target/linux/lantiq/files-4.14/arch/mips/boot/dts/FRITZ3370.dts

   1 /dts-v1/;
   2
   3 #include "vr9.dtsi"
   4
   5 #include <dt-bindings/input/input.h>
   6
   7 / {
   8         compatible = "avm,fritz3370", "lantiq,xway", "lantiq,vr9";
   9         model = "Fritz!Box WLAN 3370";
  10
  11         chosen {
  12                 bootargs = "console=ttyLTQ0,115200 ubi.mtd=1,512 root=/dev/mtdblock9";
  13         };
  14
  15         aliases {
  16                 led-boot = &power_green;
  17                 led-failsafe = &power_red;
  18                 led-running = &power_green;
  19
  20                 led-dsl = &dsl;
  21                 led-internet = &info_green;
  22                 led-wifi = &wifi;
  23         };
  24
  25         memory@0 {
  26                 reg = <0x0 0x8000000>;
  27         };
  28
  29         fpi@10000000 {
  30                 localbus@0 {
  31                         nand-parts@0 {
  32                                 compatible = "lantiq,nand-xway";
  33                                 bank-width = <2>;
  34                                 reg = <1 0x0 0x2000000>;
  35                                 #address-cells = <1>;
  36                                 #size-cells = <1>;
  37
  38                                 partitions {
  39                                         compatible = "fixed-partitions";
  40                                         #address-cells = <1>;
  41                                         #size-cells = <1>;
  42
  43                                         partition@0 {
  44                                                 label = "kernel";
  45                                                 reg = <0x0 0x400000>;
  46                                         };
  47
  48                                         partition@400000 {
  49                                                 label = "rootfs_ubi";
  50                                                 reg = <0x400000 0x3000000>;
  51                                         };
  52
  53                                         partition@3400000 {
  54                                                 label = "vr9_firmware";
  55                                                 reg = <0x3400000 0x400000>;
  56                                         };
  57                                         partition@3800000 {
  58                                                 label = "reserved";
  59                                                 reg = <0x3800000 0x3000000>;
  60                                         };
  61                                         partition@6800000 {
  62                                                 label = "config";
  63                                                 reg = <0x6800000 0x200000>;
  64                                         };
  65                                         partition@6a00000 {
  66                                                 label = "nand-filesystem";
  67                                                 reg = <0x6a00000 0x1600000>;
  68                                         };
  69                                 };
  70                         };
  71                 };
  72
  73                 gpio: pinmux@E100B10 {
  74                         pinctrl-names = "default";
  75                         pinctrl-0 = <&state_default>;
  76
  77                         state_default: pinmux {
  78                                 mdio {
  79                                         lantiq,groups = "mdio";
  80                                         lantiq,function = "mdio";
  81                                 };
  82                                 nand {
  83                                         lantiq,groups = "nand cle", "nand ale",
  84                                                         "nand rd", "nand cs1", "nand rdy";
  85                                         lantiq,function = "ebu";
  86                                         lantiq,pull = <1>;
  87                                 };
  88                                 phy-rst {
  89                                         lantiq,pins = "io37", "io44";
  90                                         lantiq,pull = <0>;
  91                                         lantiq,open-drain = <0>;
  92                                         lantiq,output = <1>;
  93                                 };
  94                                 pcie-rst {
  95                                         lantiq,pins = "io38";
  96                                         lantiq,pull = <0>;
  97                                         lantiq,output = <1>;
  98                                 };
  99                         };
 100                         pins_spi_default: pins_spi_default {
 101                                 spi_in {
 102                                         lantiq,groups = "spi_di";
 103                                         lantiq,function = "spi";
 104                                 };
 105                                 spi_out {
 106                                         lantiq,groups = "spi_do", "spi_clk",
 107                                                 "spi_cs4";
 108                                         lantiq,function = "spi";
 109                                         lantiq,output = <1>;
 110                                 };
 111                         };
 112                 };
 113
 114                 ifxhcd@E101000 {
 115                         status = "okay";
 116                         gpios = <&gpio 5 GPIO_ACTIVE_HIGH
 117                                 &gpio 14 GPIO_ACTIVE_HIGH>;
 118                         lantiq,portmask = <0x3>;
 119                 };
 120         };
 121
 122         gphy-xrx200 {
 123                 compatible = "lantiq,phy-xrx200";
 124                 firmware = "lantiq/xrx200_phy11g_a14.bin";
 125                 phys = [ 00 01 ];
 126         };
 127
 128         gpio-keys-polled {
 129                 compatible = "gpio-keys-polled";
 130                 #address-cells = <1>;
