target/linux/lantiq/files-4.14/arch/mips/boot/dts/ARV7519RW22.dts

   1 /dts-v1/;
   2
   3 #include "vr9.dtsi"
   4
   5 #include <dt-bindings/input/input.h>
   6 #include <dt-bindings/mips/lantiq_rcu_gphy.h>
   7
   8 / {
   9         compatible = "arcadyan,arv7519rw22", "lantiq,xway", "lantiq,vr9";
  10         model = "Orange Livebox 2.1";
  11
  12         chosen {
  13                 bootargs = "console=ttyLTQ0,115200";
  14         };
  15
  16         aliases {
  17                 led-boot = &power_green;
  18                 led-failsafe = &power_green;
  19                 led-running = &power_green;
  20
  21                 led-dsl = &internet_green;
  22         };
  23
  24         memory@0 {
  25                 reg = <0x0 0x8000000>;
  26         };
  27
  28         gpio-keys-polled {
  29                 compatible = "gpio-keys-polled";
  30                 #address-cells = <1>;
  31                 #size-cells = <0>;
  32                 poll-interval = <100>;
  33
  34                 reset {
  35                         label = "reset";
  36                         gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
  37                         linux,code = <KEY_RESTART>;
  38                 };
  39                 rfkill {
  40                         label = "rfkill";
  41                         gpios = <&gpio 33 GPIO_ACTIVE_LOW>;
  42                         linux,code = <KEY_RFKILL>;
  43                 };
  44                 wps {
  45                         label = "wps";
  46                         gpios = <&gpio 37 GPIO_ACTIVE_LOW>;
  47                         linux,code = <KEY_WPS_BUTTON>;
  48                 };
  49         };
  50
  51         gpio-leds {
  52                 compatible = "gpio-leds";
  53
  54                 lan_green {
  55                         label = "arv7519rw22:green:lan";
  56                         gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
  57                 };
  58                 internet_red {
  59                         label = "arv7519rw22:red:internet";
  60                         gpios = <&gpio 10 GPIO_ACTIVE_LOW>;
  61                 };
  62                 power_green: power_green {
  63                         label = "arv7519rw22:green:power";
  64                         gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
  65                         default-state = "keep";
  66                 };
  67                 alarm_blue {
  68                         label = "arv7519rw22:blue:alarm";
  69                         gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
  70                 };
  71                 internet_orange {
  72                         label = "arv7519rw22:orange:internet";
  73                         gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
  74                 };
  75                 internet_green: internet_green {
  76                         label = "arv7519rw22:green:internet";
  77                         gpios = <&gpio 28 GPIO_ACTIVE_LOW>;
  78                 };
  79                 voice_green {
  80                         label = "arv7519rw22:green:voice";
  81                         gpios = <&gpio 29 GPIO_ACTIVE_LOW>;
  82                 };
  83         };
  84
  85         usb_vbus: regulator-usb-vbus {
  86                 compatible = "regulator-fixed";
  87
  88                 regulator-name = "USB_VBUS";
  89
  90                 regulator-min-microvolt = <5000000>;
  91                 regulator-max-microvolt = <5000000>;
  92
  93                 gpio = <&gpio 32 GPIO_ACTIVE_HIGH>;
  94                 enable-active-high;
  95         };
  96 };
  97
  98 &eth0 {
  99         lan: interface@0 {
 100                 compatible = "lantiq,xrx200-pdi";
 101                 #address-cells = <1>;
 102                 #size-cells = <0>;
 103                 reg = <0>;
 104                 mtd-mac-address = <&boardconfig 0x16>;
 105                 lantiq,switch;
 106
 107                 ethernet@0 {
 108                         compatible = "lantiq,xrx200-pdi-port";
 109                         reg = <0>;
 110                         phy-mode = "rgmii";
 111                         phy-handle = <&phy0>;
 112                 };
 113                 ethernet@1 {
 114                         compatible = "lantiq,xrx200-pdi-port";
 115                         reg = <4>;
 116                         phy-mode = "mii";
 117                         phy-handle = <&phy13>;
 118                 };
 119                 ethernet@2 {
