target/linux/ipq806x/files-4.14/arch/arm/boot/dts/qcom-ipq8064-d7800.dts

   1 #include "qcom-ipq8064-v2.0.dtsi"
   2
   3 #include <dt-bindings/input/input.h>
   4
   5 / {
   6         model = "Netgear Nighthawk X4 D7800";
   7         compatible = "netgear,d7800", "qcom,ipq8064";
   8
   9         memory@0 {
  10                 reg = <0x42000000 0xe000000>;
  11                 device_type = "memory";
  12         };
  13
  14         reserved-memory {
  15                 #address-cells = <1>;
  16                 #size-cells = <1>;
  17                 ranges;
  18                 rsvd@41200000 {
  19                         reg = <0x41200000 0x300000>;
  20                         no-map;
  21                 };
  22         };
  23
  24         aliases {
  25                 serial0 = &gsbi4_serial;
  26                 mdio-gpio0 = &mdio0;
  27
  28                 led-boot = &power_white;
  29                 led-failsafe = &power_amber;
  30                 led-running = &power_white;
  31                 led-upgrade = &power_amber;
  32         };
  33
  34         chosen {
  35                 bootargs = "rootfstype=squashfs noinitrd";
  36                 stdout-path = "serial0:115200n8";
  37         };
  38
  39         soc {
  40                 pinmux@800000 {
  41                         button_pins: button_pins {
  42                                 mux {
  43                                         pins = "gpio6", "gpio54", "gpio65";
  44                                         function = "gpio";
  45                                         drive-strength = <2>;
  46                                         bias-pull-up;
  47                                 };
  48                         };
  49
  50                         i2c4_pins: i2c4_pinmux {
  51                                 mux {
  52                                         pins = "gpio12", "gpio13";
  53                                         function = "gsbi4";
  54                                         drive-strength = <12>;
  55                                         bias-disable;
  56                                 };
  57                         };
  58
  59                         led_pins: led_pins {
  60                                 mux {
  61                                         pins = "gpio7", "gpio8", "gpio9", "gpio22", "gpio23",
  62                                                 "gpio24","gpio26", "gpio53", "gpio64";
  63                                         function = "gpio";
  64                                         drive-strength = <2>;
  65                                         bias-pull-up;
  66                                 };
  67                         };
  68
  69                         mdio0_pins: mdio0_pins {
  70                                 mux {
  71                                         pins = "gpio0", "gpio1";
  72                                         function = "gpio";
  73                                         drive-strength = <8>;
  74                                         bias-disable;
  75                                 };
  76                         };
  77
  78                         nand_pins: nand_pins {
  79                                 mux {
  80                                         pins = "gpio34", "gpio35", "gpio36",
  81                                                "gpio37", "gpio38", "gpio39",
  82                                                "gpio40", "gpio41", "gpio42",
  83                                                "gpio43", "gpio44", "gpio45",
  84                                                "gpio46", "gpio47";
  85                                         function = "nand";
  86                                         drive-strength = <10>;
  87                                         bias-disable;
  88                                 };
  89                                 pullups {
  90                                         pins = "gpio39";
  91                                         bias-pull-up;
  92                                 };
  93                                 hold {
  94                                         pins = "gpio40", "gpio41", "gpio42",
  95                                                "gpio43", "gpio44", "gpio45",
  96                                                "gpio46", "gpio47";
  97                                         bias-bus-hold;
  98                                 };
  99                         };
 100
 101                         rgmii2_pins: rgmii2_pins {
 102                                 mux {
 103                                         pins = "gpio27", "gpio28", "gpio29", "gpio30", "gpio31", "gpio32",
 104                                                "gpio51", "gpio52", "gpio59", "gpio60", "gpio61", "gpio62" ;
 105                                         function = "rgmii2";
 106                                         drive-strength = <8>;
 107                                         bias-disable;
 108                                 };
 109                         };
 110
 111                         usb0_pwr_en_pins: usb0_pwr_en_pins {
 112                                 mux {
 113                                         pins = "gpio15";
 114                                         function = "gpio";
 115                                         drive-strength = <12>;
 116                                         bias-pull-down;
 117                                         output-high;
 118                                 };
 119                         };
 120
 121                         usb1_pwr_en_pins: usb1_pwr_en_pins {
 122                                 mux {
 123                                         pins = "gpio16", "gpio68";
 124                                         function = "gpio";
 125                                         drive-strength = <12>;
 126                                         bias-pull-down;
 127                                         output-high;
 128                                 };
 129                         };
 130                 };
 131
 132                 gsbi@16300000 {
 133                         qcom,mode = <GSBI_PROT_I2C_UART>;
 134                         status = "ok";
 135                         serial@16340000 {
 136                                 status = "ok";
 137                         };
 138                         /*
 139                          * The i2c device on gsbi4 should not be enabled.
