target/linux/lantiq/dts/vr9.dtsi

   1 #include <dt-bindings/gpio/gpio.h>
   2 #include <dt-bindings/input/input.h>
   3
   4 / {
   5         #address-cells = <1>;
   6         #size-cells = <1>;
   7         compatible = "lantiq,xway", "lantiq,vr9";
   8
   9         cpus {
  10                 cpu@0 {
  11                         compatible = "mips,mips34Kc";
  12                 };
  13         };
  14
  15         memory@0 {
  16                 device_type = "memory";
  17         };
  18
  19         biu@1F800000 {
  20                 #address-cells = <1>;
  21                 #size-cells = <1>;
  22                 compatible = "lantiq,biu", "simple-bus";
  23                 reg = <0x1F800000 0x800000>;
  24                 ranges = <0x0 0x1F800000 0x7FFFFF>;
  25
  26                 icu0: icu@80200 {
  27                         #interrupt-cells = <1>;
  28                         interrupt-controller;
  29                         compatible = "lantiq,icu";
  30                         reg = <0x80200 0x28
  31                                 0x80228 0x28
  32                                 0x80250 0x28
  33                                 0x80278 0x28
  34                                 0x802a0 0x28>;
  35                 };
  36
  37                 watchdog@803F0 {
  38                         compatible = "lantiq,wdt";
  39                         reg = <0x803F0 0x10>;
  40                 };
  41         };
  42
  43         sram@1F000000 {
  44                 #address-cells = <1>;
  45                 #size-cells = <1>;
  46                 compatible = "lantiq,sram", "simple-bus";
  47                 reg = <0x1F000000 0x800000>;
  48                 ranges = <0x0 0x1F000000 0x7FFFFF>;
  49
  50                 eiu0: eiu@101000 {
  51                         #interrupt-cells = <1>;
  52                         interrupt-controller;
  53                         compatible = "lantiq,eiu-xway";
  54                         reg = <0x101000 0x1000>;
  55                         interrupt-parent = <&icu0>;
  56                         lantiq,eiu-irqs = <166 135 66 40 41 42>;
  57                 };
  58
  59                 pmu0: pmu@102000 {
  60                         compatible = "lantiq,pmu-xway";
  61                         reg = <0x102000 0x1000>;
  62                 };
  63
  64                 cgu0: cgu@103000 {
  65                         compatible = "lantiq,cgu-xway";
  66                         reg = <0x103000 0x1000>;
  67                 };
  68
  69                 dcdc@106a00 {
  70                         compatible = "lantiq,dcdc-xrx200";
  71                         reg = <0x106a00 0x200>;
  72                 };
  73
  74                 rcu0: rcu@203000 {
  75                         compatible = "lantiq,rcu-xrx200";
  76                         reg = <0x203000 0x1000>;
  77                         /* irq for thermal sensor */
  78                         interrupt-parent = <&icu0>;
  79                         interrupts = <115>;
  80                 };
  81
  82                 xbar0: xbar@400000 {
  83                         compatible = "lantiq,xbar-xway";
  84                         reg = <0x400000 0x1000>;
  85                 };
  86         };
  87
  88         fpi@10000000 {
  89                 #address-cells = <1>;
  90                 #size-cells = <1>;
  91                 compatible = "lantiq,fpi", "simple-bus";
  92                 ranges = <0x0 0x10000000 0xEEFFFFF>;
  93                 reg = <0x10000000 0xEF00000>;
  94
  95                 localbus@0 {
  96                         #address-cells = <2>;
  97                         #size-cells = <1>;
  98                         ranges = <0 0 0x0 0x3ffffff /* addrsel0 */
  99                                 1 0 0x4000000 0x4000010>; /* addsel1 */
 100                         compatible = "lantiq,localbus", "simple-bus";
 101                 };
 102
 103                 gptu@E100A00 {
 104                         compatible = "lantiq,gptu-xway";
 105                         reg = <0xE100A00 0x100>;
 106                         interrupt-parent = <&icu0>;
 107                         interrupts = <126 127 128 129 130 131>;
 108                 };
 109
 110                 asc0: serial@E100400 {
 111                         compatible = "lantiq,asc";
 112                         reg = <0xE100400 0x400>;
 113                         interrupt-parent = <&icu0>;
 114                         interrupts = <104 105 106>;
 115                         status = "disabled";
 116                 };
 117
 118                 spi: spi@E100800 {
 119                         compatible = "lantiq,xrx200-spi";
