target/linux/layerscape/image/armv8_64b.mk

   1 #
   2 # Copyright 2018-2020 NXP
   3 #
   4 # This is free software, licensed under the GNU General Public License v2.
   5 # See /LICENSE for more information.
   6 #
   7
   8 define Device/Default
   9   PROFILES := Default
  10   IMAGES := firmware.bin sysupgrade.bin
  11   FILESYSTEMS := squashfs
  12   KERNEL := kernel-bin | gzip | uImage gzip
  13   KERNEL_LOADADDR := 0x80080000
  14   KERNEL_ENTRY_POINT := 0x80080000
  15   DEVICE_DTS = freescale/$(subst _,-,$(1))
  16   SUPPORTED_DEVICES = $(subst _,$(comma),$(1))
  17   IMAGE_SIZE := 64m
  18   IMAGE/sysupgrade.bin := append-kernel | pad-to 16M | \
  19     append-rootfs | pad-rootfs | \
  20     check-size $(LS_SYSUPGRADE_IMAGE_SIZE) | append-metadata
  21 endef
  22
  23 define Device/fsl_ls1012a-frdm
  24   DEVICE_VENDOR := NXP
  25   DEVICE_MODEL := FRDM-LS1012A
  26   DEVICE_PACKAGES += \
  27     layerscape-ppfe \
  28     tfa-ls1012a-frdm \
  29     kmod-ppfe
  30   BLOCKSIZE := 256KiB
  31   IMAGE/firmware.bin := \
  32     ls-clean | \
  33     ls-append $(1)-bl2.pbl | pad-to 1M | \
  34     ls-append $(1)-fip.bin | pad-to 5M | \
  35     ls-append $(1)-uboot-env.bin | pad-to 10M | \
  36     ls-append pfe.itb | pad-to 15M | \
  37     ls-append-dtb $$(DEVICE_DTS) | pad-to 16M | \
  38     append-kernel | pad-to $$(BLOCKSIZE) | \
  39     append-rootfs | pad-rootfs | check-size
  40   IMAGE/sysupgrade.bin := append-kernel | pad-to $$(BLOCKSIZE) | \
  41     append-rootfs | pad-rootfs | \
  42     check-size $(LS_SYSUPGRADE_IMAGE_SIZE) | append-metadata
  43   KERNEL := kernel-bin | gzip | fit gzip $$(DTS_DIR)/$$(DEVICE_DTS).dtb
  44   KERNEL_INITRAMFS := kernel-bin | fit none $$(DTS_DIR)/$$(DEVICE_DTS).dtb
  45 endef
  46 TARGET_DEVICES += fsl_ls1012a-frdm
  47
  48 define Device/fsl_ls1012a-rdb
  49   DEVICE_VENDOR := NXP
  50   DEVICE_MODEL := LS1012A-RDB
  51   DEVICE_PACKAGES += \
  52     layerscape-ppfe \
  53     tfa-ls1012a-rdb \
  54     kmod-ppfe
  55   IMAGE/firmware.bin := \
  56     ls-clean | \
  57     ls-append $(1)-bl2.pbl | pad-to 1M | \
  58     ls-append $(1)-fip.bin | pad-to 5M | \
  59     ls-append $(1)-uboot-env.bin | pad-to 10M | \
  60     ls-append pfe.itb | pad-to 15M | \
  61     ls-append-dtb $$(DEVICE_DTS) | pad-to 16M | \
  62     append-kernel | pad-to 32M | \
  63     append-rootfs | pad-rootfs | check-size
  64 endef
  65 TARGET_DEVICES += fsl_ls1012a-rdb
  66
  67 define Device/fsl_ls1012a-frwy-sdboot
  68   DEVICE_VENDOR := NXP
  69   DEVICE_MODEL := FRWY-LS1012A
  70   DEVICE_PACKAGES += \
  71     layerscape-ppfe \
  72     tfa-ls1012a-frwy-sdboot \
  73     kmod-ppfe
  74   DEVICE_DTS := freescale/fsl-ls1012a-frwy
  75   FILESYSTEMS := ext4
  76   IMAGES := firmware.bin sdcard.img sysupgrade.bin
  77   IMAGE/firmware.bin := \
  78     ls-clean | \
  79     ls-append $(1)-bl2.pbl | pad-to 128K | \
  80     ls-append pfe.itb | pad-to 384K | \
  81     ls-append $(1)-fip.bin | pad-to 1856K | \
