target/linux/lantiq/dts/VG3503J.dts

   1 /dts-v1/;
   2
   3 #include "vr9.dtsi"
   4
   5 #include <dt-bindings/input/input.h>
   6
   7 / {
   8         model = "VG3503J - BT OpenReach VDSL Modem";
   9
  10         aliases {
  11                 led-boot = &power_green;
  12                 led-failsafe = &power_red;
  13                 led-running = &power_green;
  14
  15                 led-internet = &dsl;
  16         };
  17
  18         memory@0 {
  19                 reg = <0x0 0x2000000>;
  20         };
  21
  22         fpi@10000000 {
  23                 localbus@0 {
  24                         ranges = <0 0 0x0 0x3ffffff>;
  25                         nor-boot@0 {
  26                                 compatible = "lantiq,nor";
  27                                 bank-width = <2>;
  28                                 reg = <0 0x0 0x2000000>;
  29                                 #address-cells = <1>;
  30                                 #size-cells = <1>;
  31
  32                                 partitions {
  33                                         compatible = "fixed-partitions";
  34                                         #address-cells = <1>;
  35                                         #size-cells = <1>;
  36
  37                                         partition@0 {
  38                                                 label = "uboot";
  39                                                 reg = <0x00000 0x20000>;
  40                                         };
  41
  42                                         partition@20000 {
  43                                                 label = "firmware";
  44                                                 reg = <0x20000 0x7d0000>;
  45                                         };
  46
  47                                         partition@7f0000 {
  48                                                 label = "uboot-env";
  49                                                 reg = <0x7f0000 0x10000>;
  50                                         };
  51                                 };
  52                         };
  53                 };
  54
  55                 gpio: pinmux@E100B10 {
  56                         pinctrl-names = "default";
  57                         pinctrl-0 = <&state_default>;
  58
  59                         state_default: pinmux {
  60                                 mdio {
  61                                         lantiq,groups = "mdio";
  62                                         lantiq,function = "mdio";
  63                                 };
  64                                 gphy-leds {
  65                                         lantiq,groups = "gphy0 led0", "gphy0 led1",
  66                                                         "gphy0 led2", "gphy1 led0",
  67                                                         "gphy1 led1", "gphy1 led2";
  68                                         lantiq,function = "gphy";
  69                                         lantiq,pull = <2>;
  70                                         lantiq,open-drain = <0>;
  71                                         lantiq,output = <1>;
  72                                 };
  73                         };
  74                 };
  75         };
  76
  77         gphy-xrx200 {
  78                 compatible = "lantiq,phy-xrx200";
  79                 firmware1 = "lantiq/vr9_phy11g_a1x.bin";        /*VR9 1.1*/
  80                 firmware2 = "lantiq/vr9_phy11g_a2x.bin";        /*VR9 1.2*/
  81                 phys = [ 00 01 ];
  82         };
  83
  84         gpio-keys-polled {
  85                 compatible = "gpio-keys-polled";
  86                 #address-cells = <1>;
  87                 #size-cells = <0>;
  88                 poll-interval = <100>;
  89                 reset {
  90                         label = "reset";
  91                         gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
  92                         linux,code = <KEY_RESTART>;
  93                 };
  94         };
  95
  96         gpio-leds {
  97                 compatible = "gpio-leds";
  98
  99                 power_red: power2 {
 100                         label = "vg3503j:red:power";
 101                         gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
 102                 };
 103                 dsl: dsl {
 104                         label = "vg3503j:green:dsl";
 105                         gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
 106                 };
 107                 power_green: power {
 108                         label = "vg3503j:green:power";
 109                         gpios = <&gpio 28 GPIO_ACTIVE_LOW>;
 110                         default-state = "keep";
 111                 };
 112         };
 113 };
 114
 115 &eth0 {
 116         interface@0 {
 117                 compatible = "lantiq,xrx200-pdi";
 118                 #address-cells = <1>;
 119                 #size-cells = <0>;
 120                 reg = <0>;
 121
 122                 lantiq,switch;
 123                 ethernet@2 {
 124                         compatible = "lantiq,xrx200-pdi-port";
 125                         reg = <2>;
 126                         phy-mode = "mii";
 127                         phy-handle = <&phy11>;
 128                 };
 129                 ethernet@4 {
 130                         compatible = "lantiq,xrx200-pdi-port";
 131                         reg = <4>;
 132                         phy-mode = "mii";
 133                         phy-handle = <&phy13>;
 134                 };
 135         };
 136
 137         mdio@0 {
 138                 #address-cells = <1>;
 139                 #size-cells = <0>;
 140                 compatible = "lantiq,xrx200-mdio";
 141                 phy11: ethernet-phy@11 {
 142                         reg = <0x11>;
 143                         compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
 144                         lantiq,led1h = <0x70>;
 145                         lantiq,led1l = <0x00>;
 146                         lantiq,led2h = <0x00>;
 147                         lantiq,led2l = <0x03>;
 148                 };
 149                 phy13: ethernet-phy@13 {
 150                         reg = <0x13>;
 151                         compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
 152                         lantiq,led1h = <0x70>;
 153                         lantiq,led1l = <0x00>;
 154                         lantiq,led2h = <0x00>;
 155                         lantiq,led2l = <0x03>;
 156                 };
 157         };
 158 };