target/linux/layerscape/image/armv8_64b.mk

   1 #
   2 # Copyright 2018-2020 NXP
   3 #
   4 # This is free software, licensed under the GNU General Public License v2.
   5 # See /LICENSE for more information.
   6 #
   7
   8 define Device/Default
   9   PROFILES := Default
  10   IMAGES := firmware.bin sysupgrade.bin
  11   FILESYSTEMS := squashfs
  12   KERNEL := kernel-bin | gzip | uImage gzip
  13   KERNEL_LOADADDR := 0x80080000
  14   KERNEL_ENTRY_POINT := 0x80080000
  15   DEVICE_DTS = freescale/$(subst _,-,$(1))
  16   SUPPORTED_DEVICES = $(subst _,$(comma),$(1))
  17   IMAGE_SIZE := 64m
  18   IMAGE/sysupgrade.bin := append-kernel | pad-to 16M | \
  19     append-rootfs | pad-rootfs | \
  20     check-size $(LS_SYSUPGRADE_IMAGE_SIZE) | append-metadata
  21 endef
  22
  23 define Device/fsl_ls1012a-frdm
  24   DEVICE_VENDOR := NXP
  25   DEVICE_MODEL := FRDM-LS1012A
  26   DEVICE_PACKAGES += \
  27     layerscape-ppfe \
  28     tfa-ls1012a-frdm \
  29     kmod-ppfe
  30   BLOCKSIZE := 256KiB
  31   IMAGE/firmware.bin := \
  32     ls-clean | \
  33     ls-append $(1)-bl2.pbl | pad-to 1M | \
  34     ls-append $(1)-fip.bin | pad-to 5M | \
  35     ls-append $(1)-uboot-env.bin | pad-to 10M | \
  36     ls-append pfe.itb | pad-to 15M | \
  37     ls-append-dtb $$(DEVICE_DTS) | pad-to 16M | \
  38     append-kernel | pad-to $$(BLOCKSIZE) | \
  39     append-rootfs | pad-rootfs | check-size
  40   IMAGE/sysupgrade.bin := append-kernel | pad-to $$(BLOCKSIZE) | \
  41     append-rootfs | pad-rootfs | \
  42     check-size $(LS_SYSUPGRADE_IMAGE_SIZE) | append-metadata
  43   KERNEL := kernel-bin | gzip | fit gzip $$(DTS_DIR)/$$(DEVICE_DTS).dtb
  44   KERNEL_INITRAMFS := kernel-bin | fit none $$(DTS_DIR)/$$(DEVICE_DTS).dtb
  45 endef
  46 TARGET_DEVICES += fsl_ls1012a-frdm
  47
  48 define Device/fsl_ls1012a-rdb
  49   DEVICE_VENDOR := NXP
  50   DEVICE_MODEL := LS1012A-RDB
  51   DEVICE_PACKAGES += \
  52     layerscape-ppfe \
  53     tfa-ls1012a-rdb \
  54     kmod-ppfe
  55   IMAGE/firmware.bin := \
  56     ls-clean | \
  57     ls-append $(1)-bl2.pbl | pad-to 1M | \
  58     ls-append $(1)-fip.bin | pad-to 5M | \
  59     ls-append $(1)-uboot-env.bin | pad-to 10M | \
  60     ls-append pfe.itb | pad-to 15M | \
  61     ls-append-dtb $$(DEVICE_DTS) | pad-to 16M | \
  62     append-kernel | pad-to 32M | \
  63     append-rootfs | pad-rootfs | check-size
  64 endef
  65 TARGET_DEVICES += fsl_ls1012a-rdb
  66
  67 define Device/fsl_ls1012a-frwy-sdboot
  68   DEVICE_VENDOR := NXP
  69   DEVICE_MODEL := FRWY-LS1012A
  70   DEVICE_PACKAGES += \
  71     layerscape-ppfe \
  72     tfa-ls1012a-frwy-sdboot \
  73     kmod-ppfe
  74   DEVICE_DTS := freescale/fsl-ls1012a-frwy
  75   FILESYSTEMS := ext4
  76   IMAGES := firmware.bin sdcard.img sysupgrade.bin
  77   IMAGE/firmware.bin := \
  78     ls-clean | \
  79     ls-append $(1)-bl2.pbl | pad-to 128K | \
  80     ls-append pfe.itb | pad-to 384K | \
  81     ls-append $(1)-fip.bin | pad-to 1856K | \
  82     ls-append $(1)-uboot-env.bin | pad-to 2048K | \
