target/linux/lantiq/dts/TDW89X0.dtsi

   1 /include/ "vr9.dtsi"
   2
   3 / {
   4         chosen {
   5                 bootargs = "console=ttyLTQ0,115200 init=/etc/preinit";
   6
   7                 leds {
   8                         /* the power led can't be controlled, use the wps led instead */
   9                         boot = &wps;
  10                         failsafe = &wps;
  11
  12                         dsl = &dsl;
  13                         internet = &internet;
  14                         usb = &usb0;
  15                         usb2 = &usb2;
  16                 };
  17         };
  18
  19         memory@0 {
  20                 reg = <0x0 0x4000000>;
  21         };
  22
  23         cputemp@0 {
  24                 compatible = "lantiq,cputemp";
  25         };
  26
  27         fpi@10000000 {
  28                 gpio: pinmux@E100B10 {
  29                         pinctrl-names = "default";
  30                         pinctrl-0 = <&state_default>;
  31
  32                         state_default: pinmux {
  33                                 mdio {
  34                                         lantiq,groups = "mdio";
  35                                         lantiq,function = "mdio";
  36                                 };
  37                                 gphy-leds {
  38                                         lantiq,groups = "gphy0 led1", "gphy1 led1";
  39                                         lantiq,function = "gphy";
  40                                         lantiq,pull = <2>;
  41                                         lantiq,open-drain = <0>;
  42                                         lantiq,output = <1>;
  43                                 };
  44                                 phy-rst {
  45                                         lantiq,pins = "io42";
  46                                         lantiq,pull = <0>;
  47                                         lantiq,open-drain = <0>;
  48                                         lantiq,output = <1>;
  49                                 };
  50                                 pcie-rst {
  51                                         lantiq,pins = "io38";
  52                                         lantiq,pull = <0>;
  53                                         lantiq,output = <1>;
  54                                 };
  55                         };
  56                         pins_spi_default: pins_spi_default {
  57                                 spi_in {
  58                                         lantiq,groups = "spi_di";
  59                                         lantiq,function = "spi";
  60                                 };
  61                                 spi_out {
  62                                         lantiq,groups = "spi_do", "spi_clk",
  63                                                 "spi_cs4";
  64                                         lantiq,function = "spi";
  65                                         lantiq,output = <1>;
  66                                 };
  67                         };
  68                 };
  69
  70                 ifxhcd@E101000 {
  71                         status = "okay";
  72                         gpios = <&gpio 33 0>;
  73                         lantiq,portmask = <0x3>;
  74                 };
  75
  76                 ifxhcd@E106000 {
  77                         status = "okay";
  78                         gpios = <&gpio 33 0>;
  79                 };
  80         };
  81
  82         gphy-xrx200 {
  83                 compatible = "lantiq,phy-xrx200";
  84                 firmware = "lantiq/vr9_phy11g_a2x.bin";
  85                 phys = [ 00 01 ];
  86         };
  87
  88         ath9k_eep {
  89                 compatible = "ath9k,eeprom";
  90                 ath,eep-flash = <&ath9k_cal 0x21000>;
  91                 ath,mac-offset = <0xf100>;
  92                 ath,mac-increment = <2>;
  93                 ath,led-pin = <0>;
  94                 ath,disable-5ghz;
  95                 ath,led-active-high;
  96         };
  97
  98         gpio-keys-polled {
  99                 compatible = "gpio-keys-polled";
 100                 #address-cells = <1>;
 101                 #size-cells = <0>;
 102                 poll-interval = <100>;
 103                 reset {
 104                         label = "reset";
 105                         gpios = <&gpio 0 1>;
 106                         linux,code = <0x198>;
 107                 };
 108
 109                 wifi {
 110                         label = "wifi";
 111                         gpios = <&gpio 9 0>;
 112                         linux,code = <0xf7>;
 113                         linux,input-type = <5>; /* EV_SW */
 114                 };
 115
 116                 wps {
 117                         label = "wps";
 118                         gpios = <&gpio 39 1>;
 119                         linux,code = <0x211>;
 120                 };
 121         };
 122
 123         gpio-leds {
 124                 compatible = "gpio-leds";