 120                         compatible = "lantiq,xrx200-pdi-port";
 121                         reg = <5>;
 122                         phy-mode = "mii";
 123                         phy-handle = <&phy14>;
 124                 };
 125                 ethernet@3 {
 126                         compatible = "lantiq,xrx200-pdi-port";
 127                         reg = <2>;
 128                         phy-mode = "mii";
 129                         phy-handle = <&phy11>;
 130                 };
 131                 ethernet@4 {
 132                         compatible = "lantiq,xrx200-pdi-port";
 133                         reg = <3>;
 134                         phy-mode = "mii";
 135                         phy-handle = <&phy12>;
 136                 };
 137         };
 138
 139         mdio@0 {
 140                 #address-cells = <1>;
 141                 #size-cells = <0>;
 142                 compatible = "lantiq,xrx200-mdio";
 143                 reg = <0>;
 144
 145                 phy0: ethernet-phy@0 {
 146                         reg = <0x0>;
 147                         compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
 148                 };
 149                 phy11: ethernet-phy@11 {
 150                         reg = <0x11>;
 151                         compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
 152                 };
 153                 phy12: ethernet-phy@12 {
 154                         reg = <0x12>;
 155                         compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
 156                 };
 157                 phy13: ethernet-phy@13 {
 158                         reg = <0x13>;
 159                         compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
 160                 };
 161                 phy14: ethernet-phy@14 {
 162                         reg = <0x14>;
 163                         compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
 164                 };
 165         };
 166 };
 167
 168 &gphy0 {
 169         lantiq,gphy-mode = <GPHY_MODE_FE>;
 170 };
 171
 172 &gphy1 {
 173         lantiq,gphy-mode = <GPHY_MODE_FE>;
 174 };
 175
 176 &gpio {
 177         pinctrl-names = "default";
 178         pinctrl-0 = <&state_default>;
 179
 180         state_default: pinmux {
 181                 mdio {
 182                         lantiq,groups = "mdio";
 183                         lantiq,function = "mdio";
 184                 };
 185                 pcie-rst {
 186                         lantiq,pins = "io21";
 187                         lantiq,pull = <0>;
 188                         lantiq,output = <1>;
 189                 };
 190         };
 191 };
 192
 193 &localbus {
 194         nor@0 {
 195                 compatible = "lantiq,nor";
 196                 bank-width = <2>;
 197                 reg = <0 0x0 0x2000000>;
 198                 #address-cells = <1>;
 199                 #size-cells = <1>;
 200
 201                 partitions {
 202                         compatible = "fixed-partitions";
 203                         #address-cells = <1>;
 204                         #size-cells = <1>;
 205
 206                         partition@0 {
 207                                 label = "uboot";
 208                                 reg = <0x0 0x60000>;
 209                                 read-only;
 210                         };
 211
 212                         partition@60000 {
 213                                 label = "uboot-env";
 214                                 reg = <0x60000 0x20000>;
 215                                 read-only;
 216                         };
 217
 218                         partition@80000 {
 219                                 label = "firmware";
 220                                 reg = <0x80000 0x1f00000>;
 221                         };
 222
 223                         boardconfig: partition@1f80000 {
 224                                 label = "boardconfig";
 225                                 reg = <0x1f80000 0x80000>;
 226                                 read-only;
 227                         };
 228                 };
 229         };
 230 };
 231
 232 &pcie0 {
 233         status = "okay";
 234         gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
 235 };
 236
 237 &usb_phy0 {
 238         status = "okay";
 239         phy-supply = <&usb_vbus>;
 240 };
 241
 242 &usb_phy1 {
 243         status = "okay";
 244         phy-supply = <&usb_vbus>;
 245 };
 246
 247 &usb0 {
 248         status = "okay";
 249 };
 250
 251 &usb1 {
 252         status = "okay";
 253 };