target/linux/lantiq/dts/VG3503J.dts

   1 /dts-v1/;
   2
   3 #include "vr9.dtsi"
   4
   5 #include <dt-bindings/input/input.h>
   6
   7 / {
   8         model = "VG3503J - BT OpenReach VDSL Modem";
   9
  10         chosen {
  11                 bootargs = "console=ttyLTQ0,115200";
  12         };
  13
  14         aliases {
  15                 led-boot = &power_green;
  16                 led-failsafe = &power_red;
  17                 led-running = &power_green;
  18
  19                 led-internet = &dsl;
  20         };
  21
  22         memory@0 {
  23                 reg = <0x0 0x2000000>;
  24         };
  25
  26         fpi@10000000 {
  27                 localbus@0 {
  28                         ranges = <0 0 0x0 0x3ffffff>;
  29                         nor-boot@0 {
  30                                 compatible = "lantiq,nor";
  31                                 bank-width = <2>;
  32                                 reg = <0 0x0 0x2000000>;
  33                                 #address-cells = <1>;
  34                                 #size-cells = <1>;
  35
  36                                 partitions {
  37                                         compatible = "fixed-partitions";
  38                                         #address-cells = <1>;
  39                                         #size-cells = <1>;
  40
  41                                         partition@0 {
  42                                                 label = "uboot";
  43                                                 reg = <0x00000 0x20000>;
  44                                         };
  45
  46                                         partition@20000 {
  47                                                 label = "firmware";
  48                                                 reg = <0x20000 0x7d0000>;
  49                                         };
  50
  51                                         partition@7f0000 {
  52                                                 label = "uboot-env";
  53                                                 reg = <0x7f0000 0x10000>;
  54                                         };
  55                                 };
  56                         };
  57                 };
  58
  59                 gpio: pinmux@E100B10 {
  60                         pinctrl-names = "default";
  61                         pinctrl-0 = <&state_default>;
  62
  63                         state_default: pinmux {
  64                                 mdio {
  65                                         lantiq,groups = "mdio";
  66                                         lantiq,function = "mdio";
  67                                 };
  68                                 gphy-leds {
  69                                         lantiq,groups = "gphy0 led0", "gphy0 led1",
  70                                                         "gphy0 led2", "gphy1 led0",
  71                                                         "gphy1 led1", "gphy1 led2";
  72                                         lantiq,function = "gphy";
  73                                         lantiq,pull = <2>;
  74                                         lantiq,open-drain = <0>;
  75                                         lantiq,output = <1>;
  76                                 };
  77                         };
  78                 };
  79         };
  80
  81         gphy-xrx200 {
  82                 compatible = "lantiq,phy-xrx200";
  83                 firmware1 = "lantiq/vr9_phy11g_a1x.bin";        /*VR9 1.1*/
  84                 firmware2 = "lantiq/vr9_phy11g_a2x.bin";        /*VR9 1.2*/
  85                 phys = [ 00 01 ];
  86         };
  87
  88         gpio-keys-polled {
  89                 compatible = "gpio-keys-polled";
  90                 #address-cells = <1>;
  91                 #size-cells = <0>;
  92                 poll-interval = <100>;
  93                 reset {
  94                         label = "reset";
  95                         gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
  96                         linux,code = <KEY_RESTART>;
  97                 };
  98         };
  99
 100         gpio-leds {
 101                 compatible = "gpio-leds";
 102
 103                 power_red: power2 {
 104                         label = "vg3503j:red:power";
 105                         gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
 106                 };
 107                 dsl: dsl {
 108                         label = "vg3503j:green:dsl";
 109                         gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
 110                 };
 111                 power_green: power {
 112                         label = "vg3503j:green:power";
 113                         gpios = <&gpio 28 GPIO_ACTIVE_LOW>;
 114                         default-state = "keep";
 115                 };
 116         };
 117 };
 118
 119 &eth0 {
 120         interface@0 {
 121                 compatible = "lantiq,xrx200-pdi";
 122                 #address-cells = <1>;
 123                 #size-cells = <0>;
 124                 reg = <0>;
 125
 126                 lantiq,switch;
 127                 ethernet@2 {
 128                         compatible = "lantiq,xrx200-pdi-port";
 129                         reg = <2>;
 130                         phy-mode = "mii";
 131                         phy-handle = <&phy11>;
 132                 };
 133                 ethernet@4 {
 134                         compatible = "lantiq,xrx200-pdi-port";
 135                         reg = <4>;
 136                         phy-mode = "mii";
 137                         phy-handle = <&phy13>;
 138                 };
 139         };
 140
 141         mdio@0 {
 142                 #address-cells = <1>;
 143                 #size-cells = <0>;
 144                 compatible = "lantiq,xrx200-mdio";
 145                 phy11: ethernet-phy@11 {
 146                         reg = <0x11>;
 147                         compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
 148                         lantiq,led1h = <0x70>;
 149                         lantiq,led1l = <0x00>;
 150                         lantiq,led2h = <0x00>;
 151                         lantiq,led2l = <0x03>;
 152                 };
 153                 phy13: ethernet-phy@13 {
 154                         reg = <0x13>;
 155                         compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
 156                         lantiq,led1h = <0x70>;
 157                         lantiq,led1l = <0x00>;
 158                         lantiq,led2h = <0x00>;
 159                         lantiq,led2l = <0x03>;
 160                 };
 161         };
 162 };