target/linux/lantiq/dts/VGV7519.dtsi

   1 /include/ "vr9.dtsi"
   2
   3 / {
   4
   5     model = "VGV7519 - KPN Experiabox V8";
   6
   7         chosen {
   8                 bootargs = "console=ttyLTQ0,115200 init=/etc/preinit";
   9
  10                 leds {
  11                         boot = &power_green;
  12                         failsafe = &power_red;
  13                         running = &power_green;
  14
  15                         dsl = &broadband_green;
  16                         internet = &internet_green;
  17                         wifi = &wireless_green;
  18                 };
  19         };
  20
  21         memory@0 {
  22                 reg = <0x0 0x4000000>;
  23         };
  24
  25         cputemp@0 {
  26                 compatible = "lantiq,cputemp";
  27         };
  28
  29         fpi@10000000 {
  30                 localbus@0 {
  31                         nor-boot@0 {
  32                                 compatible = "lantiq,nor";
  33                                 bank-width = <2>;
  34                                 reg = <0 0x0 0x800000>, <1 0x800000 0x800000>;
  35                                 #address-cells = <1>;
  36                                 #size-cells = <1>;
  37
  38                                 partitions {
  39                                         compatible = "fixed-partitions";
  40                                         #address-cells = <1>;
  41                                         #size-cells = <1>;
  42
  43                                         boardconfig: partition@40000 {
  44                                                 label = "board_config";
  45                                                 reg = <0x40000 0x10000>;
  46                                                 read-only;
  47                                         };
  48                                 };
  49                         };
  50                 };
  51
  52                 gpio: pinmux@E100B10 {
  53                         pinctrl-names = "default";
  54                         pinctrl-0 = <&state_default>;
  55
  56                         state_default: pinmux {
  57                                 stp {
  58                                         lantiq,groups = "stp";
  59                                         lantiq,function = "stp";
  60                                         lantiq,open-drain = <0>;
  61                                         lantiq,output = <1>;
  62                                         lantiq,pull = <0>;
  63                                 };
  64                                 mdio {
  65                                         lantiq,groups = "mdio";
  66                                         lantiq,function = "mdio";
  67                                 };
  68                                 pci-rst {
  69                                         lantiq,pins = "io21";
  70                                         lantiq,open-drain = <0>;
  71                                         lantiq,pull = <0>;
  72                                         lantiq,output = <1>;
  73                                 };
  74                                 gphy-leds {
  75                                         lantiq,groups = "gphy0 led1", "gphy1 led0";
  76                                         lantiq,function = "gphy";
  77                                         lantiq,open-drain = <0>;
  78                                         lantiq,pull = <0>;
  79                                         lantiq,output = <1>;
  80                                 };
  81                         };
  82                 };
  83
  84                 stp: stp@E100BB0 {
  85                         compatible = "lantiq,gpio-stp-xway";
  86                         reg = <0xE100BB0 0x40>;
  87                         #gpio-cells = <2>;
  88                         gpio-controller;
  89
  90                         lantiq,shadow = <0xffff>;
  91                         lantiq,groups = <0x3>;
  92                         lantiq,dsl = <0x0>;
  93                         lantiq,phy1 = <0x0>;
  94                         lantiq,phy2 = <0x0>;
  95                         /* lantiq,rising; */
  96                 };
  97
  98                 ifxhcd@E101000 {
  99                         status = "okay";
 100                         gpios = <&gpio 32 0>;
 101                         lantiq,portmask = <0x3>;
 102                 };
 103
 104                 ifxhcd@E106000 {
 105                         status = "okay";
 106                         gpios = <&gpio 32 0>;
 107                 };
 108
 109                 pci@E105400 {
 110                         status = "okay";
 111                         lantiq,bus-clock = <33333333>;
 112                         interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
 113                         interrupt-map = <
 114                                 0x7000 0 0 1 &icu0 30 1 // slot 14, irq 30
 115                                 >;
 116                         gpio-reset = <&gpio 21 0>;
 117                         req-mask = <0x1>;       /* GNT1 */
 118                 };
 119
 120                 pcie@d900000 {
 121                         status = "disabled";
 122                 };
 123         };
 124
 125         gphy-xrx200 {
 126                 compatible = "lantiq,phy-xrx200";
 127                 firmware1 = "lantiq/vr9_phy11g_a1x.bin";        /*VR9 1.1*/
 128                 firmware2 = "lantiq/vr9_phy11g_a2x.bin";        /*VR9 1.2*/
 129                 phys = [ 00 01 ];
 130         };
 131
 132         ralink_eep {
 133                 compatible = "ralink,eeprom";
 134                 ralink,eeprom = "RT2860.eeprom";
 135         };
 136
 137         gpio-keys-polled {
 138                 compatible = "gpio-keys-polled";
 139                 #address-cells = <1>;
 140                 #size-cells = <0>;
 141                 poll-interval = <100>;
 142                 reset {
 143                         label = "reset";
 144                         gpios = <&gpio 9 1>;
 145                         linux,code = <0x198>;
 146                 };
 147                 eco {
 148                         label = "eco";
