target/linux/lantiq/files-4.14/arch/mips/boot/dts/FRITZ3370.dts

   1 /dts-v1/;
   2
   3 #include "vr9.dtsi"
   4
   5 #include <dt-bindings/input/input.h>
   6 #include <dt-bindings/mips/lantiq_rcu_gphy.h>
   7
   8 / {
   9         compatible = "avm,fritz3370", "lantiq,xway", "lantiq,vr9";
  10         model = "Fritz!Box WLAN 3370";
  11
  12         chosen {
  13                 bootargs = "console=ttyLTQ0,115200 ubi.mtd=1,512 root=/dev/mtdblock9";
  14         };
  15
  16         aliases {
  17                 led-boot = &power_green;
  18                 led-failsafe = &power_red;
  19                 led-running = &power_green;
  20
  21                 led-dsl = &dsl;
  22                 led-internet = &info_green;
  23                 led-wifi = &wifi;
  24         };
  25
  26         memory@0 {
  27                 reg = <0x0 0x8000000>;
  28         };
  29
  30         gpio-keys-polled {
  31                 compatible = "gpio-keys-polled";
  32                 #address-cells = <1>;
  33                 #size-cells = <0>;
  34                 poll-interval = <100>;
  35                 power {
  36                         label = "power";
  37                         gpios = <&gpio 1 GPIO_ACTIVE_HIGH>;
  38                         linux,code = <KEY_POWER>;
  39                 };
  40 /*              wifi {
  41                         label = "wifi";
  42                         gpios = <&gpio 29 GPIO_ACTIVE_HIGH>;
  43                         linux,code = <BTN_1>;
  44                 };*/
  45         };
  46
  47         gpio-leds {
  48                 compatible = "gpio-leds";
  49
  50                 power_green: power {
  51                         label = "fritz3370:green:power";
  52                         gpios = <&gpio 32 GPIO_ACTIVE_LOW>;
  53                         default-state = "keep";
  54                 };
  55                 power_red: power2 {
  56                         label = "fritz3370:red:power";
  57                         gpios = <&gpio 33 GPIO_ACTIVE_LOW>;
  58                 };
  59                 info_red {
  60                         label = "fritz3370:red:info";
  61                         gpios = <&gpio 34 GPIO_ACTIVE_LOW>;
  62                 };
  63                 wifi: wifi {
  64                         label = "fritz3370:green:wlan";
  65                         gpios = <&gpio 35 GPIO_ACTIVE_LOW>;
  66                 };
  67                 dsl: dsl {
  68                         label = "fritz3370:green:dsl";
  69                         gpios = <&gpio 36 GPIO_ACTIVE_LOW>;
  70                 };
  71                 lan {
  72                         label = "fritz3370:green:lan";
  73                         gpios = <&gpio 38 GPIO_ACTIVE_LOW>;
  74                 };
  75                 info_green: info_green {
  76                         label = "fritz3370:green:info";
  77                         gpios = <&gpio 47 GPIO_ACTIVE_LOW>;
  78                 };
  79         };
  80 };
  81
  82 &eth0 {
  83         lan: interface@0 {
  84                 compatible = "lantiq,xrx200-pdi";
  85                 #address-cells = <1>;
  86                 #size-cells = <0>;
  87                 reg = <0>;
  88                 mtd-mac-address = <&urlader 0x987>;
  89                 mtd-mac-address-increment = <(-2)>;
  90                 lantiq,switch;
  91
  92                 ethernet@0 {
  93                         compatible = "lantiq,xrx200-pdi-port";
  94                         reg = <0>;
  95                         phy-mode = "rgmii";
  96                         phy-handle = <&phy0>;
  97                         gpios = <&gpio 37 GPIO_ACTIVE_HIGH>;
  98                 };
  99                 ethernet@1 {
 100                         compatible = "lantiq,xrx200-pdi-port";
 101                         reg = <1>;
 102                         phy-mode = "rgmii";
 103                         phy-handle = <&phy1>;
 104                         gpios = <&gpio 44 GPIO_ACTIVE_HIGH>;
 105                 };
 106                 ethernet@2 {
 107                         compatible = "lantiq,xrx200-pdi-port";
 108                         reg = <2>;
 109                         phy-mode = "gmii";
 110                         phy-handle = <&phy11>;
 111                 };
 112                 ethernet@3 {
 113                         compatible = "lantiq,xrx200-pdi-port";
 114                         reg = <4>;
 115                         phy-mode = "gmii";
 116                         phy-handle = <&phy13>;
 117                 };
 118         };
 119
 120         mdio@0 {
 121                 #address-cells = <1>;
 122                 #size-cells = <0>;
 123                 compatible = "lantiq,xrx200-mdio";
 124                 reg = <0>;
 125
 126                 phy0: ethernet-phy@0 {
 127                         reg = <0x0>;
 128                         compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
 129                 };
 130                 phy1: ethernet-phy@1 {
 131                         reg = <0x1>;
 132                         compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
 133                 };
 134                 phy11: ethernet-phy@11 {
 135                         reg = <0x11>;
 136                         compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
 137                 };
 138                 phy13: ethernet-phy@13 {
 139                         reg = <0x13>;
