target/linux/lantiq/dts/VGV7519.dtsi

   1 #include "vr9.dtsi"
   2
   3 #include <dt-bindings/input/input.h>
   4
   5 / {
   6
   7         model = "VGV7519 - KPN Experiabox V8";
   8
   9         chosen {
  10                 bootargs = "console=ttyLTQ0,115200 init=/etc/preinit mem=62M vpe1_load_addr=0x83e00000 vpe1_mem=2M maxvpes=1 maxtcs=1";
  11         };
  12
  13         aliases {
  14                 led-boot = &power_green;
  15                 led-failsafe = &power_red;
  16                 led-running = &power_green;
  17
  18                 led-dsl = &broadband_green;
  19                 led-internet = &internet_green;
  20                 led-wifi = &wireless_green;
  21         };
  22
  23         sram@1F000000 {
  24                 vmmc@107000 {
  25                         status = "okay";
  26                         gpios = <&gpio 30 GPIO_ACTIVE_HIGH  //fxs relay
  27                                  &gpio 31 GPIO_ACTIVE_HIGH  //still unknown
  28                                  &gpio 3  GPIO_ACTIVE_HIGH>; //reset_slic?
  29                 };
  30         };
  31
  32         memory@0 {
  33                 reg = <0x0 0x4000000>;
  34         };
  35
  36         fpi@10000000 {
  37                 localbus@0 {
  38                         nor-boot@0 {
  39                                 compatible = "lantiq,nor";
  40                                 bank-width = <2>;
  41                                 reg = <0 0x0 0x800000>, <1 0x800000 0x800000>;
  42                                 #address-cells = <1>;
  43                                 #size-cells = <1>;
  44
  45                                 partitions {
  46                                         compatible = "fixed-partitions";
  47                                         #address-cells = <1>;
  48                                         #size-cells = <1>;
  49
  50                                         boardconfig: partition@40000 {
  51                                                 label = "board_config";
  52                                                 reg = <0x40000 0x10000>;
  53                                                 read-only;
  54                                         };
  55                                 };
  56                         };
  57                 };
  58
  59                 gpio: pinmux@E100B10 {
  60                         pinctrl-names = "default";
  61                         pinctrl-0 = <&state_default>;
  62
  63                         state_default: pinmux {
  64                                 stp {
  65                                         lantiq,groups = "stp";
  66                                         lantiq,function = "stp";
  67                                         lantiq,open-drain = <0>;
  68                                         lantiq,output = <1>;
  69                                         lantiq,pull = <0>;
  70                                 };
  71                                 mdio {
  72                                         lantiq,groups = "mdio";
  73                                         lantiq,function = "mdio";
  74                                 };
  75                                 pci-rst {
  76                                         lantiq,pins = "io21";
  77                                         lantiq,open-drain = <0>;
  78                                         lantiq,pull = <0>;
  79                                         lantiq,output = <1>;
  80                                 };
  81                                 gphy-leds {
  82                                         lantiq,groups = "gphy0 led1", "gphy1 led0";
  83                                         lantiq,function = "gphy";
  84                                         lantiq,open-drain = <0>;
  85                                         lantiq,pull = <0>;
  86                                         lantiq,output = <1>;
  87                                 };
  88                         };
  89                 };
  90
  91                 stp: stp@E100BB0 {
  92                         compatible = "lantiq,gpio-stp-xway";
  93                         reg = <0xE100BB0 0x40>;
  94                         #gpio-cells = <2>;
  95                         gpio-controller;
  96
  97                         lantiq,shadow = <0xffff>;
  98                         lantiq,groups = <0x3>;
  99                         lantiq,dsl = <0x0>;
 100                         lantiq,phy1 = <0x0>;
 101                         lantiq,phy2 = <0x0>;
 102                         /* lantiq,rising; */
 103                 };
 104
 105                 ifxhcd@E101000 {
 106                         status = "okay";
 107                         gpios = <&gpio 32 GPIO_ACTIVE_HIGH>;
 108                         lantiq,portmask = <0x3>;
 109                 };
 110
 111                 ifxhcd@E106000 {
 112                         status = "okay";
 113                         gpios = <&gpio 32 GPIO_ACTIVE_HIGH>;
 114                 };
 115
 116                 pcie@d900000 {
 117                         status = "disabled";
 118                 };
 119         };
 120
 121         gphy-xrx200 {
 122                 compatible = "lantiq,phy-xrx200";
 123                 firmware1 = "lantiq/vr9_phy11g_a1x.bin";        /*VR9 1.1*/
 124                 firmware2 = "lantiq/vr9_phy11g_a2x.bin";        /*VR9 1.2*/
 125                 phys = [ 00 01 ];
 126         };
 127
 128         gpio-keys-polled {
 129                 compatible = "gpio-keys-polled";
 130                 #address-cells = <1>;
 131                 #size-cells = <0>;
 132                 poll-interval = <100>;
 133                 reset {
 134                         label = "reset";
 135                         gpios = <&gpio 9 GPIO_ACTIVE_LOW>;
 136                         linux,code = <KEY_RESTART>;
 137                 };
 138                 eco {
 139                         label = "eco";
 140                         gpios = <&gpio 41 GPIO_ACTIVE_LOW>;
 141                         linux,code = <KEY_RFKILL>;
 142                 };
 143                 rfkill {
 144                         label = "rfkill";
 145                         gpios = <&gpio 45 GPIO_ACTIVE_LOW>;
 146                         linux,code = <KEY_RFKILL>;
 147                 };
 148                 wps {
 149                         label = "wps";
 150                         gpios = <&gpio 10 GPIO_ACTIVE_LOW>;
 151                         linux,code = <KEY_WPS_BUTTON>;
