lantiq: use sysupgrade.bin postfix for tplink images
[openwrt/openwrt.git] / target / linux / lantiq / dts / WBMR.dts
1 /dts-v1/;
2
3 /include/ "ar9.dtsi"
4
5 / {
6 model = "WBMR - Buffalo WBMR-HP-G300H";
7
8 chosen {
9 bootargs = "console=ttyLTQ0,115200 init=/etc/preinit";
10
11 leds {
12 boot = &power_green;
13 failsafe = &power_red;
14 running = &power_green;
15
16 dsl = &dsl;
17 internet = &online_green;
18 usb = &usb;
19 wifi = &wifi;
20 };
21 };
22
23 memory@0 {
24 reg = <0x0 0x4000000>;
25 };
26
27 fpi@10000000 {
28 localbus@0 {
29 nor-boot@0 {
30 compatible = "lantiq,nor";
31 bank-width = <2>;
32 reg = <0 0x0 0x2000000>;
33 #address-cells = <1>;
34 #size-cells = <1>;
35
36 partition@0 {
37 label = "uboot";
38 reg = <0x00000 0x40000>;
39 read-only;
40 };
41
42 partition@40000 {
43 label = "uboot_env";
44 reg = <0x40000 0x20000>;
45 read-only;
46 };
47
48 partition@20000 {
49 label = "firmware";
50 reg = <0x60000 0x1f20000>;
51 };
52
53 partition@0x1fc0000 {
54 label = "board";
55 reg = <0x1fc0000 0x20000>;
56 read-only;
57 };
58
59 partition@0x1fe0000 {
60 label = "calibration";
61 reg = <0x1fe0000 0x20000>;
62 read-only;
63 };
64 };
65
66 mac_addr {
67 compatible = "lantiq,eth-mac";
68 reg = <0 0x1fd0024 0x6>;
69 };
70 };
71
72 gpio: pinmux@E100B10 {
73 pinctrl-names = "default";
74 pinctrl-0 = <&state_default>;
75
76 state_default: pinmux {
77 pci-in {
78 lantiq,groups = "req1";
79 lantiq,output = <0>;
80 lantiq,open-drain = <1>;
81 lantiq,pull = <2>;
82 };
83 pci-out {
84 lantiq,groups = "gnt1";
85 lantiq,output = <1>;
86 lantiq,pull = <0>;
87 };
88 pci_rst {
89 lantiq,pins = "io21";
90 lantiq,pull = <0>;
91 lantiq,output = <1>;
92 };
93 };
94 };
95
96 etop@E180000 {
97 phy-mode = "rgmii";
98 };
99
100 ifxhcd@E101000 {
101 status = "okay";
102 gpios = <&gpio 36 0>;
103 };
104
105 pci@E105400 {
106 status = "okay";
107 };
108 };
109
110 gpio-keys-polled {
111 compatible = "gpio-keys-polled";
112 #address-cells = <1>;
113 #size-cells = <0>;
114 poll-interval = <100>;
115
116 wps {
117 label = "wps";
118 gpios = <&gpio 0 1>;
119 linux,code = <0x211>;
120 };
121 reset {
122 label = "reset";
123 gpios = <&gpio 37 1>;
124 linux,code = <0x198>;
125 };
126 eject {
127 label = "eject";
128 gpios = <&gpio 34 1>;
129 linux,code = <0xf7>;
130 };
131 movie {
132 label = "movie";
133 gpios = <&gpio 22 1>;
134 linux,code = <0x109>;
135 };
136 };
137
138 gpio-leds {
139 compatible = "gpio-leds";
140
141 power_green: power {
142 label = "wbmr:green:power";
143 gpios = <&gpio 1 1>;
144 default-state = "keep";
145 };
146 power_red: power2 {
147 label = "wbmr:red:power";
148 gpios = <&gpio 5 1>;
149 };
150 security {
151 label = "wbmr:yellow:security";
152 gpios = <&gpio 14 1>;
153 };
154 wifi: wifi {
155 label = "wbmr:green:wireless";
156 gpios = <&gpio 15 1>;
157 };
158 dsl: dsl {
159 label = "wbmr:green:dsl";
160 gpios = <&gpio 16 1>;
161 };
162 online_green: online {
163 label = "wbmr:green:internet";
164 gpios = <&gpio 17 1>;
165 };
166 online2 {
167 label = "wbmr:red:internet";
168 gpios = <&gpio 18 1>;
169 };
170 movie {
171 label = "wbmr:blue:movie";
172 gpios = <&gpio 20 1>;
173 };
174 usb: usb {
175 label = "wbmr:green:usb";
176 gpios = <&gpio 28 1>;
177 default-state = "on";
178 };
179 };
180 };