kernel: bump 4.14 to 4.14.43
[openwrt/openwrt.git] / target / linux / ipq806x / patches-4.14 / 0053-regulator-add-smb208-support.patch
1 From ef10381ca4d01848ebedb4afb2c78feb8052f103 Mon Sep 17 00:00:00 2001
2 From: Adrian Panella <ianchi74@outlook.com>
3 Date: Thu, 9 Mar 2017 08:26:54 +0100
4 Subject: [PATCH 53/69] regulator: add smb208 support
5
6 Signed-off-by: Adrian Panella <ianchi74@outlook.com>
7 ---
8 Documentation/devicetree/bindings/mfd/qcom-rpm.txt | 4 ++++
9 drivers/regulator/qcom_rpm-regulator.c | 9 +++++++++
10 2 files changed, 13 insertions(+)
11
12 --- a/Documentation/devicetree/bindings/mfd/qcom-rpm.txt
13 +++ b/Documentation/devicetree/bindings/mfd/qcom-rpm.txt
14 @@ -61,6 +61,7 @@ Regulator nodes are identified by their
15 "qcom,rpm-pm8901-regulators"
16 "qcom,rpm-pm8921-regulators"
17 "qcom,rpm-pm8018-regulators"
18 + "qcom,rpm-smb208-regulators"
19
20 - vdd_l0_l1_lvs-supply:
21 - vdd_l2_l11_l12-supply:
22 @@ -171,6 +172,9 @@ pm8018:
23 s1, s2, s3, s4, s5, , l1, l2, l3, l4, l5, l6, l7, l8, l9, l10, l11,
24 l12, l14, lvs1
25
26 +smb208:
27 + s1a, s1b, s2a, s2b
28 +
29 The content of each sub-node is defined by the standard binding for regulators -
30 see regulator.txt - with additional custom properties described below:
31
32 --- a/drivers/regulator/qcom_rpm-regulator.c
33 +++ b/drivers/regulator/qcom_rpm-regulator.c
34 @@ -933,12 +933,21 @@ static const struct rpm_regulator_data r
35 { }
36 };
37
38 +static const struct rpm_regulator_data rpm_smb208_regulators[] = {
39 + { "s1a", QCOM_RPM_SMB208_S1a, &smb208_smps, "vin_s1a" },
40 + { "s1b", QCOM_RPM_SMB208_S1b, &smb208_smps, "vin_s1b" },
41 + { "s2a", QCOM_RPM_SMB208_S2a, &smb208_smps, "vin_s2a" },
42 + { "s2b", QCOM_RPM_SMB208_S2b, &smb208_smps, "vin_s2b" },
43 + { }
44 +};
45 +
46 static const struct of_device_id rpm_of_match[] = {
47 { .compatible = "qcom,rpm-pm8018-regulators",
48 .data = &rpm_pm8018_regulators },
49 { .compatible = "qcom,rpm-pm8058-regulators", .data = &rpm_pm8058_regulators },
50 { .compatible = "qcom,rpm-pm8901-regulators", .data = &rpm_pm8901_regulators },
51 { .compatible = "qcom,rpm-pm8921-regulators", .data = &rpm_pm8921_regulators },
52 + { .compatible = "qcom,rpm-smb208-regulators", .data = &rpm_smb208_regulators },
53 { }
54 };
55 MODULE_DEVICE_TABLE(of, rpm_of_match);