target/linux/lantiq/dts/FRITZ3370.dts

   1 /dts-v1/;
   2
   3 /include/ "vr9.dtsi"
   4
   5 / {
   6         model = "FRITZ3370 - Fritz!Box WLAN 3370";
   7
   8         chosen {
   9                 bootargs = "console=ttyLTQ0,115200 ubi.mtd=1,512 root=/dev/mtdblock9";
  10
  11                 leds {
  12                         boot = &power_green;
  13                         failsafe = &power_red;
  14                         running = &power_green;
  15
  16                         dsl = &dsl;
  17                         internet = &info_green;
  18                         wifi = &wifi;
  19                 };
  20         };
  21
  22         memory@0 {
  23                 reg = <0x0 0x8000000>;
  24         };
  25
  26         fpi@10000000 {
  27                 localbus@0 {
  28                         nand-parts@0 {
  29                                 compatible = "gen_nand", "lantiq,nand-xway";
  30                                 bank-width = <2>;
  31                                 reg = <1 0x0 0x2000000>;
  32                                 #address-cells = <1>;
  33                                 #size-cells = <1>;
  34
  35                                 partition@0 {
  36                                         label = "kernel";
  37                                         reg = <0x0 0x400000>;
  38                                 };
  39
  40                                 partition@400000 {
  41                                         label = "rootfs_ubi";
  42                                         reg = <0x400000 0x3000000>;
  43                                 };
  44
  45                                 partition@3400000 {
  46                                         label = "vr9_firmware";
  47                                         reg = <0x3400000 0x400000>;
  48                                 };
  49                                 partition@3800000 {
  50                                         label = "reserved";
  51                                         reg = <0x3800000 0x3000000>;
  52                                 };
  53                                 partition@6800000 {
  54                                         label = "config";
  55                                         reg = <0x6800000 0x200000>;
  56                                 };
  57                                 partition@6a00000 {
  58                                         label = "nand-filesystem";
  59                                         reg = <0x6a00000 0x1600000>;
  60                                 };
  61                         };
  62                 };
  63
  64                 gpio: pinmux@E100B10 {
  65                         pinctrl-names = "default";
  66                         pinctrl-0 = <&state_default>;
  67
  68                         state_default: pinmux {
  69                                 mdio {
  70                                         lantiq,groups = "mdio";
  71                                         lantiq,function = "mdio";
  72                                 };
  73                                 nand {
  74                                         lantiq,groups = "nand cle", "nand ale",
  75                                                         "nand rd", "nand cs1", "nand rdy";
  76                                         lantiq,function = "ebu";
  77                                         lantiq,pull = <1>;
  78                                 };
  79                                 phy-rst {
  80                                         lantiq,pins = "io37", "io44";
  81                                         lantiq,pull = <0>;
  82                                         lantiq,open-drain = <0>;
  83                                         lantiq,output = <1>;
  84                                 };
  85                                 pcie-rst {
  86                                         lantiq,pins = "io38";
  87                                         lantiq,pull = <0>;
  88                                         lantiq,output = <1>;
  89                                 };
  90                         };
  91                         pins_spi_default: pins_spi_default {
  92                                 spi_in {
  93                                         lantiq,groups = "spi_di";
  94                                         lantiq,function = "spi";
  95                                 };
  96                                 spi_out {
  97                                         lantiq,groups = "spi_do", "spi_clk",
  98                                                 "spi_cs4";
  99                                         lantiq,function = "spi";
 100                                         lantiq,output = <1>;
 101                                 };
 102                         };
 103                 };
 104
 105                 ifxhcd@E101000 {
 106                         status = "okay";
 107                         gpios = <&gpio 5 0
 108                                 &gpio 14 0>;
 109                         lantiq,portmask = <0x3>;
 110                 };
 111         };
 112
 113         ath9k_eep {
 114                 compatible = "ath9k,eeprom";
 115                 ath,eep-flash = <&ath9k_cal 0x985>;
 116                 ath,eep-endian;
 117                 ath,eep-swap;
 118         };
 119
 120         gphy-xrx200 {
 121                 compatible = "lantiq,phy-xrx200";
 122                 firmware = "lantiq/vr9_phy11g_a1x.bin";
 123                 phys = [ 00 01 ];
