projects / openwrt / openwrt.git / blob
? search:


42d6e2b7a072777c31833ae878b0aceca8b187e8
[openwrt/openwrt.git] / target / linux / ipq806x / files / arch / arm / boot / dts / qcom-ipq8065-r7800.dts
1 #include "qcom-ipq8065-v1.0.dtsi"
2
3 #include <dt-bindings/input/input.h>
4
5 / {
6 model = "Netgear Nighthawk X4S R7800";
7 compatible = "netgear,r7800", "qcom,ipq8065", "qcom,ipq8064";
8
9 memory@0 {
10 reg = <0x42000000 0x1e000000>;
11 device_type = "memory";
12 };
13
14 reserved-memory {
15 #address-cells = <1>;
16 #size-cells = <1>;
17 ranges;
18 rsvd@41200000 {
19 reg = <0x41200000 0x300000>;
20 no-map;
21 };
22
23 rsvd@5fe00000 {
24 reg = <0x5fe00000 0x200000>;
25 reusable;
26 };
27 };
28
29 aliases {
30 serial0 = &uart4;
31 mdio-gpio0 = &mdio0;
32
33 led-boot = &power_white;
34 led-failsafe = &power_white;
35 led-running = &power_white;
36 led-upgrade = &power_amber;
37 };
38
39 chosen {
40 linux,stdout-path = "serial0:115200n8";
41 };
42
43 soc {
44 pinmux@800000 {
45 button_pins: button_pins {
46 mux {
47 pins = "gpio6", "gpio54", "gpio65";
48 function = "gpio";
49 drive-strength = <2>;
50 bias-pull-up;
51 };
52 };
53
54 i2c4_pins: i2c4_pinmux {
55 mux {
56 pins = "gpio12", "gpio13";
57 function = "gsbi4";
58 drive-strength = <12>;
59 bias-disable;
60 };
61 };
62
63 led_pins: led_pins {
64 pins = "gpio7", "gpio8", "gpio9", "gpio22", "gpio23",
65 "gpio24","gpio26", "gpio53", "gpio64", "gpio67";
66 function = "gpio";
67 drive-strength = <2>;
68 bias-pull-down;
69 };
70
71 nand_pins: nand_pins {
72 mux {
73 pins = "gpio34", "gpio35", "gpio36",
74 "gpio37", "gpio38", "gpio39",
75 "gpio40", "gpio41", "gpio42",
76 "gpio43", "gpio44", "gpio45",
77 "gpio46", "gpio47";
78 function = "nand";
79 drive-strength = <10>;
80 bias-disable;
81 };
82 pullups {
83 pins = "gpio39";
84 bias-pull-up;
85 };
86 hold {
87 pins = "gpio40", "gpio41", "gpio42",
88 "gpio43", "gpio44", "gpio45",
89 "gpio46", "gpio47";
90 bias-bus-hold;
91 };
92 };
93
94 mdio0_pins: mdio0_pins {
95 mux {
96 pins = "gpio0", "gpio1";
97 function = "gpio";
98 drive-strength = <8>;
99 bias-disable;
100 };
101
102 clk {
103 pins = "gpio1";
104 input-disable;
105 };
106 };
107
108 rgmii2_pins: rgmii2_pins {
109 mux {
110 pins = "gpio27", "gpio28", "gpio29", "gpio30", "gpio31", "gpio32",
111 "gpio51", "gpio52", "gpio59", "gpio60", "gpio61", "gpio62" ;
112 function = "rgmii2";
113 drive-strength = <8>;
114 bias-disable;
115 };
116
117 tx {
118 pins = "gpio27", "gpio28", "gpio29", "gpio30", "gpio31", "gpio32" ;
119 input-disable;
120 };
121 };
122
123 spi_pins: spi_pins {
124 mux {
125 pins = "gpio18", "gpio19", "gpio21";
126 function = "gsbi5";
127 bias-pull-down;
128 };
129
130 data {
131 pins = "gpio18", "gpio19";
132 drive-strength = <10>;
133 };
134
135 cs {
136 pins = "gpio20";
137 drive-strength = <10>;
138 bias-pull-up;
139 };
140
141 clk {
142 pins = "gpio21";
143 drive-strength = <12>;
