target/linux/lantiq/dts/TDW8970.dts

   1 /dts-v1/;
   2
   3 /include/ "vr9.dtsi"
   4
   5 / {
   6         model = "TDW8970 - TP-LINK TD-W8970";
   7
   8         chosen {
   9                 bootargs = "console=ttyLTQ0,115200 init=/etc/preinit";
  10         };
  11
  12         memory@0 {
  13                 reg = <0x0 0x4000000>;
  14         };
  15
  16         fpi@10000000 {
  17                 gpio: pinmux@E100B10 {
  18                         pinctrl-names = "default";
  19                         pinctrl-0 = <&state_default>;
  20
  21                         state_default: pinmux {
  22                                 mdio {
  23                                         lantiq,groups = "mdio";
  24                                         lantiq,function = "mdio";
  25                                 };
  26                                 gphy-leds {
  27                                         lantiq,groups = "gphy0 led1", "gphy1 led1";
  28                                         lantiq,function = "gphy";
  29                                         lantiq,pull = <2>;
  30                                         lantiq,open-drain = <0>;
  31                                         lantiq,output = <1>;
  32                                 };
  33                                 phy-rst {
  34                                         lantiq,pins = "io42";
  35                                         lantiq,pull = <0>;
  36                                         lantiq,open-drain = <0>;
  37                                         lantiq,output = <1>;
  38                                 };
  39                                 spi-in {
  40                                         lantiq,pins = "io16";
  41                                         lantiq,open-drain = <1>;
  42                                         lantiq,pull = <2>;
  43                                 };
  44                                 spi-out {
  45                                         lantiq,pins = "io10", "io17", "io18", "io21";
  46                                         lantiq,open-drain = <0>;
  47                                         lantiq,pull = <2>;
  48                                 };
  49                                 pcie-rst {
  50                                         lantiq,pins = "io38";
  51                                         lantiq,pull = <0>;
  52                                         lantiq,output = <1>;
  53                                 };
  54                         };
  55                 };
  56
  57                 eth@E108000 {
  58                         #address-cells = <1>;
  59                         #size-cells = <0>;
  60                         compatible = "lantiq,xrx200-net";
  61                         reg = < 0xE108000 0x3000 /* switch */
  62                                 0xE10B100 0x70 /* mdio */
  63                                 0xE10B1D8 0x30 /* mii */
  64                                 0xE10B308 0x30 /* pmac */
  65                         >;
  66                         interrupt-parent = <&icu0>;
  67                         interrupts = <73 72>;
  68
  69                         lan: interface@0 {
  70                                 compatible = "lantiq,xrx200-pdi";
  71                                 #address-cells = <1>;
  72                                 #size-cells = <0>;
  73                                 reg = <0>;
  74                                 mtd-mac-address = <&ath9k_cal 0xf100>;
  75                                 lantiq,switch;
  76
  77                                 ethernet@0 {
  78                                         compatible = "lantiq,xrx200-pdi-port";
  79                                         reg = <0>;
  80                                         phy-mode = "rgmii";
  81                                         phy-handle = <&phy0>;
  82                                         // gpios = <&gpio 42 1>;
  83                                 };
  84                                 ethernet@5 {
  85                                         compatible = "lantiq,xrx200-pdi-port";
  86                                         reg = <5>;
  87                                         phy-mode = "rgmii";
  88                                         phy-handle = <&phy5>;
  89                                 };
  90                                 ethernet@2 {
  91                                         compatible = "lantiq,xrx200-pdi-port";
  92                                         reg = <2>;
  93                                         phy-mode = "gmii";
  94                                         phy-handle = <&phy11>;
  95                                 };
  96                                 ethernet@3 {
  97                                         compatible = "lantiq,xrx200-pdi-port";
  98                                         reg = <4>;
  99                                         phy-mode = "gmii";
 100                                         phy-handle = <&phy13>;
 101                                 };
 102                         };
 103
 104                         mdio@0 {
 105                                 #address-cells = <1>;
 106                                 #size-cells = <0>;
 107                                 compatible = "lantiq,xrx200-mdio";
 108                                 phy0: ethernet-phy@0 {
 109                                         reg = <0x0>;
 110                                         compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