  82     ls-append $(1)-uboot-env.bin | pad-to 2048K | \
  83     check-size 2097153
  84   IMAGE/sdcard.img := \
  85     ls-clean | \
  86     ls-append-sdhead $(1) | pad-to 15M | \
  87     ls-append-dtb $$(DEVICE_DTS) | pad-to 16M | \
  88     append-kernel | pad-to $(LS_SD_ROOTFSPART_OFFSET)M | \
  89     append-rootfs | check-size $(LS_SD_IMAGE_SIZE)
  90   IMAGE/sysupgrade.bin := \
  91     ls-clean | \
  92     ls-append-sdhead $(1) | pad-to 16M | \
  93     append-kernel | pad-to $(LS_SD_ROOTFSPART_OFFSET)M | \
  94     append-rootfs | check-size $(LS_SD_IMAGE_SIZE) | append-metadata
  95 endef
  96 TARGET_DEVICES += fsl_ls1012a-frwy-sdboot
  97
  98 define Device/fsl_ls1043a-rdb
  99   DEVICE_VENDOR := NXP
 100   DEVICE_MODEL := LS1043A-RDB
 101   DEVICE_VARIANT := Default
 102   DEVICE_PACKAGES += \
 103     layerscape-fman \
 104     tfa-ls1043a-rdb \
 105     fmc fmc-eth-config \
 106     kmod-hwmon-ina2xx \
 107     kmod-hwmon-lm90
 108   DEVICE_DTS := freescale/fsl-ls1043a-rdb-sdk
 109   IMAGE/firmware.bin := \
 110     ls-clean | \
 111     ls-append $(1)-bl2.pbl | pad-to 1M | \
 112     ls-append $(1)-fip.bin | pad-to 5M | \
 113     ls-append $(1)-uboot-env.bin | pad-to 9M | \
 114     ls-append $(1)-fman.bin | pad-to 15M | \
 115     ls-append-dtb $$(DEVICE_DTS) | pad-to 16M | \
 116     append-kernel | pad-to 32M | \
 117     append-rootfs | pad-rootfs | check-size
 118 endef
 119 TARGET_DEVICES += fsl_ls1043a-rdb
 120
 121 define Device/fsl_ls1043a-rdb-sdboot
 122   DEVICE_VENDOR := NXP
 123   DEVICE_MODEL := LS1043A-RDB
 124   DEVICE_VARIANT := SD Card Boot
 125   DEVICE_PACKAGES += \
 126     layerscape-fman \
 127     tfa-ls1043a-rdb-sdboot \
 128     fmc fmc-eth-config \
 129     kmod-hwmon-ina2xx \
 130     kmod-hwmon-lm90
 131   DEVICE_DTS := freescale/fsl-ls1043a-rdb-sdk
 132   FILESYSTEMS := ext4
 133   IMAGES := sdcard.img sysupgrade.bin
 134   IMAGE/sdcard.img := \
 135     ls-clean | \
 136     ls-append-sdhead $(1) | pad-to 4K | \
 137     ls-append $(1)-bl2.pbl | pad-to 1M | \
 138     ls-append $(1)-fip.bin | pad-to 5M | \
 139     ls-append $(1)-uboot-env.bin | pad-to 9M | \
 140     ls-append fsl_ls1043a-rdb-fman.bin | pad-to 15M | \
 141     ls-append-dtb $$(DEVICE_DTS) | pad-to 16M | \
 142     append-kernel | pad-to $(LS_SD_ROOTFSPART_OFFSET)M | \
 143     append-rootfs | check-size $(LS_SD_IMAGE_SIZE)
 144   IMAGE/sysupgrade.bin := \
 145     ls-clean | \
 146     ls-append-sdhead $(1) | pad-to 16M | \
 147     append-kernel | pad-to $(LS_SD_ROOTFSPART_OFFSET)M | \
 148     append-rootfs | check-size $(LS_SD_IMAGE_SIZE) | append-metadata
 149 endef
 150 TARGET_DEVICES += fsl_ls1043a-rdb-sdboot
 151
 152 define Device/fsl_ls1046a-rdb
 153   DEVICE_VENDOR := NXP
 154   DEVICE_MODEL := LS1046A-RDB
 155   DEVICE_VARIANT := Default
 156   DEVICE_PACKAGES += \
 157     layerscape-fman \
 158     tfa-ls1046a-rdb \
 159     fmc fmc-eth-config \
 160     kmod-hwmon-ina2xx \
 161     kmod-hwmon-lm90
 162   DEVICE_DTS := freescale/fsl-ls1046a-rdb-sdk