 120                         reg = <0xE100800 0x100>;
 121                         interrupt-parent = <&icu0>;
 122                         interrupts = <22 23 24>;
 123                         interrupt-names = "spi_rx", "spi_tx", "spi_err",
 124                                         "spi_frm";
 125                         #address-cells = <1>;
 126                         #size-cells = <1>;
 127                         status = "disabled";
 128                 };
 129
 130                 gpio: pinmux@E100B10 {
 131                         compatible = "lantiq,xrx200-pinctrl";
 132                         #gpio-cells = <2>;
 133                         gpio-controller;
 134                         reg = <0xE100B10 0xA0>;
 135                 };
 136
 137                 asc1: serial@E100C00 {
 138                         compatible = "lantiq,asc";
 139                         reg = <0xE100C00 0x400>;
 140                         interrupt-parent = <&icu0>;
 141                         interrupts = <112 113 114>;
 142                 };
 143
 144                 deu@E103100 {
 145                         compatible = "lantiq,deu-xrx200";
 146                         reg = <0xE103100 0xf00>;
 147                 };
 148
 149                 dma0: dma@E104100 {
 150                         compatible = "lantiq,dma-xway";
 151                         reg = <0xE104100 0x800>;
 152                 };
 153
 154                 ebu0: ebu@E105300 {
 155                         compatible = "lantiq,ebu-xway";
 156                         reg = <0xE105300 0x100>;
 157                 };
 158
 159                 ifxhcd@E101000 {
 160                         status = "disabled";
 161                         compatible = "lantiq,ifxhcd-xrx200", "lantiq,ifxhcd-xrx200-dwc2";
 162                         reg = <0xE101000 0x1000
 163                                 0xE120000 0x3f000>;
 164                         interrupt-parent = <&icu0>;
 165                         interrupts = <62 91>;
 166                 };
 167
 168                 ifxhcd@E106000 {
 169                         status = "disabled";
 170                         compatible = "lantiq,ifxhcd-xrx200-dwc2";
 171                         reg = <0xE106000 0x1000>;
 172                         interrupt-parent = <&icu0>;
 173                         interrupts = <91>;
 174                 };
 175
 176                 eth0: eth@E108000 {
 177                         #address-cells = <1>;
 178                         #size-cells = <0>;
 179                         compatible = "lantiq,xrx200-net";
 180                         reg = < 0xE108000 0x3000 /* switch */
 181                                 0xE10B100 0x70 /* mdio */
 182                                 0xE10B1D8 0x30 /* mii */
 183                                 0xE10B308 0x30 /* pmac */
 184                         >;
 185                         interrupt-parent = <&icu0>;
 186                         interrupts = <75 73 72>;
 187                 };
 188
 189                 mei@E116000 {
 190                         compatible = "lantiq,mei-xrx200";
 191                         reg = <0xE116000 0x9c>;
 192                         interrupt-parent = <&icu0>;
 193                         interrupts = <63>;
 194                 };
 195
 196                 ppe@E234000 {
 197                         compatible = "lantiq,ppe-xrx200";
 198                         interrupt-parent = <&icu0>;
 199                         interrupts = <96>;
 200                 };
 201
 202                 pcie@d900000 {
 203                         interrupt-parent = <&icu0>;
 204                         interrupts = <161 144>;
 205                         compatible = "lantiq,pcie-xrx200";
 206                         gpio-reset = <&gpio 38 GPIO_ACTIVE_HIGH>;
 207                 };
 208
 209                 pci0: pci@E105400 {
 210                         #address-cells = <3>;
 211                         #size-cells = <2>;
 212                         #interrupt-cells = <1>;
 213                         compatible = "lantiq,pci-xway";
 214                         bus-range = <0x0 0x0>;
 215                         ranges = <0x2000000 0 0x8000000 0x8000000 0 0x2000000   /* pci memory */
 216                                 0x1000000 0 0x00000000 0xAE00000 0 0x200000>; /* io space */
 217                         reg = <0x7000000 0x8000         /* config space */
 218                                 0xE105400 0x400>;       /* pci bridge */
 219                         status = "disabled";
 220                 };
 221         };
 222
 223         vdsl {
 224                 compatible = "lantiq,vdsl-vrx200";
 225         };
 226 };