-ezviz_cs-w3-wd1200g-eup
 478 endef
 479 TARGET_DEVICES += ezviz_cs-w3-wd1200g-eup
 480
 481 define Device/glinet_gl-ap1300
 482         $(call Device/FitImage)
 483         $(call Device/UbiFit)
 484         DEVICE_VENDOR := GL.iNet
 485         DEVICE_MODEL := GL-AP1300
 486         SOC := qcom-ipq4018
 487         DEVICE_DTS_CONFIG := config@ap.dk01.1-c2
 488         BLOCKSIZE := 128k
 489         PAGESIZE := 2048
 490         IMAGE_SIZE := 131072k
 491         KERNEL_INSTALL := 1
 492         DEVICE_PACKAGES := ipq-wifi-glinet_gl-ap1300
 493 endef
 494 TARGET_DEVICES += glinet_gl-ap1300
 495
 496 define Device/glinet_gl-b1300
 497         $(call Device/FitImage)
 498         DEVICE_VENDOR := GL.iNet
 499         DEVICE_MODEL := GL-B1300
 500         BOARD_NAME := gl-b1300
 501         SOC := qcom-ipq4029
 502         KERNEL_SIZE := 4096k
 503         IMAGE_SIZE := 26624k
 504         IMAGE/sysupgrade.bin := append-kernel |append-rootfs | pad-rootfs | append-metadata
 505 endef
 506 TARGET_DEVICES += glinet_gl-b1300
 507
 508 define Device/glinet_gl-s1300
 509         $(call Device/FitImage)
 510         DEVICE_VENDOR := GL.iNet
 511         DEVICE_MODEL := GL-S1300
 512         SOC := qcom-ipq4029
 513         KERNEL_SIZE := 4096k
 514         IMAGE_SIZE := 26624k
 515         IMAGES := sysupgrade.bin
 516         IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
 517         DEVICE_PACKAGES := ipq-wifi-glinet_gl-s1300 kmod-fs-ext4 kmod-mmc kmod-spi-dev
 518 endef
 519 TARGET_DEVICES += glinet_gl-s1300
 520
 521 define Device/linksys_ea6350v3
 522         # The Linksys EA6350v3 has a uboot bootloader that does not
 523         # support either booting lzma kernel images nor booting UBI
 524         # partitions. This uboot, however, supports raw kernel images and
 525         # gzipped images.
 526         #
 527         # As for the time of writing this, the device will boot the kernel
 528         # from a fixed address with a fixed length of 3MiB. Also, the
 529         # device has a hard-coded kernel command line that requieres the
 530         # rootfs and alt_rootfs to be in mtd11 and mtd13 respectively.
 531         # Oh... and the kernel partition overlaps with the rootfs
 532         # partition (the same for alt_kernel and alt_rootfs).
 533         #
 534         # If you are planing re-partitioning the device, you may want to
 535         # keep those details in mind:
 536         # 1. The kernel adresses you should honor are 0x00000000 and
 537         #    0x02800000 respectively.
 538         # 2. The kernel size (plus the dtb) cannot exceed 3.00MiB in size.
 539         # 3. You can use 'zImage', but not a raw 'Image' packed with lzma.
 540         # 4. The kernel command line from uboot is harcoded to boot with
 541         #    rootfs either in mtd11 or mtd13.