144 };
145 };
146
147 spi6_pins: spi6_pins {
148 mux {
149 pins = "gpio55", "gpio56", "gpio58";
150 function = "gsbi6";
151 bias-pull-down;
152 };
153
154 mosi {
155 pins = "gpio55";
156 drive-strength = <12>;
157 };
158
159 miso {
160 pins = "gpio56";
161 drive-strength = <14>;
162 };
163
164 cs {
165 pins = "gpio57";
166 drive-strength = <12>;
167 bias-pull-up;
168 };
169
170 clk {
171 pins = "gpio58";
172 drive-strength = <12>;
173 };
174
175 reset {
176 pins = "gpio33";
177 drive-strength = <10>;
178 bias-pull-down;
179 output-high;
180 };
181 };
182
183 usb0_pwr_en_pins: usb0_pwr_en_pins {
184 mux {
185 pins = "gpio15";
186 function = "gpio";
187 drive-strength = <12>;
188 bias-pull-down;
189 output-high;
190 };
191 };
192
193 usb1_pwr_en_pins: usb1_pwr_en_pins {
194 mux {
195 pins = "gpio16", "gpio68";
196 function = "gpio";
197 drive-strength = <12>;
198 bias-pull-down;
199 output-high;
200 };
201 };
202 };
203
204 gsbi@16300000 {
205 qcom,mode = <GSBI_PROT_I2C_UART>;
206 status = "ok";
207 serial@16340000 {
208 status = "ok";
209 };
210 /*
211 * The i2c device on gsbi4 should not be enabled.
212 * On ipq806x designs gsbi4 i2c is meant for exclusive
213 * RPM usage. Turning this on in kernel manifests as
214 * i2c failure for the RPM.
215 */
216 };
217
218 gsbi5: gsbi@1a200000 {
219 qcom,mode = <GSBI_PROT_SPI>;
220 status = "ok";
221
222 spi5: spi@1a280000 {
223 status = "ok";
224 spi-max-frequency = <50000000>;
225 pinctrl-0 = <&spi_pins>;
226 pinctrl-names = "default";
227
228 cs-gpios = <&qcom_pinmux 20 GPIO_ACTIVE_HIGH>;
229
230 flash: m25p80@0 {
231 compatible = "jedec,spi-nor";
232 #address-cells = <1>;
233 #size-cells = <1>;
234 spi-max-frequency = <50000000>;
235 reg = <0>;
236
237 linux,part-probe = "qcom-smem";
238 };
239 };
240 };
241
242 gsbi6: gsbi@16500000 {
243 qcom,mode = <GSBI_PROT_SPI>;
244 status = "ok";
245 spi6: spi@16580000 {
246 status = "ok";
247 spi-max-frequency = <6000000>;
248 pinctrl-0 = <&spi6_pins>;
249 pinctrl-names = "default";
250
251 cs-gpios = <&qcom_pinmux 57 GPIO_ACTIVE_HIGH>;
252
253 spi-nor@0 {
254 compatible = "spi-nor";
255 reg = <0>;
256 spi-max-frequency = <6000000>;
257 };
258 };
259 };
260
261 sata-phy@1b400000 {
262 status = "ok";
263 };
264
265 sata@29000000 {
266 ports-implemented = <0x1>;
267 status = "ok";
268 };
269
270 phy@100f8800 { /* USB3 port 1 HS phy */
271 status = "ok";
272 };
273
274 phy@100f8830 { /* USB3 port 1 SS phy */
275 status = "ok";
276 };
277
278 phy@110f8800 { /* USB3 port 0 HS phy */
279 status = "ok";
280 };
281
282 phy@110f8830 { /* USB3 port 0 SS phy */
283 status = "ok";
284 };
285
286 usb30@0 {
287 status = "ok";
288
289 pinctrl-0 = <&usb0_pwr_en_pins>;
290 pinctrl-names = "default";
291 };
292
293 usb30@1 {
294 status = "ok";
295
296 pinctrl-0 = <&usb1_pwr_en_pins>;
297 pinctrl-names = "default";
298 };
299
300 pcie0: pci@1b500000 {
301 status = "ok";
302 phy-tx0-term-offset = <7>;
