target/linux/lantiq/dts/TDW89X0.dtsi

   1 /include/ "vr9.dtsi"
   2
   3 / {
   4         chosen {
   5                 bootargs = "console=ttyLTQ0,115200 init=/etc/preinit";
   6         };
   7
   8         memory@0 {
   9                 reg = <0x0 0x4000000>;
  10         };
  11
  12         fpi@10000000 {
  13                 gpio: pinmux@E100B10 {
  14                         pinctrl-names = "default";
  15                         pinctrl-0 = <&state_default>;
  16
  17                         state_default: pinmux {
  18                                 mdio {
  19                                         lantiq,groups = "mdio";
  20                                         lantiq,function = "mdio";
  21                                 };
  22                                 gphy-leds {
  23                                         lantiq,groups = "gphy0 led1", "gphy1 led1";
  24                                         lantiq,function = "gphy";
  25                                         lantiq,pull = <2>;
  26                                         lantiq,open-drain = <0>;
  27                                         lantiq,output = <1>;
  28                                 };
  29                                 phy-rst {
  30                                         lantiq,pins = "io42";
  31                                         lantiq,pull = <0>;
  32                                         lantiq,open-drain = <0>;
  33                                         lantiq,output = <1>;
  34                                 };
  35                                 spi-in {
  36                                         lantiq,pins = "io16";
  37                                         lantiq,open-drain = <1>;
  38                                         lantiq,pull = <2>;
  39                                 };
  40                                 spi-out {
  41                                         lantiq,pins = "io10", "io17", "io18", "io21";
  42                                         lantiq,open-drain = <0>;
  43                                         lantiq,pull = <2>;
  44                                 };
  45                                 pcie-rst {
  46                                         lantiq,pins = "io38";
  47                                         lantiq,pull = <0>;
  48                                         lantiq,output = <1>;
  49                                 };
  50                         };
  51                 };
  52
  53                 eth@E108000 {
  54                         #address-cells = <1>;
  55                         #size-cells = <0>;
  56                         compatible = "lantiq,xrx200-net";
  57                         reg = < 0xE108000 0x3000 /* switch */
  58                                 0xE10B100 0x70 /* mdio */
  59                                 0xE10B1D8 0x30 /* mii */
  60                                 0xE10B308 0x30 /* pmac */
  61                         >;
  62                         interrupt-parent = <&icu0>;
  63                         interrupts = <73 72>;
  64
  65                         lan: interface@0 {
  66                                 compatible = "lantiq,xrx200-pdi";
  67                                 #address-cells = <1>;
  68                                 #size-cells = <0>;
  69                                 reg = <0>;
  70                                 mtd-mac-address = <&ath9k_cal 0xf100>;
  71                                 lantiq,switch;
  72
  73                                 ethernet@0 {
  74                                         compatible = "lantiq,xrx200-pdi-port";
  75                                         reg = <0>;
  76                                         phy-mode = "rgmii";
  77                                         phy-handle = <&phy0>;
  78                                         // gpios = <&gpio 42 1>;
  79                                 };
  80                                 ethernet@5 {
  81                                         compatible = "lantiq,xrx200-pdi-port";
  82                                         reg = <5>;
  83                                         phy-mode = "rgmii";
  84                                         phy-handle = <&phy5>;
  85                                 };
  86                                 ethernet@2 {
  87                                         compatible = "lantiq,xrx200-pdi-port";
  88                                         reg = <2>;
  89                                         phy-mode = "gmii";
  90                                         phy-handle = <&phy11>;
  91                                 };
  92                                 ethernet@3 {
  93                                         compatible = "lantiq,xrx200-pdi-port";
  94                                         reg = <4>;
  95                                         phy-mode = "gmii";
  96                                         phy-handle = <&phy13>;
  97                                 };
  98                         };
  99
 100                         mdio@0 {
 101                                 #address-cells = <1>;
 102                                 #size-cells = <0>;
 103                                 compatible = "lantiq,xrx200-mdio";
 104                                 phy0: ethernet-phy@0 {
 105                                         reg = <0x0>;
 106                                         compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
