target/linux/lantiq/dts/ARV7525PW.dts

   1 /dts-v1/;
   2
   3 #include "danube.dtsi"
   4
   5 / {
   6         model = "ARV7525PW - Speedport W303V Typ A";
   7
   8         chosen {
   9                 bootargs = "console=ttyLTQ0,115200 init=/etc/preinit";
  10         };
  11
  12         aliases {
  13                 led-boot = &power_green;
  14                 led-failsafe = &power_red;
  15                 led-running = &power_green;
  16
  17                 led-dsl = &power_green;
  18                 led-internet = &online;
  19                 led-wifi = &wifi;
  20         };
  21
  22         memory@0 {
  23                 reg = <0x0 0x2000000>;
  24         };
  25
  26         sram@1F000000 {
  27                 vmmc@107000 {
  28                         status = "okay";
  29                         gpios = <&gpio 31 GPIO_ACTIVE_HIGH>;
  30                 };
  31         };
  32
  33         fpi@10000000 {
  34                 localbus@0 {
  35                         nor-boot@0 {
  36                                 compatible = "lantiq,nor";
  37                                 bank-width = <2>;
  38                                 reg = <0 0x0 0x2000000>;
  39                                 #address-cells = <1>;
  40                                 #size-cells = <1>;
  41
  42                                 partitions {
  43                                         compatible = "fixed-partitions";
  44                                         #address-cells = <1>;
  45                                         #size-cells = <1>;
  46
  47                                         partition@0 {
  48                                                 label = "uboot";
  49                                                 reg = <0x00000 0x10000>;
  50                                                 read-only;
  51                                         };
  52
  53                                         partition@10000 {
  54                                                 label = "uboot_env";
  55                                                 reg = <0x10000 0x10000>;
  56                                                 read-only;
  57                                         };
  58
  59                                         partition@20000 {
  60                                                 label = "firmware";
  61                                                 reg = <0x20000 0x3d0000>;
  62                                         };
  63
  64                                         boardconfig: partition@400000 {
  65                                                 label = "board_config";
  66                                                 reg = <0x3f0000 0x10000>;
  67                                                 read-only;
  68                                         };
  69                                 };
  70                         };
  71                 };
  72
  73                 gpio: pinmux@E100B10 {
  74                         pinctrl-names = "default";
  75                         pinctrl-0 = <&state_default>;
  76
  77                         state_default: pinmux {
  78                                 exin {
  79                                         lantiq,groups = "exin1";
  80                                         lantiq,function = "exin";
  81                                 };
  82                                 pci {
  83                                         lantiq,groups = "gnt1", "req1";
  84                                         lantiq,function = "pci";
  85                                 };
  86                         };
  87                 };
  88
  89                 etop@E180000 {
  90                         phy-mode = "mii";
  91                         mtd-mac-address = <&boardconfig 0x16>;
  92                 };
  93         };
  94
  95         gpio-keys-polled {
  96                 compatible = "gpio-keys-polled";
  97                 #address-cells = <1>;
  98                 #size-cells = <0>;
  99                 poll-interval = <100>;
 100
 101                 wps {
 102                         label = "wps";
 103                         gpios = <&gpio 29 GPIO_ACTIVE_LOW>;
 104                         linux,code = <KEY_WPS_BUTTON>;
 105                 };
 106                 reset {
 107                         label = "reset";
 108                         gpios = <&gpio 30 GPIO_ACTIVE_LOW>;
 109                         linux,code = <KEY_RESTART>;
 110                 };
 111         };
 112
 113         gpio-leds {
 114                 compatible = "gpio-leds";
 115                 power_green: power {
 116                         label = "arv7525pw:green:power";
 117                         gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
 118                         default-state = "keep";
 119                 };
 120                 power_red: power1 {
 121                         label = "arv7525pw:red:power";
 122                         gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
 123                 };
 124                 online: online {
 125                         label = "arv7525pw:green:online";
 126                         gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
 127                 };
 128                 voice {
 129                         label = "arv7525pw:green:telefonie";
 130                         gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
 131                 };
 132                 voice2 {
 133                         label = "arv7525pw:red:telefonie";
 134                         gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
 135                 };
 136                 wifi: wifi {
 137                         label = "arv7525pw:green:wlan";
 138                         gpios = <&gpio 9 GPIO_ACTIVE_LOW>;
 139                 };
 140         };
 141 };
 142
 143 &pci0 {
 144         status = "okay";
 145         interrupt-map = <0x7000 0 0 1 &icu0 135 1>;
 146
 147         wifi@0,0 {
 148                 compatible = "pci0,0";
 149                 reg = <0x7000 0 0 0 0>;
 150                 ralink,mtd-eeprom = <&boardconfig 0x410>;
 151         };
 152 };