 542         $(call Device/FitzImage)
 543         DEVICE_VENDOR := Linksys
 544         DEVICE_MODEL := EA6350
 545         DEVICE_VARIANT := v3
 546         SOC := qcom-ipq4018
 547         BLOCKSIZE := 128k
 548         PAGESIZE := 2048
 549         KERNEL_SIZE := 3072k
 550         IMAGE_SIZE := 37888k
 551         UBINIZE_OPTS := -E 5
 552         IMAGES += factory.bin
 553         IMAGE/factory.bin := append-kernel | append-uImage-fakehdr filesystem | pad-to $$$$(KERNEL_SIZE) | append-ubi | linksys-image type=EA6350v3
 554 endef
 555 TARGET_DEVICES += linksys_ea6350v3
 556
 557 define Device/linksys_ea8300
 558         $(call Device/FitzImage)
 559         DEVICE_VENDOR := Linksys
 560         DEVICE_MODEL := EA8300
 561         SOC := qcom-ipq4019
 562         KERNEL_SIZE := 3072k
 563         IMAGE_SIZE := 87040k
 564         BLOCKSIZE := 128k
 565         PAGESIZE := 2048
 566         UBINIZE_OPTS := -E 5    # EOD marks to "hide" factory sig at EOF
 567         IMAGES += factory.bin
 568         IMAGE/factory.bin  := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-ubi | linksys-image type=EA8300
 569         DEVICE_PACKAGES := ath10k-firmware-qca9888-ct ipq-wifi-linksys_ea8300 kmod-usb-ledtrig-usbport
 570 endef
 571 TARGET_DEVICES += linksys_ea8300
 572
 573 define Device/linksys_mr8300
 574         $(call Device/FitzImage)
 575         DEVICE_VENDOR := Linksys
 576         DEVICE_MODEL := MR8300
 577         SOC := qcom-ipq4019
 578         KERNEL_SIZE := 3072k
 579         IMAGE_SIZE := 87040k
 580         BLOCKSIZE := 128k
 581         PAGESIZE := 2048
 582         UBINIZE_OPTS := -E 5    # EOD marks to "hide" factory sig at EOF
 583         IMAGES += factory.bin
 584         IMAGE/factory.bin  := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-ubi | linksys-image type=MR8300
 585         DEVICE_PACKAGES := ath10k-firmware-qca9888-ct ipq-wifi-linksys_mr8300-v0 kmod-usb-ledtrig-usbport
 586 endef
 587 TARGET_DEVICES += linksys_mr8300
 588
 589 define Device/luma_wrtq-329acn
 590         $(call Device/FitImage)
 591         DEVICE_VENDOR := Luma Home
 592         DEVICE_MODEL := WRTQ-329ACN
 593         SOC := qcom-ipq4018
 594         DEVICE_PACKAGES := ipq-wifi-luma_wrtq-329acn kmod-ath3k kmod-eeprom-at24 kmod-i2c-gpio
 595         IMAGE_SIZE := 76632k
 596         BLOCKSIZE := 128k
 597         PAGESIZE := 2048
 598 endef
 599 TARGET_DEVICES += luma_wrtq-329acn
 600
 601 define Device/meraki_mr33
 602         $(call Device/FitImage)
 603         DEVICE_VENDOR := Cisco Meraki
 604         DEVICE_MODEL := MR33
 605         SOC := qcom-ipq4029
 606         BLOCKSIZE := 128k
 607         PAGESIZE := 2048
 608         DEVICE_PACKAGES := -swconfig ath10k-firmware-qca9887-ct
 609 endef
 610 TARGET_DEVICES += meraki_mr33
 611
 612 define Device/mobipromo_cm520-79f
 613         $(call Device/FitzImage)
 614         $(call Device/UbiFit)
 615         DEVICE_VENDOR := MobiPromo
 616         DEVICE_MODEL := CM520-79F
 617         SOC := qcom-ipq4019
 618         BLOCKSIZE := 128k
 619         PAGESIZE := 2048
 620         DEVICE_PACKAGES := ipq-wifi-mobipromo_cm520-79f kmod-usb-ledtrig-usbport
 621 endef
 622 TARGET_DEVICES += mobipromo_cm520-79f
 623
 624 define Device/netgear_ex61x0v2
 625         $(call Device/DniImage)
 626         DEVICE_VENDOR := NETGEAR
 627         DEVICE_DTS_CONFIG := config@4
 628         NETGEAR_BOARD_ID := EX6150v2series
 629         NETGEAR_HW_ID := 29765285+16+0+128+2x2
 630         IMAGE_SIZE := 14400k
 631         SOC := qcom-ipq4018
 632 endef
 633
 634 define Device/netgear_ex6100v2
 635         $(call Device/netgear_ex61x0v2)
 636         DEVICE_MODEL := EX6100
 637         DEVICE_VARIANT := v2
 638 endef
 639 TARGET_DEVICES += netgear_ex6100v2
 640
 641 define Device/netgear_ex6150v2
 642         $(call Device/netgear_ex61x0v2)
 643         DEVICE_MODEL := EX6150
 644         DEVICE_VARIANT := v2
 645 endef
