target/linux/lantiq/dts/ARV7510PW22.dts

   1 /dts-v1/;
   2
   3 /include/ "danube.dtsi"
   4
   5 / {
   6         model = "ARV7510PW22 - Astoria Networks";
   7
   8         chosen {
   9                 bootargs = "console=ttyLTQ0,115200 init=/etc/preinit";
  10         };
  11
  12         memory@0 {
  13                 reg = <0x0 0x4000000>;
  14         };
  15
  16         sram@1F000000 {
  17                 vmmc@107000 {
  18                         status = "okay";
  19                         gpios = <&gpio 9 0>;
  20                 };
  21         };
  22
  23         fpi@10000000 {
  24                 localbus@0 {
  25                         nor-boot@0 {
  26                                 compatible = "lantiq,nor";
  27                                 bank-width = <2>;
  28                                 reg = <0 0x0 0x1000000>;
  29                                 #address-cells = <1>;
  30                                 #size-cells = <1>;
  31
  32                                 partition@0 {
  33                                         label = "uboot";
  34                                         reg = <0x00000 0x40000>;
  35                                         read-only;
  36                                 };
  37
  38                                 partition@40000 {
  39                                         label = "uboot_env";
  40                                         reg = <0x40000 0x20000>;
  41                                         read-only;
  42                                 };
  43
  44                                 partition@60000 {
  45                                         label = "firmware";
  46                                         reg = <0x60000 0xf80000>;
  47                                 };
  48
  49                                 partition@fe0000 {
  50                                         label = "board_config";
  51                                         reg = <0xfe0000 0x20000>;
  52                                         read-only;
  53                                 };
  54                         };
  55
  56                         mac_addr {
  57                                 compatible = "lantiq,eth-mac";
  58                                 reg = <0 0xfe0016 0x6>;
  59                                 mac-increment = <2>;
  60                         };
  61                 };
  62
  63                 gpio: pinmux@E100B10 {
  64                         pinctrl-names = "default";
  65                         pinctrl-0 = <&state_default>;
  66
  67                         state_default: pinmux {
  68                                 exin {
  69                                         lantiq,groups = "exin1";
  70                                         lantiq,function = "exin";
  71                                         lantiq,pull = <2>;
  72                                         lantiq,output = <0>;
  73                                 };
  74                                 pci_in {
  75                                         lantiq,groups = "req1", "req2";
  76                                         lantiq,function = "pci";
  77                                         lantiq,open-drain = <1>;
  78                                         lantiq,pull = <2>;
  79                                         lantiq,output = <0>;
  80                                 };
  81                                 pci_out {
  82                                         lantiq,groups = "gnt1";
  83                                         lantiq,function = "pci";
  84                                         lantiq,output = <1>;
  85                                 };
  86                                 pci_rst {
  87                                         lantiq,pins = "io21";
  88                                         lantiq,pull = <2>;
  89                                         lantiq,output = <1>;
  90                                 };
  91                                 pins_out {
  92                                         lantiq,pins = "io2", "io4", "io8", "io9", "io10", "io15", "io20";
  93                                         lantiq,output = <1>;
  94                                 };
  95                                 pins_in {
  96                                         lantiq,pins = "io11", "io12", "io28";
  97                                         lantiq,open-drain = <1>;
  98                                         lantiq,pull = <2>;
  99                                         lantiq,output = <0>;
 100                                 };
 101                         };
 102                 };
 103
 104                 ifxhcd@E101000 {
 105                         status = "okay";
 106                         gpios = <&gpio 8 0>;
 107                 };
 108
 109                 etop@E180000 {
 110                         phy-mode = "mii";
 111                         /* Switch reset 19 */
 112                 };
 113
 114                 pci@E105400 {
 115                         status = "okay";
 116                         lantiq,external-clock;
 117                         interrupt-map = <
 118                                 0x7000 0 0 1 &icu0 30
 119                                 0x7800 0 0 1 &icu0 135
 120                                 0x7800 0 0 2 &icu0 135
 121                                 0x7800 0 0 3 &icu0 135
 122                         >;
 123                         gpio-reset = <&gpio 21 0>;
 124                         req-mask = <0x3>;
 125                 };
 126         };
 127
 128         ralink_eep {
 129                 compatible = "ralink,eeprom";
 130                 ralink,eeprom = "RT2860.eeprom";
 131         };
 132
 133         gpio-keys-polled {
 134                 compatible = "gpio-keys-polled";
 135                 #address-cells = <1>;
 136                 #size-cells = <0>;
 137                 poll-interval = <100>;
 138
 139                 rfkill {
 140                         label = "rfkill";
 141                         gpios = <&gpio 11 1>;
 142                         linux,code = <0xf7>;
 143                 };
 144                 restart {
 145                         label = "restart";
 146                         gpios = <&gpio 12 1>;
 147                         linux,code = <0x100>;
 148                 };
 149                 reset {
 150                         label = "reset";
 151                         gpios = <&gpio 28 1>;
 152                         linux,code = <0x198>;
 153                 };
 154         };
 155
 156         gpio-leds {
 157                 compatible = "gpio-leds";
 158                 power {
 159                         label = "power";
 160                         gpios = <&gpio 2 1>;
 161                 };
 162                 internet {
 163                         label = "internet";
 164                         gpios = <&gpio 4 1>;
 165                 };
 166                 wlan {
 167                         label = "wlan";
 168                         gpios = <&gpio 10 1>;
 169                 };
 170                 3g {
 171                         label = "3g";
 172                         gpios = <&gpio 15 1>;
 173                 };
 174                 message {
 175                         label = "message";
 176                         gpios = <&gpio 20 1>;
 177                 };
 178         };
 179 };