  83     check-size 2097153
  84   IMAGE/sdcard.img := \
  85     ls-clean | \
  86     ls-append-sdhead $(1) | pad-to 15M | \
  87     ls-append-dtb $$(DEVICE_DTS) | pad-to 16M | \
  88     append-kernel | pad-to $(LS_SD_ROOTFSPART_OFFSET)M | \
  89     append-rootfs | check-size $(LS_SD_IMAGE_SIZE)
  90   IMAGE/sysupgrade.bin := \
  91     ls-clean | \
  92     ls-append-sdhead $(1) | pad-to 16M | \
  93     append-kernel | pad-to $(LS_SD_ROOTFSPART_OFFSET)M | \
  94     append-rootfs | check-size $(LS_SD_IMAGE_SIZE) | append-metadata
  95 endef
  96 TARGET_DEVICES += fsl_ls1012a-frwy-sdboot
  97
  98 define Device/fsl_ls1043a-rdb
  99   DEVICE_VENDOR := NXP
 100   DEVICE_MODEL := LS1043A-RDB
 101   DEVICE_VARIANT := Default
 102   DEVICE_PACKAGES += \
 103     layerscape-fman \
 104     tfa-ls1043a-rdb \
 105     fmc fmc-eth-config \
 106     kmod-ahci-qoriq \
 107     kmod-hwmon-ina2xx \
 108     kmod-hwmon-lm90
 109   DEVICE_DTS := freescale/fsl-ls1043a-rdb-sdk
 110   IMAGE/firmware.bin := \
 111     ls-clean | \
 112     ls-append $(1)-bl2.pbl | pad-to 1M | \
 113     ls-append $(1)-fip.bin | pad-to 5M | \
 114     ls-append $(1)-uboot-env.bin | pad-to 9M | \
 115     ls-append $(1)-fman.bin | pad-to 15M | \
 116     ls-append-dtb $$(DEVICE_DTS) | pad-to 16M | \
 117     append-kernel | pad-to 32M | \
 118     append-rootfs | pad-rootfs | check-size
 119 endef
 120 TARGET_DEVICES += fsl_ls1043a-rdb
 121
 122 define Device/fsl_ls1043a-rdb-sdboot
 123   DEVICE_VENDOR := NXP
 124   DEVICE_MODEL := LS1043A-RDB
 125   DEVICE_VARIANT := SD Card Boot
 126   DEVICE_PACKAGES += \
 127     layerscape-fman \
 128     tfa-ls1043a-rdb-sdboot \
 129     fmc fmc-eth-config \
 130     kmod-ahci-qoriq \
 131     kmod-hwmon-ina2xx \
 132     kmod-hwmon-lm90
 133   DEVICE_DTS := freescale/fsl-ls1043a-rdb-sdk
 134   FILESYSTEMS := ext4
 135   IMAGES := sdcard.img sysupgrade.bin
 136   IMAGE/sdcard.img := \
 137     ls-clean | \
 138     ls-append-sdhead $(1) | pad-to 4K | \
 139     ls-append $(1)-bl2.pbl | pad-to 1M | \
 140     ls-append $(1)-fip.bin | pad-to 5M | \
 141     ls-append $(1)-uboot-env.bin | pad-to 9M | \
 142     ls-append fsl_ls1043a-rdb-fman.bin | pad-to 15M | \
 143     ls-append-dtb $$(DEVICE_DTS) | pad-to 16M | \
 144     append-kernel | pad-to $(LS_SD_ROOTFSPART_OFFSET)M | \
 145     append-rootfs | check-size $(LS_SD_IMAGE_SIZE)
 146   IMAGE/sysupgrade.bin := \
 147     ls-clean | \
 148     ls-append-sdhead $(1) | pad-to 16M | \
 149     append-kernel | pad-to $(LS_SD_ROOTFSPART_OFFSET)M | \
 150     append-rootfs | check-size $(LS_SD_IMAGE_SIZE) | append-metadata
 151 endef
 152 TARGET_DEVICES += fsl_ls1043a-rdb-sdboot
 153
 154 define Device/fsl_ls1046a-rdb
 155   DEVICE_VENDOR := NXP
 156   DEVICE_MODEL := LS1046A-RDB
 157   DEVICE_VARIANT := Default
 158   DEVICE_PACKAGES += \
 159     layerscape-fman \
 160     tfa-ls1046a-rdb \
 161     fmc fmc-eth-config \
 162     kmod-ahci-qoriq \
 163     kmod-hwmon-ina2xx \
 164     kmod-hwmon-lm90
 165   DEVICE_DTS := freescale/fsl-ls1046a-rdb-sdk
