target/linux/lantiq/files-4.9/arch/mips/boot/dts/VGV7519.dtsi

   1 #include "vr9.dtsi"
   2
   3 #include <dt-bindings/input/input.h>
   4
   5 / {
   6         compatible = "arcadyan,vgv7519", "lantiq,xway", "lantiq,vr9";
   7
   8         chosen {
   9                 bootargs = "console=ttyLTQ0,115200 mem=62M vpe1_load_addr=0x83e00000 vpe1_mem=2M maxvpes=1 maxtcs=1 nosmp";
  10         };
  11
  12         aliases {
  13                 led-boot = &power_green;
  14                 led-failsafe = &power_red;
  15                 led-running = &power_green;
  16
  17                 led-dsl = &broadband_green;
  18                 led-internet = &internet_green;
  19                 led-wifi = &wireless_green;
  20         };
  21
  22         sram@1F000000 {
  23                 vmmc@107000 {
  24                         status = "okay";
  25                         gpios = <&gpio 30 GPIO_ACTIVE_HIGH  //fxs relay
  26                                  &gpio 31 GPIO_ACTIVE_HIGH  //still unknown
  27                                  &gpio 3  GPIO_ACTIVE_HIGH>; //reset_slic?
  28                 };
  29         };
  30
  31         memory@0 {
  32                 reg = <0x0 0x4000000>;
  33         };
  34
  35         fpi@10000000 {
  36                 localbus@0 {
  37                         nor-boot@0 {
  38                                 compatible = "lantiq,nor";
  39                                 bank-width = <2>;
  40                                 reg = <0 0x0 0x800000>, <1 0x800000 0x800000>;
  41                                 #address-cells = <1>;
  42                                 #size-cells = <1>;
  43
  44                                 partitions {
  45                                         compatible = "fixed-partitions";
  46                                         #address-cells = <1>;
  47                                         #size-cells = <1>;
  48
  49                                         boardconfig: partition@40000 {
  50                                                 label = "board_config";
  51                                                 reg = <0x40000 0x10000>;
  52                                                 read-only;
  53                                         };
  54                                 };
  55                         };
  56                 };
  57
  58                 gpio: pinmux@E100B10 {
  59                         pinctrl-names = "default";
  60                         pinctrl-0 = <&state_default>;
  61
  62                         state_default: pinmux {
  63                                 stp {
  64                                         lantiq,groups = "stp";
  65                                         lantiq,function = "stp";
  66                                         lantiq,open-drain = <0>;
  67                                         lantiq,output = <1>;
  68                                         lantiq,pull = <0>;
  69                                 };
  70                                 mdio {
  71                                         lantiq,groups = "mdio";
  72                                         lantiq,function = "mdio";
  73                                 };
  74                                 pci-rst {
  75                                         lantiq,pins = "io21";
  76                                         lantiq,open-drain = <0>;
  77                                         lantiq,pull = <0>;
  78                                         lantiq,output = <1>;
  79                                 };
  80                                 gphy-leds {
  81                                         lantiq,groups = "gphy0 led1", "gphy1 led0";
  82                                         lantiq,function = "gphy";
  83                                         lantiq,open-drain = <0>;
  84                                         lantiq,pull = <0>;
  85                                         lantiq,output = <1>;
  86                                 };
  87                         };
  88                 };
  89
  90                 stp: stp@E100BB0 {
  91                         compatible = "lantiq,gpio-stp-xway";
  92                         reg = <0xE100BB0 0x40>;
  93                         #gpio-cells = <2>;
  94                         gpio-controller;
  95
  96                         lantiq,shadow = <0xffff>;
  97                         lantiq,groups = <0x3>;
  98                         lantiq,dsl = <0x0>;
  99                         lantiq,phy1 = <0x0>;
 100                         lantiq,phy2 = <0x0>;
 101                         /* lantiq,rising; */
 102                 };
 103
 104                 ifxhcd@E101000 {
 105                         status = "okay";
 106                         gpios = <&gpio 32 GPIO_ACTIVE_HIGH>;
 107                         lantiq,portmask = <0x3>;
 108                 };
 109
 110                 ifxhcd@E106000 {
 111                         status = "okay";
 112                         gpios = <&gpio 32 GPIO_ACTIVE_HIGH>;
 113                 };
 114
 115                 pcie@d900000 {
 116                         status = "disabled";
 117                 };
 118         };
 119
 120         gphy-xrx200 {
 121                 compatible = "lantiq,phy-xrx200";
 122                 firmware1 = "lantiq/xrx200_phy11g_a14.bin";     /*VR9 1.1*/
 123                 firmware2 = "lantiq/xrx200_phy11g_a22.bin";     /*VR9 1.2*/
 124                 phys = [ 00 01 ];
 125         };
 126
 127         gpio-keys-polled {
 128                 compatible = "gpio-keys-polled";
 129                 #address-cells = <1>;
 130                 #size-cells = <0>;
 131                 poll-interval = <100>;
 132                 reset {
 133                         label = "reset";
 134                         gpios = <&gpio 9 GPIO_ACTIVE_LOW>;
 135                         linux,code = <KEY_RESTART>;
 136                 };
 137                 eco {
 138                         label = "eco";
 139                         gpios = <&gpio 41 GPIO_ACTIVE_LOW>;
 140                         linux,code = <BTN_0>;
 141                 };
 142                 rfkill {
 143                         label = "rfkill";
 144                         gpios = <&gpio 45 GPIO_ACTIVE_LOW>;
 145                         linux,code = <KEY_RFKILL>;
 146                 };
