target/linux/lantiq/dts/ARV7519RW.dtsi

   1 /include/ "vr9.dtsi"
   2
   3 / {
   4         model = "ARV7519RW22 - Astoria Networks ARV7519RW22-A-LT";
   5
   6         chosen {
   7                 bootargs = "console=ttyLTQ0,115200 init=/etc/preinit";
   8         };
   9
  10         memory@0 {
  11                 reg = <0x0 0x8000000>;
  12         };
  13
  14         fpi@10000000 {
  15                 localbus@0 {
  16                         nor-boot@0 {
  17                                 compatible = "lantiq,nor";
  18                                 bank-width = <2>;
  19                                 reg = <0 0x0 0x2000000>, <1 0x2000000 0x2000000>;
  20                                 #address-cells = <1>;
  21                                 #size-cells = <1>;
  22
  23                                 partition@0 {
  24                                         label = "uboot";
  25                                         reg = <0x0 0x60000>;
  26                                         read-only;
  27                                 };
  28
  29                                 partition@60000 {
  30                                         label = "uboot-env";
  31                                         reg = <0x60000 0x20000>;
  32                                         read-only;
  33                                 };
  34
  35                                 partition@80000 {
  36                                         label = "firmware";
  37                                         reg = <0x80000 0x1e00000>;
  38                                 };
  39
  40                                 partition@1e80000 {
  41                                         label = "dsl_fw";
  42                                         reg = <0x1e80000 0x100000>;
  43                                 };
  44
  45                                 boardconfig: partition@1f80000 {
  46                                         label = "boardconfig";
  47                                         reg = <0x1f80000 0x80000>;
  48                                         read-only;
  49                                 };
  50                         };
  51                 };
  52
  53                 gpio: pinmux@E100B10 {
  54                         pinctrl-names = "default";
  55                         pinctrl-0 = <&state_default>;
  56
  57                         state_default: pinmux {
  58                                 mdio {
  59                                         lantiq,groups = "mdio";
  60                                         lantiq,function = "mdio";
  61                                 };
  62                                 pcie-rst {
  63                                         lantiq,pins = "io21";
  64                                         lantiq,pull = <0>;
  65                                         lantiq,output = <1>;
  66                                 };
  67                         };
  68                 };
  69
  70                 eth@E108000 {
  71                         #address-cells = <1>;
  72                         #size-cells = <0>;
  73                         compatible = "lantiq,xrx200-net";
  74                         reg = < 0xE108000 0x3000 /* switch */
  75                                 0xE10B100 0x70 /* mdio */
  76                                 0xE10B1D8 0x30 /* mii */
  77                                 0xE10B308 0x30 /* pmac */
  78                         >;
  79                         interrupt-parent = <&icu0>;
  80                         interrupts = <73 72>;
  81
  82                         lan: interface@0 {
  83                                 compatible = "lantiq,xrx200-pdi";
  84                                 #address-cells = <1>;
  85                                 #size-cells = <0>;
  86                                 reg = <0>;
  87                                 mtd-mac-address = <&boardconfig 0x16>;
  88                                 lantiq,switch;
  89
  90                                 ethernet@0 {
  91                                         compatible = "lantiq,xrx200-pdi-port";
  92                                         reg = <0>;
  93                                         phy-mode = "rgmii";
  94                                         phy-handle = <&phy0>;
  95                                 };
  96                                 ethernet@1 {
  97                                         compatible = "lantiq,xrx200-pdi-port";
  98                                         reg = <4>;
  99                                         phy-mode = "mii";
 100                                         phy-handle = <&phy13>;
 101                                 };
 102                                 ethernet@2 {
 103                                         compatible = "lantiq,xrx200-pdi-port";
 104                                         reg = <5>;
 105                                         phy-mode = "mii";
 106                                         phy-handle = <&phy14>;
 107                                 };
 108                                 ethernet@3 {
 109                                         compatible = "lantiq,xrx200-pdi-port";
 110                                         reg = <2>;
 111                                         phy-mode = "mii";
 112                                         phy-handle = <&phy11>;
 113                                 };
 114                                 ethernet@4 {
 115                                         compatible = "lantiq,xrx200-pdi-port";
 116                                         reg = <3>;
 117                                         phy-mode = "mii";
 118                                         phy-handle = <&phy12>;
 119                                 };
 120                         };
 121
 122                         mdio@0 {
 123                                 #address-cells = <1>;
 124                                 #size-cells = <0>;
 125                                 compatible = "lantiq,xrx200-mdio";
 126                                 phy0: ethernet-phy@0 {
 127                                         reg = <0x0>;
 128                                         compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
 129                                 };
 130                                 phy11: ethernet-phy@11 {
 131                                         reg = <0x11>;
 132                                         compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
 133                                 };
 134                                 phy12: ethernet-phy@12 {
 135                                         reg = <0x12>;
 136                                         compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
 137                                 };
 138                                 phy13: ethernet-phy@13 {
 139                                         reg = <0x13>;
 140                                         compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
 141                                 };
 142                                 phy14: ethernet-phy@14 {
 143                                         reg = <0x14>;
 144                                         compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
 145                                 };
 146                         };
 147                 };
 148
 149                 ifxhcd@E101000 {
 150                         status = "okay";
 151                         gpios = <&gpio 32 0>;
 152                         lantiq,portmask = <0x3>;
 153                 };
 154
 155                 pcie@d900000 {
 156                         status = "disabled";
 157                         compatible = "lantiq,pcie-xway";
 158                 };
 159
 160                 pci@E105400 {
 161                         status = "disabled";
 162                         compatible = "lantiq,pci-xway";
 163                 };
 164         };
 165
 166         gpio-keys-polled {
 167                 compatible = "gpio-keys-polled";
 168                 #address-cells = <1>;
 169                 #size-cells = <0>;
 170                 poll-interval = <100>;
 171
 172                 wps {
 173                         label = "wps";
 174                         gpios = <&gpio 20 1>;
 175                         linux,code = <0x211>;
 176                 };
 177                 reset {
 178                         label = "reset";
 179                         gpios = <&gpio 22 1>;
 180                         linux,code = <0x198>;
 181                 };
 182                 rfkill {
 183                         label = "rfkill";
 184                         gpios = <&gpio 45 1>;
 185                         linux,code = <0xf7>;
 186                 };
 187         };
 188
 189         gpio-leds {
 190                 compatible = "gpio-leds";
 191
 192                 lan_green {
 193                         label = "lan";
 194                         gpios = <&gpio 2 1>;
 195                 };
 196                 message_red {
 197                         label = "message_red";
 198                         gpios = <&gpio 10 1>;
 199                 };
 200                 power_red {
 201                         label = "power";
 202                         gpios = <&gpio 14 1>;
 203                         default-state = "on";
 204                 };
 205                 alarm_blue {
 206                         label = "alarm";
 207                         gpios = <&gpio 15 1>;
 208                 };
 209                 message_orange {
 210                         label = "message_orange";
 211                         gpios = <&gpio 19 1>;
 212                 };
 213                 message_green {
 214                         label = "message_green";
 215                         gpios = <&gpio 28 1>;
 216                 };
 217                 voice_green {
 218                         label = "voice";
 219                         gpios = <&gpio 29 1>;
 220                 };
 221         };
 222 };