target/linux/lantiq/dts/FRITZ3370.dts

   1 /dts-v1/;
   2
   3 /include/ "vr9.dtsi"
   4
   5 / {
   6         model = "FRITZ3370 - Fritz!Box WLAN 3370";
   7
   8         chosen {
   9                 bootargs = "console=ttyLTQ0,115200 init=/etc/preinit rootfstype=jffs2";
  10         };
  11
  12         memory@0 {
  13                 reg = <0x0 0x8000000>;
  14         };
  15
  16         fpi@10000000 {
  17                 localbus@0 {
  18                         nand-parts@0 {
  19                                 compatible = "gen_nand", "lantiq,nand-xway";
  20                                 bank-width = <2>;
  21                                 reg = <1 0x0 0x2000000>;
  22                                 #address-cells = <1>;
  23                                 #size-cells = <1>;
  24
  25                                 partition@0 {
  26                                         label = "firmware";
  27                                         reg = <0x00000 0x3400000>;
  28                                 };
  29
  30                                 partition@3400000 {
  31                                         label = "vr9_firmware";
  32                                         reg = <0x3400000 0x400000>;
  33                                 };
  34                                 partition@3800000 {
  35                                         label = "reserved";
  36                                         reg = <0x3800000 0x3000000>;
  37                                 };
  38                                 partition@6800000 {
  39                                         label = "config";
  40                                         reg = <0x6800000 0x200000>;
  41                                 };
  42                                 partition@6a00000 {
  43                                         label = "nand-filesystem";
  44                                         reg = <0x6a00000 0x1600000>;
  45                                 };
  46                         };
  47                 };
  48
  49                 gpio: pinmux@E100B10 {
  50                         pinctrl-names = "default";
  51                         pinctrl-0 = <&state_default>;
  52
  53                         state_default: pinmux {
  54                                 spi {
  55                                         lantiq,groups = "spi", "spi_cs4";
  56                                         lantiq,function = "gpio";
  57                                 };
  58                                 nand_out {
  59                                         lantiq,groups = "nand cle", "nand ale", "nand rd", "ebu a23", "ebu a24";
  60                                         lantiq,function = "ebu";
  61                                         lantiq,direction = <1>;
  62                                         lantiq,pull = <0>;
  63                                 };
  64                                 nand_in {
  65                                         lantiq,groups = "nand rdy";
  66                                         lantiq,function = "ebu";
  67                                         lantiq,direction = <0>;
  68                                         lantiq,open-drain = <1>;
  69                                         lantiq,pull = <2>;
  70                                 };
  71                                 mdio {
  72                                         lantiq,groups = "mdio";
  73                                         lantiq,function = "mdio";
  74                                 };
  75                                 phy-rst {
  76                                         lantiq,pins = "io37", "io44";
  77                                         lantiq,pull = <0>;
  78                                         lantiq,open-drain = <0>;
  79                                         lantiq,output = <1>;
  80                                 };
  81                                 pcie-rst {
  82                                         lantiq,pins = "io38";
  83                                         lantiq,pull = <0>;
  84                                         lantiq,output = <1>;
  85                                 };
  86                         };
  87                 };
  88
  89                 eth@E108000 {
  90                         #address-cells = <1>;
  91                         #size-cells = <0>;
  92                         compatible = "lantiq,xrx200-net";
  93                         reg = < 0xE108000 0x3000 /* switch */
  94                                 0xE10B100 0x70 /* mdio */
  95                                 0xE10B1D8 0x30 /* mii */
  96                                 0xE10B308 0x30 /* pmac */
  97                         >;
  98                         interrupt-parent = <&icu0>;
  99                         interrupts = <73 72>;
 100
 101                         lan: interface@0 {
 102                                 compatible = "lantiq,xrx200-pdi";
 103                                 #address-cells = <1>;
 104                                 #size-cells = <0>;
 105                                 reg = <0>;
 106                                 mac-address = [ 00 11 22 33 44 55 ];
 107
 108                                 ethernet@0 {
 109                                         compatible = "lantiq,xrx200-pdi-port";
 110                                         reg = <0>;
 111                                         phy-mode = "rgmii";
 112                                         phy-handle = <&phy0>;
 113                                         gpios = <&gpio 37 0>;
 114                                 };
 115                                 ethernet@1 {
 116                                         compatible = "lantiq,xrx200-pdi-port";
 117                                         reg = <1>;
 118                                         phy-mode = "rgmii";
 119                                         phy-handle = <&phy1>;
 120                                         gpios = <&gpio 44 0>;
 121                                 };
 122                                 ethernet@2 {