 163   IMAGE/firmware.bin := \
 164     ls-clean | \
 165     ls-append $(1)-bl2.pbl | pad-to 1M | \
 166     ls-append $(1)-fip.bin | pad-to 5M | \
 167     ls-append $(1)-uboot-env.bin | pad-to 9M | \
 168     ls-append $(1)-fman.bin | pad-to 15M | \
 169     ls-append-dtb $$(DEVICE_DTS) | pad-to 16M | \
 170     append-kernel | pad-to 32M | \
 171     append-rootfs | pad-rootfs | check-size
 172 endef
 173 TARGET_DEVICES += fsl_ls1046a-rdb
 174
 175 define Device/fsl_ls1046a-rdb-sdboot
 176   DEVICE_VENDOR := NXP
 177   DEVICE_MODEL := LS1046A-RDB
 178   DEVICE_VARIANT := SD Card Boot
 179   DEVICE_PACKAGES += \
 180     layerscape-fman \
 181     tfa-ls1046a-rdb-sdboot \
 182     fmc fmc-eth-config \
 183     kmod-hwmon-ina2xx \
 184     kmod-hwmon-lm90
 185   DEVICE_DTS := freescale/fsl-ls1046a-rdb-sdk
 186   FILESYSTEMS := ext4
 187   IMAGES := sdcard.img sysupgrade.bin
 188   IMAGE/sdcard.img := \
 189     ls-clean | \
 190     ls-append-sdhead $(1) | pad-to 4K | \
 191     ls-append $(1)-bl2.pbl | pad-to 1M | \
 192     ls-append $(1)-fip.bin | pad-to 5M | \
 193     ls-append $(1)-uboot-env.bin | pad-to 9M | \
 194     ls-append fsl_ls1046a-rdb-fman.bin | pad-to 15M | \
 195     ls-append-dtb $$(DEVICE_DTS) | pad-to 16M | \
 196     append-kernel | pad-to $(LS_SD_ROOTFSPART_OFFSET)M | \
 197     append-rootfs | check-size $(LS_SD_IMAGE_SIZE)
 198   IMAGE/sysupgrade.bin := \
 199     ls-clean | \
 200     ls-append-sdhead $(1) | pad-to 16M | \
 201     append-kernel | pad-to $(LS_SD_ROOTFSPART_OFFSET)M | \
 202     append-rootfs | check-size $(LS_SD_IMAGE_SIZE) | append-metadata
 203 endef
 204 TARGET_DEVICES += fsl_ls1046a-rdb-sdboot
 205
 206 define Device/fsl_ls1088a-rdb
 207   DEVICE_VENDOR := NXP
 208   DEVICE_MODEL := LS1088A-RDB
 209   DEVICE_VARIANT := Default
 210   DEVICE_PACKAGES += \
 211     layerscape-mc \
 212     layerscape-dpl \
 213     tfa-ls1088a-rdb \
 214     restool \
 215     kmod-hwmon-ina2xx \
 216     kmod-hwmon-lm90
 217   IMAGE/firmware.bin := \
 218     ls-clean | \
 219     ls-append $(1)-bl2.pbl | pad-to 1M | \
 220     ls-append $(1)-fip.bin | pad-to 5M | \
 221     ls-append $(1)-uboot-env.bin | pad-to 10M | \
 222     ls-append $(1)-mc.itb | pad-to 13M | \
 223     ls-append $(1)-dpl.dtb | pad-to 14M | \
 224     ls-append $(1)-dpc.dtb | pad-to 15M | \
 225     ls-append-dtb $$(DEVICE_DTS) | pad-to 16M | \
 226     append-kernel | pad-to 32M | \
 227     append-rootfs | pad-rootfs | check-size
 228 endef
 229 TARGET_DEVICES += fsl_ls1088a-rdb
 230
 231 define Device/fsl_ls1088a-rdb-sdboot
 232   DEVICE_VENDOR := NXP
 233   DEVICE_MODEL := LS1088A-RDB
 234   DEVICE_VARIANT := SD Card Boot
 235   DEVICE_PACKAGES += \
 236     layerscape-mc \
 237     layerscape-dpl \
 238     tfa-ls1088a-rdb-sdboot \
 239     restool \
 240     kmod-hwmon-ina2xx \
 241     kmod-hwmon-lm90
 242   DEVICE_DTS := freescale/fsl-ls1088a-rdb
 243   FILESYSTEMS := ext4
 244   IMAGES := sdcard.img sysupgrade.bin