 131                 #size-cells = <0>;
 132                 poll-interval = <100>;
 133                 power {
 134                         label = "power";
 135                         gpios = <&gpio 1 GPIO_ACTIVE_HIGH>;
 136                         linux,code = <KEY_POWER>;
 137                 };
 138 /*              wifi {
 139                         label = "wifi";
 140                         gpios = <&gpio 29 GPIO_ACTIVE_HIGH>;
 141                         linux,code = <BTN_1>;
 142                 };*/
 143         };
 144
 145         gpio-leds {
 146                 compatible = "gpio-leds";
 147
 148                 power_green: power {
 149                         label = "fritz3370:green:power";
 150                         gpios = <&gpio 32 GPIO_ACTIVE_LOW>;
 151                         default-state = "keep";
 152                 };
 153                 power_red: power2 {
 154                         label = "fritz3370:red:power";
 155                         gpios = <&gpio 33 GPIO_ACTIVE_LOW>;
 156                 };
 157                 info_red {
 158                         label = "fritz3370:red:info";
 159                         gpios = <&gpio 34 GPIO_ACTIVE_LOW>;
 160                 };
 161                 wifi: wifi {
 162                         label = "fritz3370:green:wlan";
 163                         gpios = <&gpio 35 GPIO_ACTIVE_LOW>;
 164                 };
 165                 dsl: dsl {
 166                         label = "fritz3370:green:dsl";
 167                         gpios = <&gpio 36 GPIO_ACTIVE_LOW>;
 168                 };
 169                 lan {
 170                         label = "fritz3370:green:lan";
 171                         gpios = <&gpio 38 GPIO_ACTIVE_LOW>;
 172                 };
 173                 info_green: info_green {
 174                         label = "fritz3370:green:info";
 175                         gpios = <&gpio 47 GPIO_ACTIVE_LOW>;
 176                 };
 177         };
 178 };
 179
 180 &spi {
 181         pinctrl-names = "default";
 182         pinctrl-0 = <&pins_spi_default>;
 183
 184         status = "ok";
 185
 186         m25p80@4 {
 187                 #address-cells = <1>;
 188                 #size-cells = <1>;
 189                 compatible = "jedec,spi-nor";
 190                 reg = <4 0>;
 191                 spi-max-frequency = <1000000>;
 192
 193                 urlader: partition@0 {
 194                         reg = <0x0 0x20000>;
 195                         label = "urlader";
 196                         read-only;
 197                 };
 198
 199                 partition@20000 {
 200                         reg = <0x20000 0x10000>;
 201                         label = "tffs (1)";
 202                         read-only;
 203                 };
 204
 205                 partition@30000 {
 206                         reg = <0x30000 0x10000>;
 207                         label = "tffs (2)";
 208                         read-only;
 209                 };
 210         };
 211 };
 212
 213 &eth0 {
 214         lan: interface@0 {
 215                 compatible = "lantiq,xrx200-pdi";
 216                 #address-cells = <1>;
 217                 #size-cells = <0>;
 218                 reg = <0>;
 219                 mtd-mac-address = <&urlader 0x987>;
 220                 mtd-mac-address-increment = <(-2)>;
 221                 lantiq,switch;
 222
 223                 ethernet@0 {
 224                         compatible = "lantiq,xrx200-pdi-port";
 225                         reg = <0>;
 226                         phy-mode = "rgmii";
 227                         phy-handle = <&phy0>;
 228                         gpios = <&gpio 37 GPIO_ACTIVE_HIGH>;
 229                 };
 230                 ethernet@1 {
 231                         compatible = "lantiq,xrx200-pdi-port";
 232                         reg = <1>;
 233                         phy-mode = "rgmii";
 234                         phy-handle = <&phy1>;
 235                         gpios = <&gpio 44 GPIO_ACTIVE_HIGH>;
 236                 };
 237                 ethernet@2 {
 238                         compatible = "lantiq,xrx200-pdi-port";
 239                         reg = <2>;
 240                         phy-mode = "gmii";
 241                         phy-handle = <&phy11>;
 242                 };
 243                 ethernet@3 {
 244                         compatible = "lantiq,xrx200-pdi-port";
 245                         reg = <4>;
 246                         phy-mode = "gmii";
 247                         phy-handle = <&phy13>;
 248                 };
 249         };
 250
 251         mdio@0 {
 252                 #address-cells = <1>;
 253                 #size-cells = <0>;
 254                 compatible = "lantiq,xrx200-mdio";
 255                 phy0: ethernet-phy@0 {
 256                         reg = <0x0>;
 257                         compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
 258                 };
 259                 phy1: ethernet-phy@1 {
 260                         reg = <0x1>;
 261                         compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
 262                 };
 263                 phy11: ethernet-phy@11 {
 264                         reg = <0x11>;
 265                         compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
 266                 };
 267                 phy13: ethernet-phy@13 {
 268                         reg = <0x13>;
 269                         compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
 270                 };
 271         };
 272 };
 273
 274 &pcie0 {
 275         pcie@0 {
 276                 reg = <0 0 0 0 0>;
 277                 #interrupt-cells = <1>;
 278                 #size-cells = <2>;
 279                 #address-cells = <3>;
 280                 device_type = "pci";
 281
 282                 wifi@0,0 {
 283                         compatible = "pci0,0";
 284                         reg = <0 0 0 0 0>;
 285                         qca,no-eeprom; /* load from ath9k-eeprom-pci-0000:01:00.0.bin */
 286                 };
 287         };
 288 };