303 };
304
305 pcie1: pci@1b700000 {
306 status = "ok";
307 phy-tx0-term-offset = <7>;
308 };
309
310 nand@1ac00000 {
311 status = "ok";
312
313 pinctrl-0 = <&nand_pins>;
314 pinctrl-names = "default";
315
316 nand-ecc-strength = <4>;
317 nand-ecc-step-size = <512>;
318 nand-bus-width = <8>;
319
320 #address-cells = <1>;
321 #size-cells = <1>;
322
323 qcadata@0 {
324 label = "qcadata";
325 reg = <0x0000000 0x0c80000>;
326 read-only;
327 };
328
329 APPSBL@c80000 {
330 label = "APPSBL";
331 reg = <0x0c80000 0x0500000>;
332 read-only;
333 };
334
335 APPSBLENV@1180000 {
336 label = "APPSBLENV";
337 reg = <0x1180000 0x0080000>;
338 read-only;
339 };
340
341 art: art@1200000 {
342 label = "art";
343 reg = <0x1200000 0x0140000>;
344 read-only;
345 };
346
347 artbak: art@1340000 {
348 label = "artbak";
349 reg = <0x1340000 0x0140000>;
350 read-only;
351 };
352
353 kernel@1480000 {
354 label = "kernel";
355 reg = <0x1480000 0x0200000>;
356 };
357
358 ubi@1680000 {
359 label = "ubi";
360 reg = <0x1680000 0x1E00000>;
361 };
362
363 netgear@3480000 {
364 label = "netgear";
365 reg = <0x3480000 0x4480000>;
366 read-only;
367 };
368
369 reserve@7900000 {
370 label = "reserve";
371 reg = <0x7900000 0x0700000>;
372 read-only;
373 };
374
375 firmware@1480000 {
376 label = "firmware";
377 reg = <0x1480000 0x2000000>;
378 };
379 };
380
381 mdio0: mdio {
382 compatible = "virtual,mdio-gpio";
383 #address-cells = <1>;
384 #size-cells = <0>;
385 gpios = <&qcom_pinmux 1 GPIO_ACTIVE_HIGH &qcom_pinmux 0 GPIO_ACTIVE_HIGH>;
386 pinctrl-0 = <&mdio0_pins>;
387 pinctrl-names = "default";
388
389
390 phy0: ethernet-phy@0 {
391 device_type = "ethernet-phy";
392 reg = <0>;
393 qca,ar8327-initvals = <
394 0x00004 0x7600000 /* PAD0_MODE */
395 0x00008 0x1000000 /* PAD5_MODE */
396 0x0000c 0x80 /* PAD6_MODE */
397 0x000e4 0xaa545 /* MAC_POWER_SEL */
398 0x000e0 0xc74164de /* SGMII_CTRL */
399 0x0007c 0x4e /* PORT0_STATUS */
400 0x00094 0x4e /* PORT6_STATUS */
401 0x00970 0x1e864443 /* QM_PORT0_CTRL0 */
402 0x00974 0x000001c6 /* QM_PORT0_CTRL1 */
403 0x00978 0x19008643 /* QM_PORT1_CTRL0 */
404 0x0097c 0x000001c6 /* QM_PORT1_CTRL1 */
405 0x00980 0x19008643 /* QM_PORT2_CTRL0 */
406 0x00984 0x000001c6 /* QM_PORT2_CTRL1 */
407 0x00988 0x19008643 /* QM_PORT3_CTRL0 */
408 0x0098c 0x000001c6 /* QM_PORT3_CTRL1 */
409 0x00990 0x19008643 /* QM_PORT4_CTRL0 */
410 0x00994 0x000001c6 /* QM_PORT4_CTRL1 */
411 0x00998 0x1e864443 /* QM_PORT5_CTRL0 */
412 0x0099c 0x000001c6 /* QM_PORT5_CTRL1 */
413 0x009a0 0x1e864443 /* QM_PORT6_CTRL0 */
414 0x009a4 0x000001c6 /* QM_PORT6_CTRL1 */
415 >;
416 qca,ar8327-vlans = <
417 0x1 0x5e /* VLAN1 Ports 1/2/3/4/6 */
418 0x2 0x21 /* VLAN2 Ports 0/5 */
419 >;
420 };
421
422 phy4: ethernet-phy@4 {
423 device_type = "ethernet-phy";
424 reg = <4>;
425 qca,ar8327-initvals = <
426 0x000e4 0x6a545 /* MAC_POWER_SEL */
427 0x0000c 0x80 /* PAD6_MODE */
428 >;
429 };
