target/linux/lantiq/dts/ar9.dtsi

   1 #include <dt-bindings/gpio/gpio.h>
   2
   3 / {
   4         #address-cells = <1>;
   5         #size-cells = <1>;
   6         compatible = "lantiq,xway", "lantiq,ar9";
   7
   8         cpus {
   9                 cpu@0 {
  10                         compatible = "mips,mips34K";
  11                 };
  12         };
  13
  14         memory@0 {
  15                 device_type = "memory";
  16         };
  17
  18         biu@1F800000 {
  19                 #address-cells = <1>;
  20                 #size-cells = <1>;
  21                 compatible = "lantiq,biu", "simple-bus";
  22                 reg = <0x1F800000 0x800000>;
  23                 ranges = <0x0 0x1F800000 0x7FFFFF>;
  24
  25                 icu0: icu@80200 {
  26                         #interrupt-cells = <1>;
  27                         interrupt-controller;
  28                         compatible = "lantiq,icu";
  29                         reg = <0x80200 0x28
  30                                 0x80228 0x28
  31                                 0x80250 0x28
  32                                 0x80278 0x28
  33                                 0x802a0 0x28>;
  34                 };
  35
  36                 watchdog@803F0 {
  37                         compatible = "lantiq,wdt";
  38                         reg = <0x803F0 0x10>;
  39                 };
  40         };
  41
  42         sram@1F000000 {
  43                 #address-cells = <1>;
  44                 #size-cells = <1>;
  45                 compatible = "lantiq,sram", "simple-bus";
  46                 reg = <0x1F000000 0x800000>;
  47                 ranges = <0x0 0x1F000000 0x7FFFFF>;
  48
  49                 eiu0: eiu@101000 {
  50                         #interrupt-cells = <1>;
  51                         interrupt-controller;
  52                         compatible = "lantiq,eiu-xway";
  53                         reg = <0x101000 0x1000>;
  54                         interrupt-parent = <&icu0>;
  55                         lantiq,eiu-irqs = <166 135 66 40 41 42>;
  56                 };
  57
  58                 pmu0: pmu@102000 {
  59                         compatible = "lantiq,pmu-xway";
  60                         reg = <0x102000 0x1000>;
  61                 };
  62
  63                 cgu0: cgu@103000 {
  64                         compatible = "lantiq,cgu-xway";
  65                         reg = <0x103000 0x1000>;
  66                         #clock-cells = <1>;
  67                 };
  68
  69                 rcu0: rcu@203000 {
  70                         compatible = "lantiq,rcu-xway";
  71                         reg = <0x203000 0x1000>;
  72                 };
  73         };
  74
  75         fpi@10000000 {
  76                 #address-cells = <1>;
  77                 #size-cells = <1>;
  78                 compatible = "lantiq,fpi", "simple-bus";
  79                 ranges = <0x0 0x10000000 0xEEFFFFF>;
  80                 reg = <0x10000000 0xEF00000>;
  81
  82                 localbus@0 {
  83                         #address-cells = <2>;
  84                         #size-cells = <1>;
  85                         ranges = <0 0 0x0 0x3ffffff /* addrsel0 */
  86                                 1 0 0x4000000 0x4000010>; /* addsel1 */
  87                         compatible = "lantiq,localbus", "simple-bus";
  88                 };
  89
  90                 gptu@E100A00 {
  91                         compatible = "lantiq,gptu-xway";
  92                         reg = <0xE100A00 0x100>;
  93                         interrupt-parent = <&icu0>;
  94                         interrupts = <126 127 128 129 130 131>;
  95                 };
  96
  97                 asc0: serial@E100400 {
  98                         compatible = "lantiq,asc";
  99                         reg = <0xE100400 0x400>;
 100                         interrupt-parent = <&icu0>;
 101                         interrupts = <104 105 106>;
 102                         status = "disabled";
 103                 };
 104
 105                 spi: spi@E100800 {
 106                         compatible = "lantiq,xrx100-spi";
 107                         reg = <0xE100800 0x100>;
 108                         interrupt-parent = <&icu0>;
 109                         interrupts = <22 23 24>;