 147                 wps {
 148                         label = "wps";
 149                         gpios = <&gpio 10 GPIO_ACTIVE_LOW>;
 150                         linux,code = <KEY_WPS_BUTTON>;
 151                 };
 152         };
 153
 154         gpio-leds {
 155                 compatible = "gpio-leds";
 156
 157                 eco {
 158                         label = "vgv7519:blue:eco";
 159                         gpios = <&stp 2 GPIO_ACTIVE_LOW>;
 160                 };
 161                 wps_red {
 162                         label = "vgv7519:red:wps";
 163                         gpios = <&stp 3 GPIO_ACTIVE_LOW>;
 164                 };
 165                 wps_green {
 166                         label = "vgv7519:green:wps";
 167                         gpios = <&stp 4 GPIO_ACTIVE_LOW>;
 168                 };
 169                 upgrade {
 170                         label = "vgv7519:blue:upgrade";
 171                         gpios = <&stp 5 GPIO_ACTIVE_LOW>;
 172                 };
 173                 tv {
 174                         label = "vgv7519:green:tv";
 175                         gpios = <&stp 6 GPIO_ACTIVE_LOW>;
 176                 };
 177                 internet_green: internet_green {
 178                         label = "vgv7519:green:internet";
 179                         gpios = <&stp 7 GPIO_ACTIVE_LOW>;
 180                 };
 181                 internet_red {
 182                         label = "vgv7519:red:internet";
 183                         gpios = <&stp 8 GPIO_ACTIVE_LOW>;
 184                 };
 185                 broadband_red {
 186                         label = "vgv7519:red:broadband";
 187                         gpios = <&stp 9 GPIO_ACTIVE_LOW>;
 188                 };
 189                 broadband_green: broadband_green {
 190                         label = "vgv7519:green:broadband";
 191                         gpios = <&stp 10 GPIO_ACTIVE_LOW>;
 192                 };
 193                 voice {
 194                         label = "vgv7519:green:voice";
 195                         gpios = <&stp 11 GPIO_ACTIVE_LOW>;
 196                 };
 197                 wireless_red {
 198                         label = "vgv7519:red:wireless";
 199                         gpios = <&stp 12 GPIO_ACTIVE_LOW>;
 200                 };
 201                 wireless_green: wireless_green {
 202                         label = "vgv7519:green:wireless";
 203                         gpios = <&stp 13 GPIO_ACTIVE_LOW>;
 204                 };
 205                 power_green: power2 {
 206                         label = "vgv7519:green:power";
 207                         gpios = <&stp 14 GPIO_ACTIVE_LOW>;
 208                         default-state = "keep";
 209                 };
 210                 power_red: power {
 211                         label = "vgv7519:red:power";
 212                         gpios = <&stp 15 GPIO_ACTIVE_LOW>;
 213                 };
 214         };
 215 };
 216
 217 &pci0 {
 218         status = "okay";
 219         gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
 220
 221         wifi@1814,3091 {
 222                 compatible = "pci1814,3091";
 223                 reg = <0x7000 0 0 0 0>;
 224                 ralink,mtd-eeprom = <&boardconfig 0x410>;
 225                 ralink,mtd-eeprom-swap;
 226                 mtd-mac-address = <&boardconfig 0x16>;
 227                 mtd-mac-address-increment = <1>;
 228         };
 229 };
 230
 231 &eth0 {
 232         lan: interface@0 {
 233                 compatible = "lantiq,xrx200-pdi";
 234                 #address-cells = <1>;
 235                 #size-cells = <0>;
 236                 reg = <0>;
 237                 mtd-mac-address = <&boardconfig 0x16>;
 238                 mtd-mac-address-increment = <1>;
 239                 lantiq,switch;
 240
 241                 ethernet@0 {
 242                         compatible = "lantiq,xrx200-pdi-port";
 243                         reg = <0>;
 244                         phy-mode = "rgmii";
 245                         phy-handle = <&phy0>;
 246                 };
 247                 ethernet@1 {
 248                         compatible = "lantiq,xrx200-pdi-port";
 249                         reg = <1>;
 250                         phy-mode = "rgmii";
 251                         phy-handle = <&phy1>;
 252                 };
 253                 ethernet@2 {
 254                         compatible = "lantiq,xrx200-pdi-port";
 255                         reg = <2>;
 256                         phy-mode = "gmii";
 257                         phy-handle = <&phy11>;
 258                 };
 259                 ethernet@4 {
 260                         compatible = "lantiq,xrx200-pdi-port";
 261                         reg = <4>;
 262                         phy-mode = "gmii";
 263                         phy-handle = <&phy13>;
 264                 };
 265                 ethernet@5 {
 266                         compatible = "lantiq,xrx200-pdi-port";
 267                         reg = <5>;
 268                         phy-mode = "rgmii";
 269                         phy-handle = <&phy5>;
 270                 };
 271         };
 272
 273         mdio@0 {
 274                 #address-cells = <1>;
 275                 #size-cells = <0>;
 276                 compatible = "lantiq,xrx200-mdio";
 277                 phy0: ethernet-phy@0 {
 278                         reg = <0x0>;
 279                         compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
 280                 };
 281                 phy1: ethernet-phy@1 {
 282                         reg = <0x1>;
 283                         compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
 284                 };
 285                 phy5: ethernet-phy@5 {
 286                         reg = <0x5>;
 287                         compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
 288                 };
 289                 phy11: ethernet-phy@11 {
 290                         reg = <0x11>;
 291                         compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
 292                 };
 293                 phy13: ethernet-phy@13 {
 294                         reg = <0x13>;
 295                         compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
 296                 };
 297         };
 298 };