 152                 };
 153         };
 154
 155         gpio-leds {
 156                 compatible = "gpio-leds";
 157
 158                 eco {
 159                         label = "vgv7519:blue:eco";
 160                         gpios = <&stp 2 GPIO_ACTIVE_LOW>;
 161                 };
 162                 wps_red {
 163                         label = "vgv7519:red:wps";
 164                         gpios = <&stp 3 GPIO_ACTIVE_LOW>;
 165                 };
 166                 wps_green {
 167                         label = "vgv7519:green:wps";
 168                         gpios = <&stp 4 GPIO_ACTIVE_LOW>;
 169                 };
 170                 upgrade {
 171                         label = "vgv7519:blue:upgrade";
 172                         gpios = <&stp 5 GPIO_ACTIVE_LOW>;
 173                 };
 174                 tv {
 175                         label = "vgv7519:green:tv";
 176                         gpios = <&stp 6 GPIO_ACTIVE_LOW>;
 177                 };
 178                 internet_green: internet_green {
 179                         label = "vgv7519:green:internet";
 180                         gpios = <&stp 7 GPIO_ACTIVE_LOW>;
 181                 };
 182                 internet_red {
 183                         label = "vgv7519:red:internet";
 184                         gpios = <&stp 8 GPIO_ACTIVE_LOW>;
 185                 };
 186                 broadband_red {
 187                         label = "vgv7519:red:broadband";
 188                         gpios = <&stp 9 GPIO_ACTIVE_LOW>;
 189                 };
 190                 broadband_green: broadband_green {
 191                         label = "vgv7519:green:broadband";
 192                         gpios = <&stp 10 GPIO_ACTIVE_LOW>;
 193                 };
 194                 voice {
 195                         label = "vgv7519:green:voice";
 196                         gpios = <&stp 11 GPIO_ACTIVE_LOW>;
 197                 };
 198                 wireless_red {
 199                         label = "vgv7519:red:wireless";
 200                         gpios = <&stp 12 GPIO_ACTIVE_LOW>;
 201                 };
 202                 wireless_green: wireless_green {
 203                         label = "vgv7519:green:wireless";
 204                         gpios = <&stp 13 GPIO_ACTIVE_LOW>;
 205                 };
 206                 power_green: power2 {
 207                         label = "vgv7519:green:power";
 208                         gpios = <&stp 14 GPIO_ACTIVE_LOW>;
 209                         default-state = "keep";
 210                 };
 211                 power_red: power {
 212                         label = "vgv7519:red:power";
 213                         gpios = <&stp 15 GPIO_ACTIVE_LOW>;
 214                 };
 215         };
 216 };
 217
 218 &pci0 {
 219         status = "okay";
 220         gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
 221
 222         wifi@1814,3091 {
 223                 compatible = "pci1814,3091";
 224                 reg = <0x7000 0 0 0 0>;
 225                 ralink,mtd-eeprom = <&boardconfig 0x410>;
 226                 ralink,mtd-eeprom-swap;
 227                 mtd-mac-address = <&boardconfig 0x16>;
 228                 mtd-mac-address-increment = <1>;
 229         };
 230 };
 231
 232 &eth0 {
 233         lan: interface@0 {
 234                 compatible = "lantiq,xrx200-pdi";
 235                 #address-cells = <1>;
 236                 #size-cells = <0>;
 237                 reg = <0>;
 238                 mtd-mac-address = <&boardconfig 0x16>;
 239                 mtd-mac-address-increment = <1>;
 240                 lantiq,switch;
 241
 242                 ethernet@0 {
 243                         compatible = "lantiq,xrx200-pdi-port";
 244                         reg = <0>;
 245                         phy-mode = "rgmii";
 246                         phy-handle = <&phy0>;
 247                 };
 248                 ethernet@1 {
 249                         compatible = "lantiq,xrx200-pdi-port";
 250                         reg = <1>;
 251                         phy-mode = "rgmii";
 252                         phy-handle = <&phy1>;
 253                 };
 254                 ethernet@2 {
 255                         compatible = "lantiq,xrx200-pdi-port";
 256                         reg = <2>;
 257                         phy-mode = "gmii";
 258                         phy-handle = <&phy11>;
 259                 };
 260                 ethernet@4 {
 261                         compatible = "lantiq,xrx200-pdi-port";
 262                         reg = <4>;
 263                         phy-mode = "gmii";
 264                         phy-handle = <&phy13>;
 265                 };
 266         };
 267
 268         wan: interface@1 {
 269                 compatible = "lantiq,xrx200-pdi";
 270                 #address-cells = <1>;
 271                 #size-cells = <0>;
 272                 reg = <1>;
 273                 mtd-mac-address = <&boardconfig 0x16>;
 274                 lantiq,wan;
 275
 276                 ethernet@5 {
 277                         compatible = "lantiq,xrx200-pdi-port";
 278                         reg = <5>;
 279                         phy-mode = "rgmii";
 280                         phy-handle = <&phy5>;
 281                 };
 282         };
 283
 284         mdio@0 {
 285                 #address-cells = <1>;
 286                 #size-cells = <0>;
 287                 compatible = "lantiq,xrx200-mdio";
 288                 phy0: ethernet-phy@0 {
 289                         reg = <0x0>;
 290                         compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
 291                 };
 292                 phy1: ethernet-phy@1 {
 293                         reg = <0x1>;
 294                         compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
 295                 };
 296                 phy5: ethernet-phy@5 {
 297                         reg = <0x5>;
 298                         compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
 299                 };
 300                 phy11: ethernet-phy@11 {
 301                         reg = <0x11>;
 302                         compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
 303                 };
 304                 phy13: ethernet-phy@13 {
 305                         reg = <0x13>;
 306                         compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
 307                 };
 308         };
 309 };