 166   IMAGE/firmware.bin := \
 167     ls-clean | \
 168     ls-append $(1)-bl2.pbl | pad-to 1M | \
 169     ls-append $(1)-fip.bin | pad-to 5M | \
 170     ls-append $(1)-uboot-env.bin | pad-to 9M | \
 171     ls-append $(1)-fman.bin | pad-to 15M | \
 172     ls-append-dtb $$(DEVICE_DTS) | pad-to 16M | \
 173     append-kernel | pad-to 32M | \
 174     append-rootfs | pad-rootfs | check-size
 175 endef
 176 TARGET_DEVICES += fsl_ls1046a-rdb
 177
 178 define Device/fsl_ls1046a-rdb-sdboot
 179   DEVICE_VENDOR := NXP
 180   DEVICE_MODEL := LS1046A-RDB
 181   DEVICE_VARIANT := SD Card Boot
 182   DEVICE_PACKAGES += \
 183     layerscape-fman \
 184     tfa-ls1046a-rdb-sdboot \
 185     fmc fmc-eth-config \
 186     kmod-ahci-qoriq \
 187     kmod-hwmon-ina2xx \
 188     kmod-hwmon-lm90
 189   DEVICE_DTS := freescale/fsl-ls1046a-rdb-sdk
 190   FILESYSTEMS := ext4
 191   IMAGES := sdcard.img sysupgrade.bin
 192   IMAGE/sdcard.img := \
 193     ls-clean | \
 194     ls-append-sdhead $(1) | pad-to 4K | \
 195     ls-append $(1)-bl2.pbl | pad-to 1M | \
 196     ls-append $(1)-fip.bin | pad-to 5M | \
 197     ls-append $(1)-uboot-env.bin | pad-to 9M | \
 198     ls-append fsl_ls1046a-rdb-fman.bin | pad-to 15M | \
 199     ls-append-dtb $$(DEVICE_DTS) | pad-to 16M | \
 200     append-kernel | pad-to $(LS_SD_ROOTFSPART_OFFSET)M | \
 201     append-rootfs | check-size $(LS_SD_IMAGE_SIZE)
 202   IMAGE/sysupgrade.bin := \
 203     ls-clean | \
 204     ls-append-sdhead $(1) | pad-to 16M | \
 205     append-kernel | pad-to $(LS_SD_ROOTFSPART_OFFSET)M | \
 206     append-rootfs | check-size $(LS_SD_IMAGE_SIZE) | append-metadata
 207 endef
 208 TARGET_DEVICES += fsl_ls1046a-rdb-sdboot
 209
 210 define Device/fsl_ls1088a-rdb
 211   DEVICE_VENDOR := NXP
 212   DEVICE_MODEL := LS1088A-RDB
 213   DEVICE_VARIANT := Default
 214   DEVICE_PACKAGES += \
 215     layerscape-mc \
 216     layerscape-dpl \
 217     tfa-ls1088a-rdb \
 218     restool \
 219     kmod-ahci-qoriq \
 220     kmod-hwmon-ina2xx \
 221     kmod-hwmon-lm90
 222   IMAGE/firmware.bin := \
 223     ls-clean | \
 224     ls-append $(1)-bl2.pbl | pad-to 1M | \
 225     ls-append $(1)-fip.bin | pad-to 5M | \
 226     ls-append $(1)-uboot-env.bin | pad-to 10M | \
 227     ls-append $(1)-mc.itb | pad-to 13M | \
 228     ls-append $(1)-dpl.dtb | pad-to 14M | \
 229     ls-append $(1)-dpc.dtb | pad-to 15M | \
 230     ls-append-dtb $$(DEVICE_DTS) | pad-to 16M | \
 231     append-kernel | pad-to 32M | \
 232     append-rootfs | pad-rootfs | check-size
 233 endef
 234 TARGET_DEVICES += fsl_ls1088a-rdb
 235
 236 define Device/fsl_ls1088a-rdb-sdboot
 237   DEVICE_VENDOR := NXP
 238   DEVICE_MODEL := LS1088A-RDB
 239   DEVICE_VARIANT := SD Card Boot
 240   DEVICE_PACKAGES += \
 241     layerscape-mc \
 242     layerscape-dpl \
 243     tfa-ls1088a-rdb-sdboot \
 244     restool \
 245     kmod-ahci-qoriq \
 246     kmod-hwmon-ina2xx \
 247     kmod-hwmon-lm90
 248   DEVICE_DTS := freescale/fsl-ls1088a-rdb
 249   FILESYSTEMS := ext4
 250   IMAGES := sdcard.img sysupgrade.bin