 646 TARGET_DEVICES += netgear_ex6150v2
 647
 648 define Device/netgear_wac510
 649         $(call Device/FitImage)
 650         $(call Device/UbiFit)
 651         DEVICE_VENDOR := Netgear
 652         DEVICE_MODEL := WAC510
 653         SOC := qcom-ipq4018
 654         DEVICE_DTS_CONFIG := config@5
 655         BLOCKSIZE := 128k
 656         PAGESIZE := 2048
 657         IMAGES += nand-factory.tar
 658         IMAGE/nand-factory.tar := append-ubi | wac5xx-netgear-tar
 659         DEVICE_PACKAGES := uboot-envtools
 660 endef
 661 TARGET_DEVICES += netgear_wac510
 662
 663 define Device/openmesh_a42
 664         $(call Device/FitImageLzma)
 665         DEVICE_VENDOR := OpenMesh
 666         DEVICE_MODEL := A42
 667         SOC := qcom-ipq4018
 668         DEVICE_DTS_CONFIG := config@om.a42
 669         BLOCKSIZE := 64k
 670         KERNEL = kernel-bin | lzma | fit lzma $$(DTS_DIR)/$$(DEVICE_DTS).dtb | pad-to $$(BLOCKSIZE)
 671         IMAGE_SIZE := 15616k
 672         IMAGES += factory.bin
 673         IMAGE/factory.bin := append-rootfs | pad-rootfs | openmesh-image ce_type=A42
 674         IMAGE/sysupgrade.bin/squashfs := append-rootfs | pad-rootfs | sysupgrade-tar rootfs=$$$$@ | append-metadata
 675 endef
 676 TARGET_DEVICES += openmesh_a42
 677
 678 define Device/openmesh_a62
 679         $(call Device/FitImageLzma)
 680         DEVICE_VENDOR := OpenMesh
 681         DEVICE_MODEL := A62
 682         SOC := qcom-ipq4019
 683         DEVICE_DTS_CONFIG := config@om.a62
 684         BLOCKSIZE := 64k
 685         KERNEL = kernel-bin | lzma | fit lzma $$(DTS_DIR)/$$(DEVICE_DTS).dtb | pad-to $$(BLOCKSIZE)
 686         IMAGE_SIZE := 15552k
 687         IMAGES += factory.bin
 688         IMAGE/factory.bin := append-rootfs | pad-rootfs | openmesh-image ce_type=A62
 689         IMAGE/sysupgrade.bin/squashfs := append-rootfs | pad-rootfs | sysupgrade-tar rootfs=$$$$@ | append-metadata
 690         DEVICE_PACKAGES := ath10k-firmware-qca9888-ct
 691 endef
 692 TARGET_DEVICES += openmesh_a62
 693
 694 define Device/plasmacloud_pa1200
 695         $(call Device/FitImageLzma)
 696         DEVICE_VENDOR := Plasma Cloud
 697         DEVICE_MODEL := PA1200
 698         SOC := qcom-ipq4018
 699         DEVICE_DTS_CONFIG := config@pc.pa1200
 700         BLOCKSIZE := 64k
 701         KERNEL = kernel-bin | lzma | fit lzma $$(DTS_DIR)/$$(DEVICE_DTS).dtb | pad-to $$(BLOCKSIZE)
 702         IMAGE_SIZE := 15616k
 703         IMAGES += factory.bin
 704         IMAGE/factory.bin := append-rootfs | pad-rootfs | openmesh-image ce_type=PA1200
 705         IMAGE/sysupgrade.bin/squashfs := append-rootfs | pad-rootfs | sysupgrade-tar rootfs=$$$$@ | append-metadata
 706         DEVICE_PACKAGES := ipq-wifi-plasmacloud-pa1200
 707 endef
 708 TARGET_DEVICES += plasmacloud_pa1200
 709
 710 define Device/plasmacloud_pa2200
 711         $(call Device/FitImageLzma)
 712         DEVICE_VENDOR := Plasma Cloud
 713         DEVICE_MODEL := PA2200
 714         SOC := qcom-ipq4019
 715         DEVICE_DTS_CONFIG := config@pc.pa2200
 716         BLOCKSIZE := 64k
 717         KERNEL = kernel-bin | lzma | fit lzma $$(DTS_DIR)/$$(DEVICE_DTS).dtb | pad-to $$(BLOCKSIZE)
 718         IMAGE_SIZE := 15552k
 719         IMAGES += factory.bin
 720         IMAGE/factory.bin := append-rootfs | pad-rootfs | openmesh-image ce_type=PA2200
 721         IMAGE/sysupgrade.bin/squashfs := append-rootfs | pad-rootfs | sysupgrade-tar rootfs=$$$$@ | append-metadata
 722         DEVICE_PACKAGES := ath10k-firmware-qca9888-ct ipq-wifi-plasmacloud-pa2200
 723 endef
 724 TARGET_DEVICES += plasmacloud_pa2200
 725
 726 define Device/qcom_ap-dk01.1-c1
 727         DEVICE_VENDOR := Qualcomm Atheros
 728         DEVICE_MODEL := AP-DK01.1
 729         DEVICE_VARIANT := C1
 730         BOARD_NAME := ap-dk01.1-c1
 731         SOC := qcom-ipq4019
 732         DEVICE_DTS := qcom-ipq4019-ap.dk01.1-c1
 733         KERNEL_INSTALL := 1