 111                                 };
 112                                 phy5: ethernet-phy@5 {
 113                                         reg = <0x5>;
 114                                         compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
 115                                 };
 116                                 phy11: ethernet-phy@11 {
 117                                         reg = <0x11>;
 118                                         compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
 119                                 };
 120                                 phy13: ethernet-phy@13 {
 121                                         reg = <0x13>;
 122                                         compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
 123                                 };
 124                         };
 125                 };
 126
 127                 ifxhcd@E101000 {
 128                         status = "okay";
 129                         gpios = <&gpio 33 0>;
 130                         lantiq,portmask = <0x3>;
 131                 };
 132
 133                 ifxhcd@E106000 {
 134                         status = "okay";
 135                         gpios = <&gpio 33 0>;
 136                 };
 137         };
 138
 139         gphy-xrx200 {
 140                 compatible = "lantiq,phy-xrx200";
 141                 firmware = "lantiq/vr9_phy11g_a2x.bin";
 142                 phys = [ 00 01 ];
 143         };
 144
 145         pcie {
 146                 compatible = "lantiq,pcie-xway";
 147         };
 148
 149         spi {
 150                 #address-cells = <1>;
 151                 #size-cells = <1>;
 152
 153                 compatible = "spi-gpio";
 154
 155                 gpio-miso = <&gpio 16 0>;
 156                 gpio-mosi = <&gpio 17 0>;
 157                 gpio-sck = <&gpio 18 0>;
 158                 num-chipselects = <1>;
 159                 cs-gpios = <&gpio 10 1>;
 160
 161                 m25p80@0 {
 162                         #address-cells = <1>;
 163                         #size-cells = <1>;
 164                         compatible = "en25q64", "m25p80";
 165                         reg = <0 0>;
 166                         linux,modalias = "en25q64";
 167                         spi-max-frequency = <1000000>;
 168
 169                         partition@0 {
 170                                 reg = <0x0 0x20000>;
 171                                 label = "u-boot";
 172                                 read-only;
 173                         };
 174
 175                         partition@20000 {
 176                                 reg = <0x20000 0x6a0000>;
 177                                 label = "firmware";
 178                         };
 179
 180                         partition@6c0000 {
 181                                 reg = <0x6c0000 0x100000>;
 182                                 label = "dsl_fw";
 183                         };
 184
 185                         partition@7c0000 {
 186                                 reg = <0x7c0000 0x10000>;
 187                                 label = "config";
 188                                 read-only;
 189                         };
 190
 191                         ath9k_cal: partition@7d0000 {
 192                                 reg = <0x7d0000 0x30000>;
 193                                 label = "boardconfig";
 194                                 read-only;
 195                         };
 196                 };
 197         };
 198
 199         ath9k_eep {
 200                 compatible = "ath9k,eeprom";
 201                 ath,eep-flash = <&ath9k_cal 0x21000>;
 202                 ath,mac-offset = <0xf100>;
 203                 ath,mac-increment;
 204                 ath,led-pin = <0>;
 205         };
 206
 207         gpio-keys-polled {
 208                 compatible = "gpio-keys-polled";
 209                 #address-cells = <1>;
 210                 #size-cells = <0>;
 211                 poll-interval = <100>;
 212                 reset {
 213                         label = "reset";
 214                         gpios = <&gpio 0 1>;
 215                         linux,code = <0x198>;
 216                 };
 217
 218                 wifi {
 219                         label = "wifi";
 220                         gpios = <&gpio 9 0>;
 221                         linux,code = <0xf7>;
 222                         linux,input-type = <5>; /* EV_SW */
 223                 };
 224
 225                 wps {
 226                         label = "wps";
 227                         gpios = <&gpio 39 1>;
 228                         linux,code = <0x211>;
 229                 };
 230         };
 231
 232         gpio-leds {
 233                 compatible = "gpio-leds";
 234
 235                 dsl {
 236                         label = "dsl";
 237                         gpios = <&gpio 4 0>;
 238                 };
 239                 internet {
 240                         label = "internet";
 241                         gpios = <&gpio 5 0>;
 242                 };
 243                 usb0 {
 244                         label = "usb";
 245                         gpios = <&gpio 19 0>;
 246                 };
 247                 usb2 {
 248                         label = "usb2";
 249                         gpios = <&gpio 20 0>;
 250                 };
 251                 wps {
 252                         label = "wps";
 253                         gpios = <&gpio 37 0>;
 254                 };
 255         };
 256 };