 140                          * On ipq806x designs gsbi4 i2c is meant for exclusive
 141                          * RPM usage. Turning this on in kernel manifests as
 142                          * i2c failure for the RPM.
 143                          */
 144                 };
 145
 146                 sata-phy@1b400000 {
 147                         status = "ok";
 148                 };
 149
 150                 sata@29000000 {
 151                         ports-implemented = <0x1>;
 152                         status = "ok";
 153                 };
 154
 155                 phy@100f8800 {          /* USB3 port 1 HS phy */
 156                         status = "ok";
 157                 };
 158
 159                 phy@100f8830 {          /* USB3 port 1 SS phy */
 160                         status = "ok";
 161                 };
 162
 163                 phy@110f8800 {          /* USB3 port 0 HS phy */
 164                         status = "ok";
 165                 };
 166
 167                 phy@110f8830 {          /* USB3 port 0 SS phy */
 168                         status = "ok";
 169                 };
 170
 171                 usb30@0 {
 172                         status = "ok";
 173
 174                         pinctrl-0 = <&usb0_pwr_en_pins>;
 175                         pinctrl-names = "default";
 176                 };
 177
 178                 usb30@1 {
 179                         status = "ok";
 180
 181                         pinctrl-0 = <&usb1_pwr_en_pins>;
 182                         pinctrl-names = "default";
 183                 };
 184
 185                 pcie0: pci@1b500000 {
 186                         status = "ok";
 187                         reset-gpio = <&qcom_pinmux 3 GPIO_ACTIVE_HIGH>;
 188                         pinctrl-0 = <&pcie0_pins>;
 189                         pinctrl-names = "default";
 190                 };
 191
 192                 pcie1: pci@1b700000 {
 193                         status = "ok";
 194                         reset-gpio = <&qcom_pinmux 48 GPIO_ACTIVE_HIGH>;
 195                         pinctrl-0 = <&pcie1_pins>;
 196                         pinctrl-names = "default";
 197                         force_gen1 = <1>;
 198                 };
 199
 200                 nand@1ac00000 {
 201                         status = "ok";
 202
 203                         pinctrl-0 = <&nand_pins>;
 204                         pinctrl-names = "default";
 205
 206                         #address-cells = <1>;
 207                         #size-cells = <1>;
 208
 209                         cs0 {
 210                                 reg = <0>;
 211                                 compatible = "qcom,nandcs";
 212
 213                                 nand-ecc-strength = <4>;
 214                                 nand-bus-width = <8>;
 215                                 nand-ecc-step-size = <512>;
 216
 217                                 partitions {
 218                                         compatible = "fixed-partitions";
 219                                         #address-cells = <1>;
 220                                         #size-cells = <1>;
 221
 222                                         qcadata@0 {
 223                                                 label = "qcadata";
 224                                                 reg = <0x0000000 0x0c80000>;
 225                                                 read-only;
 226                                         };
 227
 228                                         APPSBL@c80000 {
 229                                                 label = "APPSBL";
 230                                                 reg = <0x0c80000 0x0500000>;
 231                                                 read-only;
 232                                         };
 233
 234                                         APPSBLENV@1180000 {
 235                                                 label = "APPSBLENV";
 236                                                 reg = <0x1180000 0x0080000>;
 237                                                 read-only;
 238                                         };
 239
 240                                         art: art@1200000 {
 241                                                 label = "art";
 242                                                 reg = <0x1200000 0x0140000>;
 243                                                 read-only;
 244                                         };
 245
 246                                         artbak: art@1340000 {
 247                                                 label = "artbak";
 248                                                 reg = <0x1340000 0x0140000>;
 249                                                 read-only;
 250                                         };
 251
 252                                         kernel@1480000 {
 253                                                 label = "kernel";
 254                                                 reg = <0x1480000 0x0400000>;
 255                                         };
 256
 257                                         ubi@1880000 {
 258                                                 label = "ubi";
 259                                                 reg = <0x1880000 0x1C00000>;
 260                                         };
 261
 262                                         netgear@3480000 {
 263                                                 label = "netgear";
 264                                                 reg = <0x3480000 0x4480000>;
 265                                                 read-only;
 266                                         };