 734         KERNEL_SIZE := 4096k
 735         IMAGE_SIZE := 26624k
 736         $(call Device/FitImage)
 737         IMAGE/sysupgrade.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-rootfs | pad-rootfs | append-metadata
 738 endef
 739 TARGET_DEVICES += qcom_ap-dk01.1-c1
 740
 741 define Device/qcom_ap-dk04.1-c1
 742         $(call Device/FitImage)
 743         $(call Device/UbiFit)
 744         DEVICE_VENDOR := Qualcomm Atheros
 745         DEVICE_MODEL := AP-DK04.1
 746         DEVICE_VARIANT := C1
 747         SOC := qcom-ipq4019
 748         DEVICE_DTS := qcom-ipq4019-ap.dk04.1-c1
 749         KERNEL_INSTALL := 1
 750         KERNEL_SIZE := 4048k
 751         BLOCKSIZE := 128k
 752         PAGESIZE := 2048
 753         BOARD_NAME := ap-dk04.1-c1
 754 endef
 755 TARGET_DEVICES += qcom_ap-dk04.1-c1
 756
 757 define Device/qxwlan_e2600ac-c1
 758         $(call Device/FitImage)
 759         DEVICE_VENDOR := Qxwlan
 760         DEVICE_MODEL := E2600AC
 761         DEVICE_VARIANT := C1
 762         BOARD_NAME := e2600ac-c1
 763         SOC := qcom-ipq4019
 764         KERNEL_SIZE := 4096k
 765         IMAGE_SIZE := 31232k
 766         IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
 767         DEVICE_PACKAGES := ipq-wifi-qxwlan_e2600ac
 768 endef
 769 TARGET_DEVICES += qxwlan_e2600ac-c1
 770
 771 define Device/qxwlan_e2600ac-c2
 772         $(call Device/FitImage)
 773         $(call Device/UbiFit)
 774         DEVICE_VENDOR := Qxwlan
 775         DEVICE_MODEL := E2600AC
 776         DEVICE_VARIANT := C2
 777         SOC := qcom-ipq4019
 778         KERNEL_INSTALL := 1
 779         BLOCKSIZE := 128k
 780         PAGESIZE := 2048
 781         DEVICE_PACKAGES := ipq-wifi-qxwlan_e2600ac
 782 endef
 783 TARGET_DEVICES += qxwlan_e2600ac-c2
 784
 785 define Device/unielec_u4019-32m
 786         $(call Device/FitImage)
 787         DEVICE_VENDOR := Unielec
 788         DEVICE_MODEL := U4019
 789         DEVICE_VARIANT := 32M
 790         BOARD_NAME := u4019-32m
 791         SOC := qcom-ipq4019
 792         KERNEL_SIZE := 4096k
 793         IMAGE_SIZE := 31232k
 794         IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
 795 endef
 796 TARGET_DEVICES += unielec_u4019-32m
 797
 798 define Device/zyxel_nbg6617
 799         $(call Device/FitImageLzma)
 800         DEVICE_VENDOR := ZyXEL
 801         DEVICE_MODEL := NBG6617
 802         SOC := qcom-ipq4018
 803         KERNEL_SIZE := 4096k
 804         ROOTFS_SIZE := 24960k
 805         RAS_BOARD := NBG6617
 806         RAS_ROOTFS_SIZE := 19840k
 807         RAS_VERSION := "$(VERSION_DIST) $(REVISION)"
 808         IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
 809         IMAGES += factory.bin
 810 #       The ZyXEL firmware allows flashing thru the web-gui only when the rootfs is
 811 #       at least as large as the one of the initial firmware image (not the current
 812 #       one on the device). This only applies to the Web-UI, the bootlaoder ignores
 813 #       this minimum-size. However, the larger image can be flashed both ways.
 814         IMAGE/factory.bin := append-rootfs | pad-rootfs | pad-to 64k | check-size $$$$(ROOTFS_SIZE) | zyxel-ras-image separate-kernel
 815         IMAGE/sysupgrade.bin/squashfs := append-rootfs | pad-rootfs | check-size $$$$(ROOTFS_SIZE) | sysupgrade-tar rootfs=$$$$@ | append-metadata
 816         DEVICE_PACKAGES := kmod-usb-ledtrig-usbport
 817 endef
 818 TARGET_DEVICES += zyxel_nbg6617
 819
 820 define Device/zyxel_wre6606
 821         $(call Device/FitImage)
 822         DEVICE_VENDOR := ZyXEL
 823         DEVICE_MODEL := WRE6606
 824         DEVICE_DTS_CONFIG := config@4
 825         SOC := qcom-ipq4018
 826         IMAGE_SIZE := 13184k
 827         IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | check-size | append-metadata
 828         DEVICE_PACKAGES := -kmod-ath10k-ct kmod-ath10k-ct-smallbuffers
 829 endef
 830 TARGET_DEVICES += zyxel_wre6606