 124         };
 125
 126         gpio-keys-polled {
 127                 compatible = "gpio-keys-polled";
 128                 #address-cells = <1>;
 129                 #size-cells = <0>;
 130                 poll-interval = <100>;
 131                 power {
 132                         label = "power";
 133                         gpios = <&gpio 1 0>;
 134                         linux,code = <0x100>;
 135                 };
 136 /*              wifi {
 137                         label = "wifi";
 138                         gpios = <&gpio 29 0>;
 139                         linux,code = <0x101>;
 140                 };*/
 141         };
 142
 143         gpio-leds {
 144                 compatible = "gpio-leds";
 145
 146                 power_green: power {
 147                         label = "fritz3370:green:power";
 148                         gpios = <&gpio 32 1>;
 149                         default-state = "keep";
 150                 };
 151                 power_red: power2 {
 152                         label = "fritz3370:red:power";
 153                         gpios = <&gpio 33 1>;
 154                 };
 155                 info_red {
 156                         label = "fritz3370:red:info";
 157                         gpios = <&gpio 34 1>;
 158                 };
 159                 wifi: wifi {
 160                         label = "fritz3370:green:wlan";
 161                         gpios = <&gpio 35 1>;
 162                 };
 163                 dsl: dsl {
 164                         label = "fritz3370:green:dsl";
 165                         gpios = <&gpio 36 1>;
 166                 };
 167                 lan {
 168                         label = "fritz3370:green:lan";
 169                         gpios = <&gpio 38 1>;
 170                 };
 171                 info_green: info_green {
 172                         label = "fritz3370:green:info";
 173                         gpios = <&gpio 47 1>;
 174                 };
 175         };
 176 };
 177
 178 &spi {
 179         pinctrl-names = "default";
 180         pinctrl-0 = <&pins_spi_default>;
 181
 182         status = "ok";
 183
 184         m25p80@4 {
 185                 #address-cells = <1>;
 186                 #size-cells = <1>;
 187                 compatible = "jedec,spi-nor";
 188                 reg = <4 0>;
 189                 spi-max-frequency = <1000000>;
 190
 191                 ath9k_cal: partition@0 {
 192                         reg = <0x0 0x20000>;
 193                         label = "urlader";
 194                         read-only;
 195                 };
 196
 197                 partition@20000 {
 198                         reg = <0x20000 0x10000>;
 199                         label = "tffs (1)";
 200                         read-only;
 201                 };
 202
 203                 partition@30000 {
 204                         reg = <0x30000 0x10000>;
 205                         label = "tffs (2)";
 206                         read-only;
 207                 };
 208         };
 209 };
 210
 211 &eth0 {
 212         lan: interface@0 {
 213                 compatible = "lantiq,xrx200-pdi";
 214                 #address-cells = <1>;
 215                 #size-cells = <0>;
 216                 reg = <0>;
 217                 mac-address = [ 00 11 22 33 44 55 ];
 218                 lantiq,switch;
 219
 220                 ethernet@0 {
 221                         compatible = "lantiq,xrx200-pdi-port";
 222                         reg = <0>;
 223                         phy-mode = "rgmii";
 224                         phy-handle = <&phy0>;
 225                         gpios = <&gpio 37 0>;
 226                 };
 227                 ethernet@1 {
 228                         compatible = "lantiq,xrx200-pdi-port";
 229                         reg = <1>;
 230                         phy-mode = "rgmii";
 231                         phy-handle = <&phy1>;
 232                         gpios = <&gpio 44 0>;
 233                 };
 234                 ethernet@2 {
 235                         compatible = "lantiq,xrx200-pdi-port";
 236                         reg = <2>;
 237                         phy-mode = "gmii";
 238                         phy-handle = <&phy11>;
 239                 };
 240                 ethernet@3 {
 241                         compatible = "lantiq,xrx200-pdi-port";
 242                         reg = <4>;
 243                         phy-mode = "gmii";
 244                         phy-handle = <&phy13>;
 245                 };
 246         };
 247
 248         mdio@0 {
 249                 #address-cells = <1>;
 250                 #size-cells = <0>;
 251                 compatible = "lantiq,xrx200-mdio";
 252                 phy0: ethernet-phy@0 {
 253                         reg = <0x0>;
 254                         compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
 255                 };
 256                 phy1: ethernet-phy@1 {
 257                         reg = <0x1>;
 258                         compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
 259                 };
 260                 phy11: ethernet-phy@11 {
 261                         reg = <0x11>;
 262                         compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
 263                 };
 264                 phy13: ethernet-phy@13 {
 265                         reg = <0x13>;
 266                         compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
 267                 };
 268         };
 269 };