 267
 268                                         reserve@7900000 {
 269                                                 label = "reserve";
 270                                                 reg = <0x7900000 0x0700000>;
 271                                                 read-only;
 272                                         };
 273                                 };
 274                         };
 275                 };
 276
 277                 mdio0: mdio {
 278                         compatible = "virtual,mdio-gpio";
 279                         #address-cells = <1>;
 280                         #size-cells = <0>;
 281                         gpios = <&qcom_pinmux 1 GPIO_ACTIVE_HIGH &qcom_pinmux 0 GPIO_ACTIVE_HIGH>;
 282                         pinctrl-0 = <&mdio0_pins>;
 283                         pinctrl-names = "default";
 284
 285                         phy0: ethernet-phy@0 {
 286                                 reg = <0>;
 287                                 qca,ar8327-initvals = <
 288                                         0x00004 0x7600000   /* PAD0_MODE */
 289                                         0x00008 0x1000000   /* PAD5_MODE */
 290                                         0x0000c 0x80        /* PAD6_MODE */
 291                                         0x000e4 0x6a545     /* MAC_POWER_SEL */
 292                                         0x000e0 0xc74164de  /* SGMII_CTRL */
 293                                         0x0007c 0x4e        /* PORT0_STATUS */
 294                                         0x00094 0x4e        /* PORT6_STATUS */
 295                                         >;
 296                         };
 297
 298                         phy4: ethernet-phy@4 {
 299                                 reg = <4>;
 300                         };
 301                 };
 302
 303                 gmac1: ethernet@37200000 {
 304                         status = "ok";
 305                         phy-mode = "rgmii";
 306                         phy-handle = <&phy4>;
 307                         qcom,id = <1>;
 308
 309                         pinctrl-0 = <&rgmii2_pins>;
 310                         pinctrl-names = "default";
 311
 312                         mtd-mac-address = <&art 6>;
 313                 };
 314
 315                 gmac2: ethernet@37400000 {
 316                         status = "ok";
 317                         phy-mode = "sgmii";
 318                         qcom,id = <2>;
 319
 320                         mtd-mac-address = <&art 0>;
 321
 322                         fixed-link {
 323                                 speed = <1000>;
 324                                 full-duplex;
 325                         };
 326                 };
 327         };
 328
 329         gpio-keys {
 330                 compatible = "gpio-keys";
 331                 pinctrl-0 = <&button_pins>;
 332                 pinctrl-names = "default";
 333
 334                 wifi {
 335                         label = "wifi";
 336                         gpios = <&qcom_pinmux 6 GPIO_ACTIVE_LOW>;
 337                         linux,code = <KEY_RFKILL>;
 338                 };
 339
 340                 reset {
 341                         label = "reset";
 342                         gpios = <&qcom_pinmux 54 GPIO_ACTIVE_LOW>;
 343                         linux,code = <KEY_RESTART>;
 344                 };
 345
 346                 wps {
 347                         label = "wps";
 348                         gpios = <&qcom_pinmux 65 GPIO_ACTIVE_LOW>;
 349                         linux,code = <KEY_WPS_BUTTON>;
 350                 };
 351         };
 352
 353         gpio-leds {
 354                 compatible = "gpio-leds";
 355                 pinctrl-0 = <&led_pins>;
 356                 pinctrl-names = "default";
 357
 358                 usb1 {
 359                         label = "d7800:white:usb1";
 360                         gpios = <&qcom_pinmux 7 GPIO_ACTIVE_HIGH>;
 361                 };
 362
 363                 usb2 {
 364                         label = "d7800:white:usb2";
 365                         gpios = <&qcom_pinmux 8 GPIO_ACTIVE_HIGH>;
 366                 };
 367
 368                 power_amber: power_amber {
 369                         label = "d7800:amber:power";
 370                         gpios = <&qcom_pinmux 9 GPIO_ACTIVE_HIGH>;
 371                 };
 372
 373                 wan_white {
 374                         label = "d7800:white:wan";
 375                         gpios = <&qcom_pinmux 22 GPIO_ACTIVE_HIGH>;
 376                 };
 377
 378                 wan_amber {
 379                         label = "d7800:amber:wan";
 380                         gpios = <&qcom_pinmux 23 GPIO_ACTIVE_HIGH>;
 381                 };
 382
 383                 wps {
 384                         label = "d7800:white:wps";
 385                         gpios = <&qcom_pinmux 24 GPIO_ACTIVE_HIGH>;
 386                 };
 387
 388                 esata {
 389                         label = "d7800:white:esata";
 390                         gpios = <&qcom_pinmux 26 GPIO_ACTIVE_HIGH>;
 391                 };
 392
 393                 power_white: power_white {
 394                         label = "d7800:white:power";
 395                         gpios = <&qcom_pinmux 53 GPIO_ACTIVE_HIGH>;
 396                         default-state = "keep";
 397                 };
 398
 399                 wifi {
 400                         label = "d7800:white:wifi";
 401                         gpios = <&qcom_pinmux 64 GPIO_ACTIVE_HIGH>;
 402                 };
 403         };
 404 };
 405
 406 &adm_dma {
 407         status = "ok";
 408 };