 140                         compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
 141                 };
 142         };
 143 };
 144
 145 &gphy0 {
 146         lantiq,gphy-mode = <GPHY_MODE_GE>;
 147 };
 148
 149 &gphy1 {
 150         lantiq,gphy-mode = <GPHY_MODE_GE>;
 151 };
 152
 153 &gpio {
 154         pinctrl-names = "default";
 155         pinctrl-0 = <&state_default>;
 156
 157         state_default: pinmux {
 158                 mdio {
 159                         lantiq,groups = "mdio";
 160                         lantiq,function = "mdio";
 161                 };
 162                 nand {
 163                         lantiq,groups = "nand cle", "nand ale",
 164                                         "nand rd", "nand cs1", "nand rdy";
 165                         lantiq,function = "ebu";
 166                         lantiq,pull = <1>;
 167                 };
 168                 phy-rst {
 169                         lantiq,pins = "io37", "io44";
 170                         lantiq,pull = <0>;
 171                         lantiq,open-drain = <0>;
 172                         lantiq,output = <1>;
 173                 };
 174                 pcie-rst {
 175                         lantiq,pins = "io38";
 176                         lantiq,pull = <0>;
 177                         lantiq,output = <1>;
 178                 };
 179         };
 180         pins_spi_default: pins_spi_default {
 181                 spi_in {
 182                         lantiq,groups = "spi_di";
 183                         lantiq,function = "spi";
 184                 };
 185                 spi_out {
 186                         lantiq,groups = "spi_do", "spi_clk",
 187                                 "spi_cs4";
 188                         lantiq,function = "spi";
 189                         lantiq,output = <1>;
 190                 };
 191         };
 192 };
 193
 194 &localbus {
 195         nand@1 {
 196                 compatible = "lantiq,nand-xway";
 197                 bank-width = <2>;
 198                 reg = <1 0x0 0x2000000>;
 199                 #address-cells = <1>;
 200                 #size-cells = <1>;
 201
 202                 partitions {
 203                         compatible = "fixed-partitions";
 204                         #address-cells = <1>;
 205                         #size-cells = <1>;
 206
 207                         partition@0 {
 208                                 label = "kernel";
 209                                 reg = <0x0 0x400000>;
 210                         };
 211
 212                         partition@400000 {
 213                                 label = "rootfs_ubi";
 214                                 reg = <0x400000 0x3000000>;
 215                         };
 216
 217                         partition@3400000 {
 218                                 label = "vr9_firmware";
 219                                 reg = <0x3400000 0x400000>;
 220                         };
 221                         partition@3800000 {
 222                                 label = "reserved";
 223                                 reg = <0x3800000 0x3000000>;
 224                         };
 225                         partition@6800000 {
 226                                 label = "config";
 227                                 reg = <0x6800000 0x200000>;
 228                         };
 229                         partition@6a00000 {
 230                                 label = "nand-filesystem";
 231                                 reg = <0x6a00000 0x1600000>;
 232                         };
 233                 };
 234         };
 235 };
 236
 237 &pcie0 {
 238         pcie@0 {
 239                 reg = <0 0 0 0 0>;
 240                 #interrupt-cells = <1>;
 241                 #size-cells = <2>;
 242                 #address-cells = <3>;
 243                 device_type = "pci";
 244
 245                 wifi@0,0 {
 246                         compatible = "pci0,0";
 247                         reg = <0 0 0 0 0>;
 248                         qca,no-eeprom; /* load from ath9k-eeprom-pci-0000:01:00.0.bin */
 249                 };
 250         };
 251 };
 252
 253 &spi {
 254         status = "okay";
 255
 256         pinctrl-names = "default";
 257         pinctrl-0 = <&pins_spi_default>;
 258
 259         m25p80@4 {
 260                 #address-cells = <1>;
 261                 #size-cells = <1>;
 262                 compatible = "jedec,spi-nor";
 263                 reg = <4 0>;
 264                 spi-max-frequency = <1000000>;
 265
 266                 urlader: partition@0 {
 267                         reg = <0x0 0x20000>;
 268                         label = "urlader";
 269                         read-only;
 270                 };
 271
 272                 partition@20000 {
 273                         reg = <0x20000 0x10000>;
 274                         label = "tffs (1)";
 275                         read-only;
 276                 };
 277
 278                 partition@30000 {
 279                         reg = <0x30000 0x10000>;
 280                         label = "tffs (2)";
 281                         read-only;
 282                 };
 283         };
 284 };
 285
 286 /*
 287  * TODO: add phy-supply, gpio 5 GPIO_ACTIVE_HIGH and gpio 14 GPIO_ACTIVE_HIGH are
 288  * related
 289  */
 290 &usb_phy0 {
 291         status = "okay";
 292 };
 293
 294 &usb0 {
 295         status = "okay";
 296 };