 110                         interrupt-names = "spi_rx", "spi_tx", "spi_err",
 111                                         "spi_frm";
 112                         #address-cells = <1>;
 113                         #size-cells = <1>;
 114                         status = "disabled";
 115                 };
 116
 117                 gpio: pinmux@E100B10 {
 118                         compatible = "lantiq,xrx100-pinctrl";
 119                         #gpio-cells = <2>;
 120                         gpio-controller;
 121                         reg = <0xE100B10 0xA0>;
 122                 };
 123
 124                 asc1: serial@E100C00 {
 125                         compatible = "lantiq,asc";
 126                         reg = <0xE100C00 0x400>;
 127                         interrupt-parent = <&icu0>;
 128                         interrupts = <112 113 114>;
 129                 };
 130
 131                 ifxhcd@E101000 {
 132                         compatible = "lantiq,ifxhcd-arx100", "lantiq,ifxhcd-arx100-dwc2";
 133                         reg = <0xE101000 0x1000
 134                                 0xE120000 0x3f000>;
 135                         interrupt-parent = <&icu0>;
 136                         interrupts = <62 91>;
 137                         status = "disabled";
 138                 };
 139
 140                 ifxhcd@E106000 {
 141                         compatible = "lantiq,ifxhcd-arx100-dwc2";
 142                         reg = <0xE106000 0x1000
 143                                 0xE1E0000 0x3f000>;
 144                         interrupt-parent = <&icu0>;
 145                         interrupts = <91>;
 146                         status = "disabled";
 147                 };
 148
 149                 deu@E103100 {
 150                         compatible = "lantiq,deu-arx100";
 151                         reg = <0xE103100 0xf00>;
 152                 };
 153
 154                 dma0: dma@E104100 {
 155                         compatible = "lantiq,dma-xway";
 156                         reg = <0xE104100 0x800>;
 157                 };
 158
 159                 ebu0: ebu@E105300 {
 160                         compatible = "lantiq,ebu-xway";
 161                         reg = <0xE105300 0x100>;
 162                 };
 163
 164                 mei@E116000 {
 165                         compatible = "lantiq,mei-xway";
 166                         interrupt-parent = <&icu0>;
 167                         interrupts = <63>;
 168                 };
 169
 170                 etop@E180000 {
 171                         compatible = "lantiq,etop-xway";
 172                         reg = <0xE180000 0x40000
 173                                 0xE108000 0x200>;
 174                         interrupt-parent = <&icu0>;
 175                         interrupts = <73 72>;
 176                         mac-address = [ 00 11 22 33 44 55 ];
 177                 };
 178
 179                 ppe@E234000 {
 180                         compatible = "lantiq,ppe-arx100";
 181                         interrupt-parent = <&icu0>;
 182                         interrupts = <96>;
 183                 };
 184
 185                 pci0: pci@E105400 {
 186                         status = "disabled";
 187                         #address-cells = <3>;
 188                         #size-cells = <2>;
 189                         #interrupt-cells = <1>;
 190                         compatible = "lantiq,pci-xway";
 191                         bus-range = <0x0 0x0>;
 192                         ranges = <0x2000000 0 0x8000000 0x8000000 0 0x2000000   /* pci memory */
 193                                   0x1000000 0 0x00000000 0xAE00000 0 0x200000>; /* io space */
 194                         reg = <0x7000000 0x8000         /* config space */
 195                                 0xE105400 0x400>;       /* pci bridge */
 196                         lantiq,bus-clock = <33333333>;
 197                         interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
 198                         interrupt-map = <0x7000 0 0 1 &icu0 30 1>;
 199                         req-mask = <0x1>;
 200                 };
 201         };
 202
 203         adsl {
 204                 compatible = "lantiq,adsl-arx100";
 205         };
 206 };