 123                                         compatible = "lantiq,xrx200-pdi-port";
 124                                         reg = <2>;
 125                                         phy-mode = "gmii";
 126                                         phy-handle = <&phy11>;
 127                                 };
 128                                 ethernet@3 {
 129                                         compatible = "lantiq,xrx200-pdi-port";
 130                                         reg = <4>;
 131                                         phy-mode = "gmii";
 132                                         phy-handle = <&phy13>;
 133                                 };
 134                         };
 135
 136                         mdio@0 {
 137                                 #address-cells = <1>;
 138                                 #size-cells = <0>;
 139                                 compatible = "lantiq,xrx200-mdio";
 140                                 phy0: ethernet-phy@0 {
 141                                         reg = <0x0>;
 142                                         compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
 143                                 };
 144                                 phy1: ethernet-phy@1 {
 145                                         reg = <0x1>;
 146                                         compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
 147                                 };
 148                                 phy11: ethernet-phy@11 {
 149                                         reg = <0x11>;
 150                                         compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
 151                                 };
 152                                 phy13: ethernet-phy@13 {
 153                                         reg = <0x13>;
 154                                         compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
 155                                 };
 156                         };
 157                 };
 158
 159                 ifxhcd@E101000 {
 160                         status = "okay";
 161                         gpios = <&gpio 5 0
 162                                 &gpio 14 0>;
 163                         lantiq,portmask = <0x3>;
 164                 };
 165         };
 166
 167         spi {
 168                 #address-cells = <1>;
 169                 #size-cells = <1>;
 170
 171                 compatible = "spi-gpio";
 172
 173                 gpio-miso = <&gpio 16 0>;
 174                 gpio-mosi = <&gpio 17 0>;
 175                 gpio-sck = <&gpio 18 0>;
 176                 num-chipselects = <1>;
 177                 cs-gpios = <&gpio 10 1>;
 178
 179                 m25p80@0 {
 180                         #address-cells = <1>;
 181                         #size-cells = <1>;
 182                         compatible = "mx25l2005a";
 183                         reg = <0 0>;
 184                         linux,modalias = "m25p80", "mx25l2005a";
 185                         spi-max-frequency = <1000000>;
 186
 187                         ath9k_cal: partition@0 {
 188                                 reg = <0x0 0x20000>;
 189                                 label = "urlader";
 190                                 read-only;
 191                         };
 192
 193                         partition@20000 {
 194                                 reg = <0x20000 0x10000>;
 195                                 label = "tffs (1)";
 196                                 read-only;
 197                         };
 198
 199                         partition@30000 {
 200                                 reg = <0x30000 0x10000>;
 201                                 label = "tffs (2)";
 202                                 read-only;
 203                         };
 204                 };
 205         };
 206
 207         ath9k_eep {
 208                 compatible = "ath9k,eeprom-mtd";
 209                 ath,eep-flash = <&ath9k_cal 0x985>;
 210                 ath,eep-endian;
 211                 ath,eep-swap;
 212         };
 213
 214         gphy-xrx200 {
 215                 compatible = "lantiq,phy-xrx200";
 216                 firmware = "lantiq/vr9_phy11g_a1x.bin";
 217                 phys = [ 00 01 ];
 218         };
 219
 220         gpio-keys-polled {
 221                 compatible = "gpio-keys-polled";
 222                 #address-cells = <1>;
 223                 #size-cells = <0>;
 224                 poll-interval = <100>;
 225                 power {
 226                         label = "power";
 227                         gpios = <&gpio 1 0>;
 228                         linux,code = <0x100>;
 229                 };
 230 /*              wifi {
 231                         label = "wifi";
 232                         gpios = <&gpio 29 0>;
 233                         linux,code = <0x101>;
 234                 };*/
 235         };
 236
 237         gpio-leds {
 238                 compatible = "gpio-leds";
 239
 240                 power {
 241                         label = "power";
 242                         gpios = <&gpio 32 1>;
 243                 };
 244                 power2 {
 245                         label = "power2";
 246                         gpios = <&gpio 33 1>;
 247                 };
 248                 info_red {
 249                         label = "info_red";
 250                         gpios = <&gpio 34 1>;
 251                 };
 252                 wifi {
 253                         label = "wifi";
 254                         gpios = <&gpio 35 1>;
 255                 };
 256                 dsl {
 257                         label = "dsl";
 258                         gpios = <&gpio 36 1>;
 259                 };
 260                 lan {
 261                         label = "lan";
 262                         gpios = <&gpio 38 1>;
 263                 };
 264                 info_green {
 265                         label = "info_green";
 266                         gpios = <&gpio 47 1>;
 267                 };
 268         };
 269 };