 245   IMAGE/sdcard.img := \
 246     ls-clean | \
 247     ls-append-sdhead $(1) | pad-to 4K | \
 248     ls-append $(1)-bl2.pbl | pad-to 1M | \
 249     ls-append $(1)-fip.bin | pad-to 5M | \
 250     ls-append $(1)-uboot-env.bin | pad-to 10M | \
 251     ls-append fsl_ls1088a-rdb-mc.itb | pad-to 13M | \
 252     ls-append fsl_ls1088a-rdb-dpl.dtb | pad-to 14M | \
 253     ls-append fsl_ls1088a-rdb-dpc.dtb | pad-to 15M | \
 254     ls-append-dtb $$(DEVICE_DTS) | pad-to 16M | \
 255     append-kernel | pad-to $(LS_SD_ROOTFSPART_OFFSET)M | \
 256     append-rootfs | check-size $(LS_SD_IMAGE_SIZE)
 257   IMAGE/sysupgrade.bin := \
 258     ls-clean | \
 259     ls-append-sdhead $(1) | pad-to 16M | \
 260     append-kernel | pad-to $(LS_SD_ROOTFSPART_OFFSET)M | \
 261     append-rootfs | check-size $(LS_SD_IMAGE_SIZE) | append-metadata
 262 endef
 263 TARGET_DEVICES += fsl_ls1088a-rdb-sdboot
 264
 265 define Device/fsl_ls2088a-rdb
 266   DEVICE_VENDOR := NXP
 267   DEVICE_MODEL := LS2088ARDB
 268   DEVICE_PACKAGES += \
 269     layerscape-mc \
 270     layerscape-dpl \
 271     tfa-ls2088a-rdb \
 272     restool
 273   IMAGE/firmware.bin := \
 274     ls-clean | \
 275     ls-append $(1)-bl2.pbl | pad-to 1M | \
 276     ls-append $(1)-fip.bin | pad-to 5M | \
 277     ls-append $(1)-uboot-env.bin | pad-to 10M | \
 278     ls-append $(1)-mc.itb | pad-to 13M | \
 279     ls-append $(1)-dpl.dtb | pad-to 14M | \
 280     ls-append $(1)-dpc.dtb | pad-to 15M | \
 281     ls-append-dtb $$(DEVICE_DTS) | pad-to 16M | \
 282     append-kernel | pad-to 32M | \
 283     append-rootfs | pad-rootfs | check-size
 284 endef
 285 TARGET_DEVICES += fsl_ls2088a-rdb
 286
 287 define Device/traverse_ls1043
 288   DEVICE_VENDOR := Traverse
 289   DEVICE_MODEL := LS1043 Boards
 290   KERNEL_NAME := Image
 291   KERNEL_SUFFIX := -kernel.itb
 292   KERNEL_INSTALL := 1
 293   FDT_LOADADDR = 0x90000000
 294   FILESYSTEMS := ubifs
 295   MKUBIFS_OPTS := -m 1 -e 262016 -c 128
 296   DEVICE_PACKAGES += \
 297     layerscape-fman \
 298     uboot-envtools \
 299     kmod-i2c-mux-pca954x \
 300     kmod-hwmon-core \
 301     kmod-gpio-pca953x kmod-input-gpio-keys-polled \
 302     kmod-rtc-isl1208
 303   DEVICE_DESCRIPTION = \
 304     Build images for Traverse LS1043 boards. This generates a single image \
 305     capable of booting on any of the boards in this family.
 306   DEVICE_DTS = freescale/traverse-ls1043s
 307   DEVICE_DTS_DIR = $(LINUX_DIR)/arch/arm64/boot/dts
 308   DEVICE_DTS_CONFIG = ls1043s
 309   KERNEL := kernel-bin | gzip | traverse-fit gzip $$(DTS_DIR)/$$(DEVICE_DTS).dtb $$(FDT_LOADADDR)
 310   KERNEL_INITRAMFS := kernel-bin | gzip | fit gzip $$(DTS_DIR)/$$(DEVICE_DTS).dtb $$(FDT_LOADADDR)
 311   IMAGES = root sysupgrade.bin
 312   IMAGE/root = append-rootfs
 313   IMAGE/sysupgrade.bin = sysupgrade-tar | append-metadata
 314   MKUBIFS_OPTS := -m 2048 -e 124KiB -c 4096
 315   SUPPORTED_DEVICES := traverse,ls1043s traverse,ls1043v
 316 endef
 317 TARGET_DEVICES += traverse_ls1043