 125                 /*
 126                         power is not controllable via gpio
 127         */
 128                 dsl: dsl {
 129                         label = "tdw89x0:green:dsl";
 130                         gpios = <&gpio 4 0>;
 131                 };
 132                 internet: internet {
 133                         label = "tdw89x0:green:internet";
 134                         gpios = <&gpio 5 0>;
 135                 };
 136                 usb0: usb0 {
 137                         label = "tdw89x0:green:usb";
 138                         gpios = <&gpio 19 0>;
 139                 };
 140                 usb2: usb2 {
 141                         label = "tdw89x0:green:usb2";
 142                         gpios = <&gpio 20 0>;
 143                 };
 144                 wps: wps {
 145                         label = "tdw89x0:green:wps";
 146                         gpios = <&gpio 37 0>;
 147                 };
 148         };
 149 };
 150
 151 &spi {
 152         pinctrl-names = "default";
 153         pinctrl-0 = <&pins_spi_default>;
 154
 155         status = "ok";
 156
 157         m25p80@4 {
 158                 #address-cells = <1>;
 159                 #size-cells = <1>;
 160                 compatible = "jedec,spi-nor";
 161                 reg = <4 0>;
 162                 spi-max-frequency = <33250000>;
 163                 m25p,fast-read;
 164
 165                 partitions {
 166                         compatible = "fixed-partitions";
 167                         #address-cells = <1>;
 168                         #size-cells = <1>;
 169
 170                         partition@0 {
 171                                 reg = <0x0 0x20000>;
 172                                 label = "u-boot";
 173                                 read-only;
 174                         };
 175
 176                         partition@20000 {
 177                                 reg = <0x20000 0x7a0000>;
 178                                 label = "firmware";
 179                         };
 180
 181                         partition@7c0000 {
 182                                 reg = <0x7c0000 0x10000>;
 183                                 label = "config";
 184                                 read-only;
 185                         };
 186
 187                         ath9k_cal: partition@7d0000 {
 188                                 reg = <0x7d0000 0x30000>;
 189                                 label = "boardconfig";
 190                                 read-only;
 191                         };
 192                 };
 193         };
 194 };
 195
 196 &eth0 {
 197         lan: interface@0 {
 198                 compatible = "lantiq,xrx200-pdi";
 199                 #address-cells = <1>;
 200                 #size-cells = <0>;
 201                 reg = <0>;
 202                 mtd-mac-address = <&ath9k_cal 0xf100>;
 203                 lantiq,switch;
 204
 205                 ethernet@0 {
 206                         compatible = "lantiq,xrx200-pdi-port";
 207                         reg = <0>;
 208                         phy-mode = "rgmii";
 209                         phy-handle = <&phy0>;
 210                         // gpios = <&gpio 42 1>;
 211                 };
 212                 ethernet@5 {
 213                         compatible = "lantiq,xrx200-pdi-port";
 214                         reg = <5>;
 215                         phy-mode = "rgmii";
 216                         phy-handle = <&phy5>;
 217                 };
 218                 ethernet@2 {
 219                         compatible = "lantiq,xrx200-pdi-port";
 220                         reg = <2>;
 221                         phy-mode = "gmii";
 222                         phy-handle = <&phy11>;
 223                 };
 224                 ethernet@3 {
 225                         compatible = "lantiq,xrx200-pdi-port";
 226                         reg = <4>;
 227                         phy-mode = "gmii";
 228                         phy-handle = <&phy13>;
 229                 };
 230         };
 231
 232         mdio@0 {
 233                 #address-cells = <1>;
 234                 #size-cells = <0>;
 235                 compatible = "lantiq,xrx200-mdio";
 236                 phy0: ethernet-phy@0 {
 237                         reg = <0x0>;
 238                         compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
 239                 };
 240                 phy5: ethernet-phy@5 {
 241                         reg = <0x5>;
 242                         compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
 243                 };
 244                 phy11: ethernet-phy@11 {
 245                         reg = <0x11>;
 246                         compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
 247                 };
 248                 phy13: ethernet-phy@13 {
 249                         reg = <0x13>;
 250                         compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
 251                 };
 252         };
 253 };