430 };
431
432 gmac1: ethernet@37200000 {
433 status = "ok";
434 phy-mode = "rgmii";
435 qcom,id = <1>;
436 qcom,phy_mdio_addr = <4>;
437 qcom,poll_required = <0>;
438 qcom,rgmii_delay = <1>;
439 qcom,phy_mii_type = <0>;
440 qcom,emulation = <0>;
441 qcom,irq = <255>;
442 mdiobus = <&mdio0>;
443
444 pinctrl-0 = <&rgmii2_pins>;
445 pinctrl-names = "default";
446
447 mtd-mac-address = <&art 6>;
448
449 fixed-link {
450 speed = <1000>;
451 full-duplex;
452 };
453 };
454
455 gmac2: ethernet@37400000 {
456 status = "ok";
457 phy-mode = "sgmii";
458 qcom,id = <2>;
459 qcom,phy_mdio_addr = <0>; /* none */
460 qcom,poll_required = <0>; /* no polling */
461 qcom,rgmii_delay = <0>;
462 qcom,phy_mii_type = <1>;
463 qcom,emulation = <0>;
464 qcom,irq = <258>;
465 mdiobus = <&mdio0>;
466
467 mtd-mac-address = <&art 0>;
468
469 fixed-link {
470 speed = <1000>;
471 full-duplex;
472 };
473 };
474
475 rpm@108000 {
476 pinctrl-0 = <&i2c4_pins>;
477 pinctrl-names = "default";
478 };
479 };
480
481 gpio-keys {
482 compatible = "gpio-keys";
483 pinctrl-0 = <&button_pins>;
484 pinctrl-names = "default";
485
486 wifi {
487 label = "wifi";
488 gpios = <&qcom_pinmux 6 GPIO_ACTIVE_LOW>;
489 linux,code = <KEY_RFKILL>;
490 debounce-interval = <60>;
491 wakeup-source;
492 };
493
494 reset {
495 label = "reset";
496 gpios = <&qcom_pinmux 54 GPIO_ACTIVE_LOW>;
497 linux,code = <KEY_RESTART>;
498 debounce-interval = <60>;
499 wakeup-source;
500 };
501
502 wps {
503 label = "wps";
504 gpios = <&qcom_pinmux 65 GPIO_ACTIVE_LOW>;
505 linux,code = <KEY_WPS_BUTTON>;
506 debounce-interval = <60>;
507 wakeup-source;
508 };
509 };
510
511 gpio-leds {
512 compatible = "gpio-leds";
513 pinctrl-0 = <&led_pins>;
514 pinctrl-names = "default";
515
516 power_white: power_white {
517 label = "r7800:white:power";
518 gpios = <&qcom_pinmux 53 GPIO_ACTIVE_HIGH>;
519 default-state = "on";
520 };
521
522 power_amber: power_amber {
523 label = "r7800:amber:power";
524 gpios = <&qcom_pinmux 9 GPIO_ACTIVE_HIGH>;
525 };
526
527 wan_white {
528 label = "r7800:white:wan";
529 gpios = <&qcom_pinmux 22 GPIO_ACTIVE_HIGH>;
530 };
531
532 wan_amber {
533 label = "r7800:amber:wan";
534 gpios = <&qcom_pinmux 23 GPIO_ACTIVE_HIGH>;
535 };
536
537 usb1 {
538 label = "r7800:white:usb1";
539 gpios = <&qcom_pinmux 7 GPIO_ACTIVE_HIGH>;
540 };
541
542 usb2 {
543 label = "r7800:white:usb2";
544 gpios = <&qcom_pinmux 8 GPIO_ACTIVE_HIGH>;
545 };
546
547 esata {
548 label = "r7800:white:esata";
549 gpios = <&qcom_pinmux 26 GPIO_ACTIVE_HIGH>;
550 };
551
552 rfkill {
553 label = "r7800:white:rfkill";
554 gpios = <&qcom_pinmux 64 GPIO_ACTIVE_HIGH>;
555 };
556
557 wps {
558 label = "r7800:white:wps";
559 gpios = <&qcom_pinmux 24 GPIO_ACTIVE_HIGH>;
560 };
561
562 wifi {
563 label = "r7800:white:wifi";
564 gpios = <&qcom_pinmux 67 GPIO_ACTIVE_HIGH>;
565 };
566 };
567 };
568
569 &adm_dma {
570 status = "ok";
571 };
OpenWrt Source Repository