 107                                 };
 108                                 phy5: ethernet-phy@5 {
 109                                         reg = <0x5>;
 110                                         compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
 111                                 };
 112                                 phy11: ethernet-phy@11 {
 113                                         reg = <0x11>;
 114                                         compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
 115                                 };
 116                                 phy13: ethernet-phy@13 {
 117                                         reg = <0x13>;
 118                                         compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
 119                                 };
 120                         };
 121                 };
 122
 123                 ifxhcd@E101000 {
 124                         status = "okay";
 125                         gpios = <&gpio 33 0>;
 126                         lantiq,portmask = <0x3>;
 127                 };
 128
 129                 ifxhcd@E106000 {
 130                         status = "okay";
 131                         gpios = <&gpio 33 0>;
 132                 };
 133         };
 134
 135         gphy-xrx200 {
 136                 compatible = "lantiq,phy-xrx200";
 137                 firmware = "lantiq/vr9_phy11g_a2x.bin";
 138                 phys = [ 00 01 ];
 139         };
 140
 141         pcie {
 142                 compatible = "lantiq,pcie-xway";
 143         };
 144
 145         spi {
 146                 #address-cells = <1>;
 147                 #size-cells = <1>;
 148
 149                 compatible = "spi-gpio";
 150
 151                 gpio-miso = <&gpio 16 0>;
 152                 gpio-mosi = <&gpio 17 0>;
 153                 gpio-sck = <&gpio 18 0>;
 154                 num-chipselects = <1>;
 155                 cs-gpios = <&gpio 10 1>;
 156
 157                 m25p80@0 {
 158                         #address-cells = <1>;
 159                         #size-cells = <1>;
 160                         compatible = "jedec,spi-nor";
 161                         reg = <0 0>;
 162                         spi-max-frequency = <1000000>;
 163
 164                         partition@0 {
 165                                 reg = <0x0 0x20000>;
 166                                 label = "u-boot";
 167                                 read-only;
 168                         };
 169
 170                         partition@20000 {
 171                                 reg = <0x20000 0x6a0000>;
 172                                 label = "firmware";
 173                         };
 174
 175                         partition@6c0000 {
 176                                 reg = <0x6c0000 0x100000>;
 177                                 label = "dsl_fw";
 178                         };
 179
 180                         partition@7c0000 {
 181                                 reg = <0x7c0000 0x10000>;
 182                                 label = "config";
 183                                 read-only;
 184                         };
 185
 186                         ath9k_cal: partition@7d0000 {
 187                                 reg = <0x7d0000 0x30000>;
 188                                 label = "boardconfig";
 189                                 read-only;
 190                         };
 191                 };
 192         };
 193
 194         ath9k_eep {
 195                 compatible = "ath9k,eeprom";
 196                 ath,eep-flash = <&ath9k_cal 0x21000>;
 197                 ath,mac-offset = <0xf100>;
 198                 ath,mac-increment;
 199                 ath,led-pin = <0>;
 200         };
 201
 202         gpio-keys-polled {
 203                 compatible = "gpio-keys-polled";
 204                 #address-cells = <1>;
 205                 #size-cells = <0>;
 206                 poll-interval = <100>;
 207                 reset {
 208                         label = "reset";
 209                         gpios = <&gpio 0 1>;
 210                         linux,code = <0x198>;
 211                 };
 212
 213                 wifi {
 214                         label = "wifi";
 215                         gpios = <&gpio 9 0>;
 216                         linux,code = <0xf7>;
 217                         linux,input-type = <5>; /* EV_SW */
 218                 };
 219
 220                 wps {
 221                         label = "wps";
 222                         gpios = <&gpio 39 1>;
 223                         linux,code = <0x211>;
 224                 };
 225         };
 226
 227         gpio-leds {
 228                 compatible = "gpio-leds";
 229
 230                 dsl {
 231                         label = "dsl";
 232                         gpios = <&gpio 4 0>;
 233                 };
 234                 internet {
 235                         label = "internet";
 236                         gpios = <&gpio 5 0>;
 237                 };
 238                 usb0 {
 239                         label = "usb";
 240                         gpios = <&gpio 19 0>;
 241                 };
 242                 usb2 {
 243                         label = "usb2";
 244                         gpios = <&gpio 20 0>;
 245                 };
 246                 wps {
 247                         label = "wps";
 248                         gpios = <&gpio 37 0>;
 249                 };
 250         };
 251 };