 251   IMAGE/sdcard.img := \
 252     ls-clean | \
 253     ls-append-sdhead $(1) | pad-to 4K | \
 254     ls-append $(1)-bl2.pbl | pad-to 1M | \
 255     ls-append $(1)-fip.bin | pad-to 5M | \
 256     ls-append $(1)-uboot-env.bin | pad-to 10M | \
 257     ls-append fsl_ls1088a-rdb-mc.itb | pad-to 13M | \
 258     ls-append fsl_ls1088a-rdb-dpl.dtb | pad-to 14M | \
 259     ls-append fsl_ls1088a-rdb-dpc.dtb | pad-to 15M | \
 260     ls-append-dtb $$(DEVICE_DTS) | pad-to 16M | \
 261     append-kernel | pad-to $(LS_SD_ROOTFSPART_OFFSET)M | \
 262     append-rootfs | check-size $(LS_SD_IMAGE_SIZE)
 263   IMAGE/sysupgrade.bin := \
 264     ls-clean | \
 265     ls-append-sdhead $(1) | pad-to 16M | \
 266     append-kernel | pad-to $(LS_SD_ROOTFSPART_OFFSET)M | \
 267     append-rootfs | check-size $(LS_SD_IMAGE_SIZE) | append-metadata
 268 endef
 269 TARGET_DEVICES += fsl_ls1088a-rdb-sdboot
 270
 271 define Device/fsl_ls2088a-rdb
 272   DEVICE_VENDOR := NXP
 273   DEVICE_MODEL := LS2088ARDB
 274   DEVICE_PACKAGES += \
 275     layerscape-mc \
 276     layerscape-dpl \
 277     tfa-ls2088a-rdb \
 278     restool \
 279     kmod-ahci-qoriq
 280   IMAGE/firmware.bin := \
 281     ls-clean | \
 282     ls-append $(1)-bl2.pbl | pad-to 1M | \
 283     ls-append $(1)-fip.bin | pad-to 5M | \
 284     ls-append $(1)-uboot-env.bin | pad-to 10M | \
 285     ls-append $(1)-mc.itb | pad-to 13M | \
 286     ls-append $(1)-dpl.dtb | pad-to 14M | \
 287     ls-append $(1)-dpc.dtb | pad-to 15M | \
 288     ls-append-dtb $$(DEVICE_DTS) | pad-to 16M | \
 289     append-kernel | pad-to 32M | \
 290     append-rootfs | pad-rootfs | check-size
 291 endef
 292 TARGET_DEVICES += fsl_ls2088a-rdb
 293
 294 define Device/traverse_ls1043
 295   DEVICE_VENDOR := Traverse
 296   DEVICE_MODEL := LS1043 Boards
 297   KERNEL_NAME := Image
 298   KERNEL_SUFFIX := -kernel.itb
 299   KERNEL_INSTALL := 1
 300   FDT_LOADADDR = 0x90000000
 301   FILESYSTEMS := ubifs
 302   MKUBIFS_OPTS := -m 1 -e 262016 -c 128
 303   DEVICE_PACKAGES += \
 304     layerscape-fman \
 305     uboot-envtools \
 306     kmod-i2c-mux-pca954x \
 307     kmod-hwmon-core \
 308     kmod-gpio-pca953x kmod-input-gpio-keys-polled \
 309     kmod-rtc-isl1208
 310   DEVICE_DESCRIPTION = \
 311     Build images for Traverse LS1043 boards. This generates a single image \
 312     capable of booting on any of the boards in this family.
 313   DEVICE_DTS = freescale/traverse-ls1043s
 314   DEVICE_DTS_DIR = $(LINUX_DIR)/arch/arm64/boot/dts
 315   DEVICE_DTS_CONFIG = ls1043s
 316   KERNEL := kernel-bin | gzip | traverse-fit gzip $$(DTS_DIR)/$$(DEVICE_DTS).dtb $$(FDT_LOADADDR)
 317   KERNEL_INITRAMFS := kernel-bin | gzip | fit gzip $$(DTS_DIR)/$$(DEVICE_DTS).dtb $$(FDT_LOADADDR)
 318   IMAGES = root sysupgrade.bin
 319   IMAGE/root = append-rootfs
 320   IMAGE/sysupgrade.bin = sysupgrade-tar | append-metadata
 321   MKUBIFS_OPTS := -m 2048 -e 124KiB -c 4096
 322   SUPPORTED_DEVICES := traverse,ls1043s traverse,ls1043v
 323 endef
 324 TARGET_DEVICES += traverse_ls1043