 149                         gpios = <&gpio 41 1>;
 150                         linux,code = <247>;
 151                 };
 152                 rfkill {
 153                         label = "rfkill";
 154                         gpios = <&gpio 45 1>;
 155                         linux,code = <0xf7>;
 156                 };
 157                 wps {
 158                         label = "wps";
 159                         gpios = <&gpio 10 1>;
 160                         linux,code = <0x211>;
 161                 };
 162         };
 163
 164         gpio-leds {
 165                 compatible = "gpio-leds";
 166
 167                 eco {
 168                         label = "vgv7519:blue:eco";
 169                         gpios = <&stp 2 1>;
 170                 };
 171                 wps_red {
 172                         label = "vgv7519:red:wps";
 173                         gpios = <&stp 3 1>;
 174                 };
 175                 wps_green {
 176                         label = "vgv7519:green:wps";
 177                         gpios = <&stp 4 1>;
 178                 };
 179                 upgrade {
 180                         label = "vgv7519:blue:upgrade";
 181                         gpios = <&stp 5 1>;
 182                 };
 183                 tv {
 184                         label = "vgv7519:green:tv";
 185                         gpios = <&stp 6 1>;
 186                 };
 187                 internet_green: internet_green {
 188                         label = "vgv7519:green:internet";
 189                         gpios = <&stp 7 1>;
 190                 };
 191                 internet_red {
 192                         label = "vgv7519:red:internet";
 193                         gpios = <&stp 8 1>;
 194                 };
 195                 broadband_red {
 196                         label = "vgv7519:red:broadband";
 197                         gpios = <&stp 9 1>;
 198                 };
 199                 broadband_green: broadband_green {
 200                         label = "vgv7519:green:broadband";
 201                         gpios = <&stp 10 1>;
 202                 };
 203                 voice {
 204                         label = "vgv7519:green:voice";
 205                         gpios = <&stp 11 1>;
 206                 };
 207                 wireless_red {
 208                         label = "vgv7519:red:wireless";
 209                         gpios = <&stp 12 1>;
 210                 };
 211                 wireless_green: wireless_green {
 212                         label = "vgv7519:green:wireless";
 213                         gpios = <&stp 13 1>;
 214                 };
 215                 power_green: power2 {
 216                         label = "vgv7519:green:power";
 217                         gpios = <&stp 14 1>;
 218                         default-state = "keep";
 219                 };
 220                 power_red: power {
 221                         label = "vgv7519:red:power";
 222                         gpios = <&stp 15 1>;
 223                 };
 224         };
 225 };
 226
 227 &eth0 {
 228         lan: interface@0 {
 229                 compatible = "lantiq,xrx200-pdi";
 230                 #address-cells = <1>;
 231                 #size-cells = <0>;
 232                 reg = <0>;
 233                 mtd-mac-address = <&boardconfig 0x16>;
 234                 lantiq,switch;
 235
 236                 ethernet@0 {
 237                         compatible = "lantiq,xrx200-pdi-port";
 238                         reg = <0>;
 239                         phy-mode = "rgmii";
 240                         phy-handle = <&phy0>;
 241                 };
 242                 ethernet@1 {
 243                         compatible = "lantiq,xrx200-pdi-port";
 244                         reg = <1>;
 245                         phy-mode = "rgmii";
 246                         phy-handle = <&phy1>;
 247                 };
 248                 ethernet@2 {
 249                         compatible = "lantiq,xrx200-pdi-port";
 250                         reg = <2>;
 251                         phy-mode = "gmii";
 252                         phy-handle = <&phy11>;
 253                 };
 254                 ethernet@4 {
 255                         compatible = "lantiq,xrx200-pdi-port";
 256                         reg = <4>;
 257                         phy-mode = "gmii";
 258                         phy-handle = <&phy13>;
 259                 };
 260         };
 261
 262         wan: interface@1 {
 263                 compatible = "lantiq,xrx200-pdi";
 264                 #address-cells = <1>;
 265                 #size-cells = <0>;
 266                 reg = <1>;
 267                 mtd-mac-address = <&boardconfig 0x16>;
 268                 mtd-mac-address-increment = <2>;
 269                 lantiq,wan;
 270
 271                 ethernet@5 {
 272                         compatible = "lantiq,xrx200-pdi-port";
 273                         reg = <5>;
 274                         phy-mode = "rgmii";
 275                         phy-handle = <&phy5>;
 276                 };
 277         };
 278
 279         mdio@0 {
 280                 #address-cells = <1>;
 281                 #size-cells = <0>;
 282                 compatible = "lantiq,xrx200-mdio";
 283                 phy0: ethernet-phy@0 {
 284                         reg = <0x0>;
 285                         compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
 286                 };
 287                 phy1: ethernet-phy@1 {
 288                         reg = <0x1>;
 289                         compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
 290                 };
 291                 phy5: ethernet-phy@5 {
 292                         reg = <0x5>;
 293                         compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
 294                 };
 295                 phy11: ethernet-phy@11 {
 296                         reg = <0x11>;
 297                         compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
 298                 };
 299                 phy13: ethernet-phy@13 {
 300                         reg = <0x13>;
 301                         compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
 302                 };
 303         };
 304 };