target/linux/layerscape/patches-5.4/302-dts-0083-arm64-ls1028a-qds-correct-bus-of-rtc.patch

   1 From d4c7270a63b1d78b89d91f74d782cce2a2bd9690 Mon Sep 17 00:00:00 2001
   2 From: Biwen Li <biwen.li@nxp.com>
   3 Date: Wed, 4 Sep 2019 11:39:30 +0800
   4 Subject: [PATCH] arm64: ls1028a-qds: correct bus of rtc
   5
   6 The rtc is on i2c2 bus(hardware), not on i2c1 channel 3,
   7 so correct it
   8
   9 Signed-off-by: Biwen Li <biwen.li@nxp.com>
  10 ---
  11  arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts | 13 ++++++++-----
  12  1 file changed, 8 insertions(+), 5 deletions(-)
  13
  14 --- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts
  15 +++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts
  16 @@ -169,11 +169,6 @@
  17                                 vcc-supply = <&sb_3v3>;
  18                         };
  19
  20 -                       rtc@51 {
  21 -                               compatible = "nxp,pcf2129";
  22 -                               reg = <0x51>;
  23 -                       };
  24 -
  25                         eeprom@56 {
  26                                 compatible = "atmel,24c512";
  27                                 reg = <0x56>;
  28 @@ -217,6 +212,14 @@
  29
  30  };
  31
  32 +&i2c1 {
  33 +       status = "okay";
  34 +       rtc@51 {
  35 +               compatible = "nxp,pcf2129";
  36 +               reg = <0x51>;
  37 +       };
  38 +};
  39 +
  40  &enetc_port1 {
  41         phy-handle = <&qds_phy1>;
  42         phy-connection-type = "rgmii-id";